Hi Marcus,
Thank you for your help.
2018-03-08 10:37 GMT+08:00 Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com>:
> On 03/07/2018 08:07 PM, liu Jong via USRP-users wrote:
>
> Hi all,
> Do you give us some advice?
> thank you.
>
> best regards
> Jon
>
> This is pretty-much what electro
On 03/07/2018 08:07 PM, liu Jong via USRP-users wrote:
Hi all,
Do you give us some advice?
thank you.
best regards
Jon
This is pretty-much what electronics *DOES*.
There will be harmonics of the master clock at some level, and only 5dB
above the noise is actually really good.
Unless each c
On 03/07/2018 06:29 PM, Brais Ares via USRP-users wrote:
Hello,
We are planning to use a B210 device in a project where there may be
high power interferences.
What would be the *maximum input power through a B210 RF _output_*__to
prevent damaging the device?
(The AD9361 datasheet indicates a
Hi Michael,
Thank you for your quick response! I wanted the payload to be QPSK modulated. I
put a QT Range blocks in for the gain settings on the ofdm_tx and ofdm_rx
flowgraphs. I still can’t seem to get any better than 20% BER though, but I
think the advice about doing a PER calculator is poin
Hi all,
we've had a bunch of great discussions on the packaging of FPGA images
(binaries) and on packaging UHD in general. Since there were many
different discussions, I'd like to summarize them all in one big email.
Thanks to Rick, Maitland, and Phil for providing feedback.
If you just use UHD v
Hi all,
Do you give us some advice?
thank you.
best regards
Jon
2018-03-06 11:48 GMT+08:00 liu Jong :
> Hi all,
> We test it with matlan2017b.But we don't think it does with softwere.
>
> best regards
> Jon
>
> 2018-03-05 10:29 GMT+08:00 liu Jong :
>
>> Hi all,
>> Any suggestion is welcome.
>>
>
Hi Brais,
You'll want to have an isolator/ciculator inline.
Regards,
Nate Temple
On Wed, Mar 7, 2018 at 3:29 PM, Brais Ares via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hello,
>
> We are planning to use a B210 device in a project where there may be high
> power interferences.
>
> What
Hello,
We are planning to use a B210 device in a project where there may be high
power interferences.
What would be the *maximum input power through a B210 RF output* to prevent
damaging the device?
(The AD9361 datasheet indicates an absolute maximum of 2.5 dBm for an RF
input, but it does not sp
Hello USRP users!
I'm in the process of writing code that reads from a USRP device. I'd like
to make sure that I'm calling things like they are expected to be called,
without having to connect and run against an actual device.
Towards this end, I was about to start by writing my own "test" devic
On 03/07/2018 12:04 PM, Hojoon Yang via USRP-users wrote:
Hi, folks.
In application note from Ettus, "Synchronization and MIMO Capability
with USRP Devices",
They said that "Generally, these fractional-N synthesizers introduce a
random phase offset after each retune."
What does "random ph
Hi, folks.In application note from Ettus, "Synchronization and MIMO Capability
with USRP Devices",They said that "Generally, these fractional-N
synthesizers introduce a random phase offset after each retune."What does
"random phase offset" mean?Q1. Does it mean that if I send a signal,
Acos(fc*t
11 matches
Mail list logo