Hi,
On Fri, Sep 22, 2017 at 08:38:32PM +, Osvaldo Alcala (Ozzie) wrote:
> Thank you. I should have said that I did try the command that shows in the
> screenshot, but the required buffer size keeps changing: thus I get the same
> error every time.
So maybe in your script/application you ha
Thank you. I should have said that I did try the command that shows in the
screenshot, but the required buffer size keeps changing: thus I get the same
error every time.
Thanks
Oz
-Original Message-
From: Andrej Rode [mailto:m...@andrejro.de]
Sent: Friday, September 22, 2017 12:15 PM
Hi Billy. C674 is Kemet T495C107K016ATE200
CAP,SM,100UF,16V,10%,TANTALUM,6032.
Schematics for the B210 are available here:
http://files.ettus.com/schematics/b200/b210.pdf
-Robin
On Fri, Sep 22, 2017 at 8:23 PM, Billy Jones via USRP-users <
usrp-users@lists.ettus.com> wrote:
> I have been usi
I have been using a B210 board for about a week now to run OpenBTS and
OpenBTS-UMTS. I left the board powered on in its enclosure overnight, and when
I arrived in the morning discovered it not working, the power led flickering,
and my computer alerting that there was a USB power surge. I took
Hi,
On Fri, Sep 22, 2017 at 02:12:06AM +, Osvaldo Alcala (Ozzie) via USRP-users
wrote:
> Hi, I'm running with the Python API and I keep getting the following warning
> (see pic below). I go ahead and change the buffer size per the command
> listed, but I still get the warning again with di
Dear Oz,
what's the different numbers you get?
Also note that it's actually easier for us to read when you just copy
and paste the text instead of making a screenshot. Thanks!
Best regards,
Marcus
On 09/21/2017 07:12 PM, Osvaldo Alcala (Ozzie) via USRP-users wrote:
>
> Hi, I’m running with t
Dear Kobayashi-san,
You want to make sure the size of the network packets is as large as
possible to reduce overhead; UHD will print out the information of how
many bytes are in a single packet during initialization. You might need
to tell Linux that it needs to use a larger MTU (8000B should work
Hi Sylvain,
W dniu 22.09.2017 o 11:44, Sylvain Munaut pisze:
> Hi Piotr,
>
>
> And do you set both the Clock and Time source to the external ones
> when using it in that configuration ?
I think I have written this at least twice before. I will try again to
describe it again as clear as I can. Reci
Hi Piotr,
And do you set both the Clock and Time source to the external ones
when using it in that configuration ?
I just had a look at both the schematic and VHDL and there is actual
switches ... the GPSDO 10M and PPS should basically be completely
disconnected when the reference for time and c
Hi, all
I'm working in a LTE related system using Ettus X310, using UHD driver
on CentOS 7.3 base real-time kernel patched environment.
UHD driver version using is 3.9.6
Current master clock frequency is 184.32MHz, and sampling rate is
30.72MHz. 2 RX/TX antennas are used with 16bit I/Q
Hi, I'm running with the Python API and I keep getting the following warning
(see pic below). I go ahead and change the buffer size per the command listed,
but I still get the warning again with different numbers.
Is this normal? Will it cause any data loss? Anyway to fix?
Thanks!
Oz
[cid:ima
W dniu 21.09.2017 o 21:06, Marcus D. Leech via USRP-users pisze:
> On 09/21/2017 02:27 PM, Piotr Krysik via USRP-users wrote:
>>
>> --
>> Piotr Krysik
>>
>>
>> Also take into account that I'm not comparing phase signals observed by
>> two different USRPs. What I have shown is for single channel of
12 matches
Mail list logo
