Yes so it’s very likely a compatibility issue.
Your GNURadio install would have installed uhd_fft and likely linked against a
different UHD version
Sent from my iPhone
> On Jul 16, 2019, at 4:30 PM, Saeid Hashemi wrote:
>
> Hi Marcus,
> I appreciate your reply,
>
> I did some digging, and
Hi Marcus,
I appreciate your reply,
I did some digging, and it seems I only have this instance of UHD
installed. How would I troubleshoot this?
Would the best solution be to simply reinstall?
My setup is that I installed Open Air Interface, and UHD has been installed
automatically by that.
The ot
Hello,
I am trying to use the schmidl_cox noc block but when I build an fpga image
for an x310 with uhd_image_builder I get a timing error. I have tried
building an fpga image with only one CE, the scmidl_cox noc block, and it
still gives me a timing error, so its not due to resource utilization,
On 07/16/2019 09:39 AM, Knut Stolzenberg via USRP-users wrote:
Hey everyone,
I experience some randomness in the timing of the ouput of my SDR,
when applying a TTL signal to the GPIO. The TTL signal is fed to Pin 2
of the GPIO and has a Voltage of ~3V. It also is of arbitrary length
(~10 mic
Hey everyone,
I experience some randomness in the timing of the ouput of my SDR, when
applying a TTL signal to the GPIO. The TTL signal is fed to Pin 2 of the
GPIO and has a Voltage of ~3V. It also is of arbitrary length (~10
microseconds - several seconds). When the trigger is active it takes
Hi,
I understand that there is a limitation on the Ethernet that it doesn't support
more than 1 gig. But is there any limitation from the product side when it is
in network mode as compared to 2955? Further There are two TRx and two Rx
ports so can TRx be also used as receiver and if yes then
Koyel,
It "supports" it, but that is a bit of a misnomer. Unless you are using the
aforementioned network mode (which has its own speed limitations due to it not
being designed for anything more than testing), the Ethernet goes through the
ARM first, so the speeds are no where near the possibi
Does it support 1gig Ethernet? That is will the data rate be 1 gig?
Regards,
Koyel Das
Senior – Product Engineer
Vehere | Proactive Communications Intelligence & Cyber Defence
M: +919051132173 | T: +91 33 40545454 | F: +91 33 40545455 | W: www.vehere.com
Vehere is the proud recipient of the Fa
