I have a block that outputs a message with a frequency. I would love to be
able to set the frequency adjustment in the RFNoC DDC, but I don't see a way to
do it it automagically.
I am guessing that there is no way to do it even though it can be set from a
variable slider easily. Is there an
On 09/26/2018 03:35 PM, Mega Samples via USRP-users wrote:
Hi USRP-users,
I am working on a project where I have an X300, and want to use the
DAC at a sample rate of 800 MS/s, which is what is advertised on the
X300 datasheet. However, it appears the maximum sample rate is set by
the FPGA
Hi USRP-users,
I am working on a project where I have an X300, and want to use the DAC at
a sample rate of 800 MS/s, which is what is advertised on the X300
datasheet. However, it appears the maximum sample rate is set by the FPGA
at 200 MHz (see "Clocking and Sample Rates" section at
On 09/26/2018 02:24 PM, Arun kumar Verma wrote:
Hi Marcus
well I am connecting external ref of 10MHz on Ref Input SMA connector
and once I connect this and set my clock source for external source
then we are getting spurios, these spurs are low but for AM,FM audio
demodulation even Hz suprs
Hi Marcus
well I am connecting external ref of 10MHz on Ref Input SMA connector and once
I connect this and set my clock source for external source then we are getting
spurios, these spurs are low but for AM,FM audio demodulation even Hz suprs can
create probelem and that is what we are
On 09/26/2018 12:28 PM, Chintan Patel via USRP-users wrote:
Thanks - two follow up questions:
1. Is RSSI exposed as a sensor for the B205mini?
2. Does the Python UHD API, allow reading this in python?
Thanks
Yes to both as far as I can tell.
On Fri, Sep 21, 2018 at 8:20 PM Julian Arnold
Thanks - two follow up questions:
1. Is RSSI exposed as a sensor for the B205mini?
2. Does the Python UHD API, allow reading this in python?
Thanks
On Fri, Sep 21, 2018 at 8:20 PM Julian Arnold
wrote:
> Hey,
>
> Since release 3.8.2 the RSSI is exposed as a frontend sensor.
> You should be
On 09/26/2018 02:42 AM, Arun kumar Verma via USRP-users wrote:
Hi
We are using B205i-mini and we found that when I am sleclecting
external Ref using set_clock_source("ëxternal"); I am getting
intermodulation components in Hz.
I think supply for the internal oscillator is still on and it is
Hi,
sure, find the cpp attached.
Thanks and best regards,
Daniel
On 26.09.2018 16:56, Brian Padalino wrote:
On Wed, Sep 26, 2018 at 10:36 AM Daniel Rauschen via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi all,
I have a question regarding a RFNoC loopback in plain UHD.
On Wed, Sep 26, 2018 at 10:36 AM Daniel Rauschen via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi all,
>
> I have a question regarding a RFNoC loopback in plain UHD.
>
> I am familiar with [1] and I have a working solution with gr-ettus and
> python. The problem is, I can not figure out
Hi all,
I have a question regarding a RFNoC loopback in plain UHD.
I am familiar with [1] and I have a working solution with gr-ettus and
python. The problem is, I can not figure out how to connect the blocks
in plain UHD. Does anyone have a working example in UHD for a RFNoC
loopback?
Hi folks,
I have a C/C++ code that transmits frames in a given time slots from 2x
X310. All 4 AFEs are used (2 on each X310). The duty cycle is relatively
low, 1 frame in each 10 ms. Frame duration is a few hundred
microseconds. The processing is not CPU intensive. The problem is that
all 4
Hi Marcus,
We have built the library from source. I will make sure to update the
library (and dependencies) and report back. Fingers crossed!
Kind regards,
Stefan
On 24/09/2018 22:38, Marcus Müller wrote:
Hi Stefan,
so I've talked to our main software sustainance hero, and we rather
Hi
We are using B205i-mini and we found that when I am sleclecting external Ref
using set_clock_source("ëxternal"); I am getting intermodulation components in
Hz.I think supply for the internal oscillator is still on and it is not
compeletly shutting down. Is there any options to switch off
14 matches
Mail list logo
