[ovirt-users] Ovirt Node

Hello users, I installed ovirt engine 4.1.3.5-1.el7.centos and I tried to install 2 hosts, but the result was " install failed". Both nodes have been installes from CD image. What can I do? Thanks, Josep Vicent Roselló Vila Àrea de Sistemes d'Informació i Comunicacions

[ovirt-users] oVirt Node

Hi, I want to migrate my hosts from centos centoes 6.x to 7.x and at the same time move from a normal installation centos with then installed oVirt to oVirt node. But I noticed that there is not always the latest release of oVirt node, for example, the latest version of oVirt node is 3.5.2 and the

[ovirt-users] oVirt-node

Hi Is there a way to deploy vms on the ovirt node without using the oVirt engine? Thanks, Nagaraju ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.h

[ovirt-users] oVirt Node

Hello! We want to switch OS based oVirt instalation to oVirt-Node based. Is it safe to have OS based hosts and oVirt-Node hosts in the same cluster (with FC shared storage) during transition ? Thank you. ___ Users mailing list -- users@ovirt.org To unsub

[ovirt-users] ovirt node

Hello Guys I installed oVirt Node 4.4 and I want to deploy Hosted Engine but i get this error [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "hostname 'ovir

[ovirt-users] ovirt node iso?

Hi, I wish to test the advanced foreman integration with node deploy again but the node iso available is about a month old. http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140630.el6.iso Also it didn't work properly on the first test day Doesn't it need te

[ovirt-users] Ovirt Node migration

I like to know if a node adopted by a ovirt engine can safely adopted by a new ovirt engine, keeping all running vms in local storage mode, ovirt node 3.4, new ovirt engine 3.5 Thanks Juan Carlos Lin Unisoft S.A. +595-993-288330 --- "Antes d

[ovirt-users] oVirt Node roadmap

Hey, in the last few months the Node team spent a lot of efforts in stabilizing Node by closing tons of bugs, rebasing Node onto CentOS 7.2, and in addition adding features like Hosted-Engine - to get Node in shape for the recently released oVirt 3.6.0. But we were also seeing how Node is showing

Re: [ovirt-users] Ovirt Node

Josep, these Hosts was CentOS Minimal Install or were oVirt-Node-NG images ? If they were CentOS Minimal install you must install vsdm before adding the host to oVirt Engine. Fernando On 25/07/2017 14:13, Jose Vicente Rosello Vila wrote: Hello users, I installed ovirt engine 4.1.3.5-1.el7.

Re: [ovirt-users] Ovirt Node

On Tuesday, July 25, 2017 3:39:12 PM EDT FERNANDO FREDIANI wrote: > Josep, these Hosts was CentOS Minimal Install or were oVirt-Node-NG > images ? If they were CentOS Minimal install you must install vsdm > before adding the host to oVirt Engine. > > Fernando > If it was a minimal centos then he

[ovirt-users] oVirt Node TUI

What happened with the TUI ? Have just installed a 4.1 oVirt Node and it seems it is CLI only and I only see a shell login. Is it correct ? I read some pages on ovirt.org saying the old TUI was problematic and it was being redesign but that seems old. Or do I understand correctly and everythi

[ovirt-users] ovirt Node Building

Hello, I have recently build ovirt-engine from source using this link( http://www.ovirt.org/develop/developer-guide/engine/engine-development-environment/). Now I want to build ovirt node using this( http://www.ovirt.org/develop/projects/node/building/). I am confused that can I build that node on

[ovirt-users] ovirt node 4.1.1.1

Hey guys, Yesterday I've upgraded my Ovirt Node 4.1.0 to 4.1.1.1 version. Everything looks fine except Network configuration part is missing. If I enter manually in url (/network) like in the older version - I get Not Found error. I've roll backed to previous version - network configuration part

[ovirt-users] oVirt Node 3.6

Hi, I attempted to download the oVirt Node 3.6 from http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-iso/ and I also find there is another ovirt-node-ng. Which one should we download. I downloaded the one at http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-is

[ovirt-users] ovirt node upgrade

Hi guys! I want to upgrade my oVirt nodes from oVirt Node - 3.6 - 0.999.201607061021.el7.centos to ovirt-node-ng-installer-ovirt-4.0-2016062412. I want to use the ovirt-engine GUI for it. I already installed oVirrt-engine version 4.0 and the ovirt-node-ng-image squashfs image version 4.0.0. I don't

[ovirt-users] oVirt Node 3.6

Hey Guys New to the group, I have got the controller installed and it's working fine. Now I have burned an ISO of oVirt Node 3.6 this one is the one I used ovirt-node-ng-installer-ovirt-3.6-2016052403. I am getting an error when I try to install it on the server it fails during the ins

Re: [ovirt-users] oVirt Node

We had this same issue after 3.5.2 and I forget the reason why the official build hasn’t been released, but we were pointed in the direction of using the nightly build from Jenkins: http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/ I can vouch that ovirt-node-iso-3.5-0.99

Re: [ovirt-users] oVirt Node

On Tue, Oct 20, 2015 at 4:55 PM, Patrick Russell wrote: > We had this same issue after 3.5.2 and I forget the reason why the official > build hasn’t been released, but we were pointed in the direction of using > the nightly build from Jenkins: > > http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_

[ovirt-users] Ovirt Node Installtion

1. I install the ovirt node 4.2 in KVM on centos 7. when i try to install package or yum update it shows the message" Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Please verify its path and try again Uploading Enabled Repositories Report Loaded plugins: fastestmirror, produ

[ovirt-users] ovirt node install

Hello, on the latest version of the oVirt-node install running nodectl info gives the error Traceback (most recent call last): File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/usr/lib64/python2.7/runpy.py", l

[ovirt-users] oVirt Node Crash

Hi Everybody, I have built a new host which has been running fine for the last couple of days. I noticed today that the host crashed, but it is not giving me a reason as to why. It happened at 13:45 today, but I have given time before that on the logs as well. Is there something I am missing

[ovirt-users] ovirt node NonResponsive

Hello, I have ovirt with two nodes and one that are NonResponsive and and cant manage them because they are in Unknown state. It seems that nodes lost connection for a while with their gateway. The node (ovirt2) however is having consistent problems. The follow sequence of events is reproducibl

[ovirt-users] ovirt node NonResponsive

Hello, I have ovirt with two nodes and one that are NonResponsive and and cant manage them because they are in Unknown state. It seems that nodes lost connection for a while with their gateway. The node (ovirt2) however is having consistent problems. The follow sequence of events is reproducibl

[ovirt-users] oVirt Node as vm

Hello, I want to run oVirt Node as vm to learn a little bit about ovirt. But I'm facing some problems. I understand that oVirt Node maybe needs to see the vmx feature from the cpu so that kvm will work. But I can't get the oVirt Node ISO booting at all. I tried it in VirtualBox ... since it doe

Re: [ovirt-users] ovirt node iso?

Hey Jorick, I really appreciate that you are looking for a new ISO. We were actually abotu to release a new ISO, but then we discovered an issue with SELinux. We hope to be able to release a new iso shortly. Greetings fabian - Original Message - > Hi, > > I wish to test the advanced

Re: [ovirt-users] ovirt node iso?

Cheers - I'll look for it & give it a go. Could I ask if an install-to-host option is available? Also that the memtest & image integrity tests are available at boot. I've also noted that there are not corresponding MD5 sums of images available on sites, so it's tricky to validate/verify the int

Re: [ovirt-users] ovirt node iso?

Hey Jaco, - Original Message - > Cheers - I'll look for it & give it a go. > > Could I ask if an install-to-host option is available? > Also that the memtest & image integrity tests are available at boot. Yep - The installation is the default option. > I've also noted that there are not

Re: [ovirt-users] Ovirt Node migration

On 11/01/2014 11:17 AM, Juan Carlos YJ. Lin wrote: I like to know if a node adopted by a ovirt engine can safely adopted by a new ovirt engine, keeping all running vms in local storage mode, ovirt node 3.4, new ovirt engine 3.5 3.4 - no, unless you export/import all vm's. 3.5 - should be ok via

Re: [ovirt-users] Ovirt Node migration

- Original Message - > From: "Itamar Heim" > To: "Juan Carlos YJ Lin" , users@ovirt.org, "Maor > Lipchuk" , "Allon > Mureinik" > Sent: Tuesday, November 4, 2014 3:00:06 AM > Subject: Re: [ovirt-users] Ovirt Node migration >

[ovirt-users] Ovirt Node Heartbeat Settings

Hi, I want to know more about the Ovirt engine and host node heartbeat settings and intervalthat means how and when the engine node consider the host node as dead or shoot the command to fence it for reboot Is there any way to modify those interval and settings to prevent the false-positi

[ovirt-users] oVirt node weekly talk

Hello Fabian Can we move the oVirt node weekly talk to another week day? Or just a bit earlier ? Best Regards. Tolik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Node 3.5 status

Hi, If you are looking for oVirt Node 3.5, we will deliver the official ISO as soon as the package which resolves the below bugzilla is available in CentOS repo. The current version of nss-softokn package is affecting the build of iso. nss-softokn prevents dracut from building the initrd htt

[ovirt-users] ovirt node 3.6 stable

hello, which link to download the stable version of oVirt node 3.6? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Node with bcache

Hello I just wanted to share a scenario with you and perhaps exchange more information with other people that may also have a similar scenario. For a couple of months I have been running a oVirt Node (CentOS 7.3 Minimal) with bcache (https://bcache.evilpiepirate.org/) for caching a SSD with

[ovirt-users] oVirt Node update question

hi, i still don't completely understand the oVirt Node update process and the involved rpm packages. We have 4 nodes, all running oVirt Node 4.1.3. Three of them show as available updates 'ovirt-node-ng-image-update-4.1.6-0.1.rc1.20170823083853.gitd646d2f.el7.centos' (i don't want run relea

[ovirt-users] oVirt-node and freeipa

Hi all, Using oVirt 4.1 using FreeIPA for authentication for oVirt Manager is quite straight forward. Now, for the hypervisor I'm using oVirt-node. OK, I do not much login on the hypervisor it self, but it would be nice to integrate oVirt-node with FreeIPA

[ovirt-users] oVirt node and NFS

Hi, This is probably an easy thing, but I can't seem to find the solution. On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach, but I noticed that the firewall is not open for that on the host. So, how to I configure the Nodes firewall? Regards Magnus Isaksson

[ovirt-users] ovirt-node-ng-update

Hi all, I didn't find any explicit howto about upgrade of ovirt-node, but I may mistake... However, here is what I guess: after installing a fresh ovirt-node-ng  iso, the engine check upgrade finds an available update "ovirt-node-ng-image-update" But, the available update is the same as th

Re: [ovirt-users] oVirt Node TUI

Ola Fernando! On 01/30/2017 09:23 AM, Fernando Frediani wrote: What happened with the TUI ? Have just installed a 4.1 oVirt Node and it seems it is CLI only and I only see a shell login. Is it correct ? I read some pages on ovirt.org saying the old TUI was problematic and it was being redesign

Re: [ovirt-users] oVirt Node TUI

Hi Douglas, thanks. No, just said if I have no network connectivity to the box for some reason only tool to use is shell to try to get it back online correct ? It TUI thought to be back sometime or Cockpit will be the ongoing tool for that ? (I find it nice the TUI interface too). Fernando

Re: [ovirt-users] oVirt Node TUI

Oi Fernando, On 01/30/2017 12:32 PM, Fernando Frediani wrote: Hi Douglas, thanks. No, just said if I have no network connectivity to the box for some reason only tool to use is shell to try to get it back online correct ? Yes, you might use manual settings or TUI tools like nmtui as any other

Re: [ovirt-users] oVirt Node TUI

On Tue, Jan 31, 2017 at 2:02 AM, Douglas Schilling Landgraf wrote: > Oi Fernando, > > On 01/30/2017 12:32 PM, Fernando Frediani wrote: >> >> Hi Douglas, thanks. >> >> No, just said if I have no network connectivity to the box for some >> reason only tool to use is shell to try to get it back onlin

Re: [ovirt-users] oVirt Node 3.6

On Mon, May 16, 2016 at 2:09 PM, Anantha Raghava wrote: > Hi, > > I attempted to download the oVirt Node 3.6 from > http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-iso/ and I > also find there is another ovirt-node-ng. Which one should we download. > > I downloaded the one at > ht

Re: [ovirt-users] oVirt Node 3.6

Thanks Fabian. Will download, install and report back. -- Thanks & Regards, Anantha Raghava eXza Technology Consulting & Services On Tuesday 17 May 2016 01:45 PM, Fabian Deutsch wrote: On Mon, May 16, 2016 at 2:09 PM, Anantha Raghava wrote: Hi, I attempted to download the oVirt Node 3.6

Re: [ovirt-users] ovirt node upgrade

Hi Ariel, On 07/12/2016 10:49 AM, Ariel Pérez Rodríguez wrote: Hi guys! I want to upgrade my oVirt nodes from oVirt Node - 3.6 - 0.999.201607061021.el7.centos to ovirt-node-ng-installer-ovirt-4.0-2016062412. I want to use the ovirt-engine GUI for it. I already installed oVirrt-engine version

Re: [ovirt-users] oVirt Node 3.6

Hi Michael, On 08/11/2016 09:25 AM, Michael Cooper wrote: Hey Guys New to the group, I have got the controller installed and it's working fine. Now I have burned an ISO of oVirt Node 3.6 this one is the one I used ovirt-node-ng-installer-ovirt-3.6-2016052403. I am getting an error when

Re: [ovirt-users] oVirt Node 3.6

Hello Douglas, I was able to get this version (ovirt-node-iso-3.6-0.999.201608101021.el7.centos ) to work, I have added the link for the one I used for other folks

[ovirt-users] oVirt Node iso downoad

Hi, Where do we download a working oVirt Node ISO? Not finding the correct link. -- Thanks & Regards, Anantha Raghava eXza Technology Consulting & Services Do not print this e-mail unless required. Save Paper & trees. ___ Users mailing list User

[ovirt-users] oVirt node not installed

Hi, i try install oVirt node, but getting errors on step post-install script. Screen error in attachment. [cid:944CCD96-B8FF-4ABA-AF17-FA6A7DC184BB@digital-ecosystems.ru] [cid:8D77635B-AF62-4894-A9E2-F57E9F290DE5@digital-ecosystems.ru] ___ Users mailin

[ovirt-users] oVirt node LDAP auth

Hi, community! What is best way for LDAP auth on oVirt Node? Is it possible to use realmd to integarate with domain?___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/si

[ovirt-users] oVirt Node install failed

Hi all! The following error occurs during installation oVirt Node 4.2.8: EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during installation of Host hostname_ovirt_node2: Yum Cannot queue package dmidecode: Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Ple

[ovirt-users] Ovirt node Virus scan

Hi, I have to scan our 18 nodes with a virus scanner and I have to provide the report to our ito. This nodes have no internet connection and they will not get it. Which software I should use? Clamav? I can shutdown each single node and can scan but I would prefer to have it as cmd running

[ovirt-users] ovirt node Emulex network

ovirt-node-ng-installer-4.4.10-2022030308.el8 ovirt-node-ng-installer-4.4.10-2022030308 can't recognize network intefaces: 06:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC (be3) [19a2:0710] (rev 01) 06:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb

[ovirt-users] Ovirt node disk broken

Hi all, On a single Server the node disk is broken and I have to replace it. The glusterfs configuration is also gone but the glusterfs directorys are existing on a separate available disk. Did I have a Chance to install the ovirt Node on a New disk and make the old glusterfs running and als

[ovirt-users] oVirt - Node install on CentOS

Could anyone please confirm the correct process to run oVirt node on a standard CentOS install, rather than using the node iso? I'm currently doing the following: - Install CentOS 6.5 - Install qemu-kvm-rhev rpm's to resolve live snapshot issues on the CentOS supplied rpm's

Re: [ovirt-users] oVirt Node as vm

I have the same problem. Finally, I am not using oVirth Node ISO, I setup one step by step. And the key point is enable promiscuous mode on your ESXi vswitch, or you cann't ping double nested guest. On Fri, Jun 20, 2014 at 2:57 AM, Stefan Sahlender wrote: > Hello, > > I want to run oVirt Node as

Re: [ovirt-users] oVirt Node as vm

Hello John, thanks for your hint. Just for understanding, step by step installation means basically a minimal redhat / centos install and then adding the ovirt repo and run >>yum install vdsm vdsm-cli<< like described here: http://www.ovirt.org/Installing_VDSM_from_rpm or? Regards Am 20.06.20

Re: [ovirt-users] oVirt Node as vm

10/21/nested-virt-and-fedora-20-virt-test-day/ - Original Message - > From: "Stefan Sahlender" > To: users@ovirt.org > Sent: Thursday, June 19, 2014 2:57:12 PM > Subject: [ovirt-users] oVirt Node as vm > > Hello, > > I want to run oVirt Node as vm to le

Re: [ovirt-users] oVirt Node as vm

Yes, exactly! On Fri, Jun 20, 2014 at 4:04 PM, Stefan Sahlender wrote: > Hello John, > > thanks for your hint. > > Just for understanding, step by step installation means basically a > minimal redhat / centos install and then adding the ovirt repo and run >>>yum install vdsm vdsm-cli<< like descr

[ovirt-users] oVirt node vdsm certificate issue

Hi. I have configured Engine webservice to use certificate issued by internal CA. According to http://www.ovirt.org/Features/PKI the CA certificates must be in /etc/pki/ovirt-engine/apache-ca.pem. I have kept the self signed (Engine internal) certificate (previously linked from /etc/pki/ovirt-

Re: [ovirt-users] Ovirt Node Heartbeat Settings

Can anyone help me here ?? On Mon, Dec 15, 2014 at 4:37 PM, Punit Dambiwal wrote: > > Hi, > > I want to know more about the Ovirt engine and host node heartbeat > settings and intervalthat means how and when the engine node consider > the host node as dead or shoot the command to fence it for

Re: [ovirt-users] Ovirt Node Heartbeat Settings

It's quite a complex part of engine so feel free to ask Thanks Martin - Original Message - > From: "Punit Dambiwal" > To: users@ovirt.org, "Dan Kenigsberg" , "Itamar Heim" > > Sent: Monday, December 15, 2014 9:37:47 AM > Subject: [

Re: [ovirt-users] Ovirt Node Heartbeat Settings

ump#Fencing_flow_with_fence_kdump > > It's quite a complex part of engine so feel free to ask > > Thanks > > Martin > > - Original Message - > > From: "Punit Dambiwal" > > To: users@ovirt.org, "Dan Kenigsberg" , "Itamar >

Re: [ovirt-users] Ovirt Node Heartbeat Settings

- Original Message - > From: "Punit Dambiwal" > To: "Martin Perina" > Cc: users@ovirt.org, "Dan Kenigsberg" , "Itamar Heim" > > Sent: Tuesday, December 16, 2014 9:13:24 AM > Subject: Re: [ovirt-users] Ovirt Node Heartbeat Sett

Re: [ovirt-users] Ovirt Node Heartbeat Settings

r > Heim" > > Sent: Tuesday, December 16, 2014 9:13:24 AM > > Subject: Re: [ovirt-users] Ovirt Node Heartbeat Settings > > > > Hi Martin, > > > > Yes...I want to know the timeout after the host will be considered non > > responsive and fencing w

Re: [ovirt-users] Ovirt Node Heartbeat Settings

So I think option 2 is best solution for your issue. Martin - Original Message - > From: "Punit Dambiwal" > To: "Martin Perina" > Cc: users@ovirt.org, "Dan Kenigsberg" , "Itamar Heim" > > Sent: Wednesday, December 17, 2014 3:05

Re: [ovirt-users] oVirt node weekly talk

On 01/21/2015 10:05 AM, Tolik Litovsky wrote: Hello Fabian Can we move the oVirt node weekly talk to another week day? Or just a bit earlier ? Both are ok for me. -- Cheers Douglas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailm

Re: [ovirt-users] oVirt node weekly talk

- Original Message - > On 01/21/2015 10:05 AM, Tolik Litovsky wrote: > > Hello Fabian > > > > Can we move the oVirt node weekly talk to another week day? > > Or just a bit earlier ? > > Both are ok for me. Let's see: I'd suggest to move it to Mondays, 3 p.m. UTC Does that work for eve

Re: [ovirt-users] oVirt node weekly talk

> From: "Fabian Deutsch" > To: dougsl...@redhat.com > Cc: "Tolik Litovsky" , users@ovirt.org > Sent: Wednesday, 21 January, 2015 8:30:40 PM > Subject: Re: [ovirt-users] oVirt node weekly talk > > - Original Message - >> On 01/21/2015 1

[ovirt-users] ovirt-node 3.5 jenkins jobs

Hi The current version is 3.6 and there is no more 3.5 releases. Following these I disable the 3.5 build jobs on jenkins. -- Best regards Tolik Litovsky RHEV-H Team Red Hat Red Hat: trustworthy, transformative technology. Powered by the community. Connect at redhat.com _

Re: [ovirt-users] ovirt node 3.6 stable

Are you looking for this ? http://www.ovirt.org/download/ Or sudo yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm ? hello, which link to download the stable version of oVirt node 3.6? Thanks ___ Users mailing list Users@ovi

Re: [ovirt-users] ovirt node 3.6 stable

Yes, but i cant see the ovirt node 3.6 Thanks. Em 08/04/2016 16:47, "Arman Khalatyan" escreveu: > Are you looking for this ? > http://www.ovirt.org/download/ > Or > sudo yum localinstall > http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm ? > hello, > > which link to download the stabl

Re: [ovirt-users] ovirt node 3.6 stable

Doesn't exist yet, you can use 3.5 node stable or the nightly builds: http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.6_create-iso-el7_merged/ On Fri, Apr 8, 2016 at 11:04 PM, Marcelo Leandro wrote: > Yes, but i cant see the ovirt node 3.6 > > Thanks. > Em 08/04/2016 16:47, "Arman Khalatyan" es

Re: [ovirt-users] ovirt node 3.6 stable

On Mon, Apr 11, 2016 at 9:07 AM, Johan Kooijman wrote: > Doesn't exist yet, you can use 3.5 node stable or the nightly builds: > http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.6_create-iso-el7_merged/ > > On Fri, Apr 8, 2016 at 11:04 PM, Marcelo Leandro > wrote: > >> Yes, but i cant see the ovi

Re: [ovirt-users] oVirt Node with bcache

On Wed, Aug 16, 2017 at 4:37 PM, FERNANDO FREDIANI < fernando.fredi...@upx.com> wrote: > Hello > > I just wanted to share a scenario with you and perhaps exchange more > information with other people that may also have a similar scenario. > > For a couple of months I have been running a oVirt Node

Re: [ovirt-users] oVirt Node update question

Hi, oVirt node ng is shipped with a placeholder rpm preinstalled. The image-update rpms obsolete the placeholder rpm, so once a new image-update rpm is published, yum update will pull those packages. So you have 1 system that was a fresh install and the others were upgrades. Next, the post instal

Re: [ovirt-users] oVirt Node update question

Hi, thanks a lot. So i understand everything is fine with my nodes and i'll wait until the update GUI shows the right version to update (4.1.5 at the moment). Regards Matthias Am 2017-08-31 um 14:56 schrieb Yuval Turgeman: Hi, oVirt node ng is shipped with a placeholder rpm preinstalled.

Re: [ovirt-users] oVirt Node update question

Hi, Don't quite understand how you got to that 4.1.6 rc, it's only available in the pre release repo, can you paste the yum repos that are enabled on your system ? Thanks, Yuval. On Thu, Aug 31, 2017 at 4:19 PM, Matthias Leopold < matthias.leop...@meduniwien.ac.at> wrote: > Hi, > > thanks a lot

Re: [ovirt-users] oVirt Node update question

Hi, all of the nodes that already made updates in the past have /etc/yum.repos.d/ovirt-4.1-pre-dependencies.repo /etc/yum.repos.d/ovirt-4.1-pre.repo i went through the logs in /var/log/ovirt-engine/host-deploy/ and my own notes and discovered/remembered that this being presented with RC versi

Re: [ovirt-users] oVirt Node update question

Yes that would do it, thanks for the update :) On Thu, Aug 31, 2017 at 5:21 PM, Matthias Leopold < matthias.leop...@meduniwien.ac.at> wrote: > Hi, > > all of the nodes that already made updates in the past have > > /etc/yum.repos.d/ovirt-4.1-pre-dependencies.repo > /etc/yum.repos.d/ovirt-4.1-pre.

Re: [ovirt-users] oVirt Node update question

Hi Yuval, i updated my nodes from 4.1.3 to 4.1.6 today and noticed that the > /etc/yum.repos.d/ovirt-4.1-pre-dependencies.repo > /etc/yum.repos.d/ovirt-4.1-pre.repo files i moved away previously reappeared after rebooting, so i'm getting updates to 4.1.7-0.1.rc1.20170919143904.git0c14f

Re: [ovirt-users] oVirt Node update question

Hi Matthias, Basically, ovirt-node-ng is shipped as an image, and imgbased then syncs some files to the new lv so the user will get a new working image without breaking his configuration. It could be that some files were sync'ed across wrong, can you please attache /tmp/imgbased.log ? Also, whic

Re: [ovirt-users] oVirt-node and freeipa

2017-10-23 14:53 GMT+02:00 Winfried de Heiden : > Hi all, > > Using oVirt 4.1 using FreeIPA for authentication for oVirt Manager is > quite straight forward. Now, for the hypervisor I'm using oVirt-node. OK, I > do not much login on the hypervisor it self, but it would be nice to > integrate oVirt

Re: [ovirt-users] oVirt-node and freeipa

OK, clear. Thanks a lot! Winfried Op 23-10-17 om 16:35 schreef Sandro Bonazzola: 2017-10-23 14:53 GMT+02:00 Winfried de Heiden : Hi all,

Re: [ovirt-users] oVirt node and NFS

Anyone? //Magnus From: Magnus Isaksson Sent: den 20 november 2017 16:01 To: 'users@ovirt.org' Subject: oVirt node and NFS Hi, This is probably an easy thing, but I can't seem to find the solution. On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach, but I noticed tha

Re: [ovirt-users] oVirt node and NFS

Hi Mangnus, Have you tried the troubleshooting-nfs-storage-issues page? https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ *Regards,* *Shani Leviim* On Tue, Nov 21, 2017 at 12:26 PM, Magnus Isaksson wrote: > Anyone? > > > > //Magnus > > > > *From:*

Re: [ovirt-users] oVirt node and NFS

Hi if issue is really only NFS blocked by firewalld on host ( so you have correct permissions, ownerships on storage directory ), solution should be simple as: firewall-cmd --permanent --add-service=nfs firewall-cmd --permanent --add-service=mountd firewall-cmd --permanent --add-service=rpc-bind

Re: [ovirt-users] oVirt node and NFS

: users@ovirt.org Subject: Re: [ovirt-users] oVirt node and NFS Hi Mangnus, Have you tried the troubleshooting-nfs-storage-issues page? https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ Regards, Shani Leviim On Tue, Nov 21, 2017 at 12:26 PM, Magnus

[ovirt-users] oVirt Node ng upgrade failed

Hi, just tried to upgrade from ovirt-node-ng-4.1.1.1-0.20170504.0+1 to ovirt-node-ng-4.1.7-0.20171108.0+1 but it failed: ### 2017-11-23 10:19:21 INFO otopi.plugins.otopi.packagers.yumpackager yumpackager.info:80 Yum Verify: 1/4: ovirt-node-ng-image-update.noarch 0:4.1.7-1.el7.centos

Re: [ovirt-users] ovirt-node-ng-update

Hi, Which version are you using ? Thanks, Yuval. On Wed, Nov 29, 2017 at 4:17 PM, Nathanaël Blanchet wrote: > Hi all, > > I didn't find any explicit howto about upgrade of ovirt-node, but I may > mistake... > > However, here is what I guess: after installing a fresh ovirt-node-ng > iso, the en

Re: [ovirt-users] ovirt-node-ng-update

Le 30/11/2017 à 08:58, Yuval Turgeman a écrit : Hi, Which version are you using ? 4.1.7 Thanks, Yuval. On Wed, Nov 29, 2017 at 4:17 PM, Nathanaël Blanchet > wrote: Hi all, I didn't find any explicit howto about upgrade of ovirt-node, but I may mistak

Re: [ovirt-users] ovirt-node-ng-update

2 more questions - 1. Which ovirt repos are enabled on your node ? 2. Can you share the output from `rpm -qa | grep ovirt-node-ng` ? Thanks, Yuval. On Thu, Nov 30, 2017 at 11:02 AM, Nathanaël Blanchet wrote: > > > Le 30/11/2017 à 08:58, Yuval Turgeman a écrit : > > Hi, > > Which version are

Re: [ovirt-users] ovirt-node-ng-update

thanx for replying Le 30/11/2017 à 10:19, Yuval Turgeman a écrit : 2 more questions - 1.  Which ovirt repos are enabled on your node ? centos-opstools-release/x86_64   CentOS-7 - OpsTools - release  263 ovirt-4.1/7  Latest oVirt

[ovirt-users] oVirt Node 4.1.8 -> 4.2 upgrade

Good Morning, Perhaps someone could clarify for me, please - to update oVirt Nodes from 4.1.8 -> 4.2, should I just be able to yum install the 4.2 release file, then yum update? Or, do I have to start with the 4.2 ISO then update from there? When I try the former it fails with dependency issues

[ovirt-users] oVirt node local storage behavior

Hello, I have one server where i was installe oVirt node 4.1 and used in my infrastructure. It's used as single server cluster with local storage configured. I created separate volume for it and mounted as separate directory: [root@virt4 ~]# lvs LV VG Attr

[ovirt-users] Ovirt Node Next mass deploy

Hi list, starting from here (http://lists.ovirt.org/pipermail/devel/2016-January/012073.html) and adjusting broken links now I'm able to pxe boot CentOS 7 + kernel arguments: LABEL node_4 MENU LABEL Ovirt Node 4.0 KERNEL centos7/x86_64/vmlinuz APPEND initrd=centos7/x86_64/initrd.img ramdisk_siz

Re: [ovirt-users] oVirt Node iso downoad

On 10/26/2016 06:17 PM, Anantha Raghava wrote: Hi, Where do we download a working oVirt Node ISO? Not finding the correct link. -- Thanks & Regards, Anantha Raghava eXza Technology Consulting & Services Do not print this e-mail unless required. Save Paper & trees. __

Re: [ovirt-users] oVirt Node iso downoad

Hello Kasturi, I download and installed. But not getting any option to setup the engine information. When I try to add host from engine, it is reporting as the target is a hypervisor host and terminating the setup. How do I proceed further? -- Thanks & Regards, Anantha Raghava eXza Techn

Re: [ovirt-users] oVirt Node iso downoad

Hi Anantha, On 10/26/2016 09:41 AM, Anantha Raghava wrote: Hello Kasturi, I download and installed. But not getting any option to setup the engine information. That's correct, in 4.0 we register the host from engine. When I try to add host from engine, it is reporting as the target is a hyp

[ovirt-users] Ovirt node or Linux standard

Hi all, There is any reason to choose to install a CentOS 6/7 and add it to oVirt Manager instead of an oVirt Node ? It's just for managability or there is other technical reasons ? Thanks -- Kevin ___ Users mailing list Users@ovirt.org http:

  1   2   3   >