Fixed the issue!
I had a small syntax error in my uhd.conf file (typo) and it didn't throw a
parsing error. Fixed that and it came up as expected. Basically the IP
address of the 10GigE wasn't properly set, so it failed.
Thank you,
Colby
On Thu, Jul 16, 2020 at 9:26 PM Marcus D. Leech via
On 07/16/2020 05:41 PM, Colby Boyer via USRP-users wrote:
Hi All,
I followed the flow listed here
https://kb.ettus.com/Getting_Started_with_DPDK_and_UHD with UHD 3.15
and DPDK 17.11, but I am unable to run uhd_usrp_probe, it fails. At
the end of the email the result of uhd_usrp_probe is
Hi All,
I followed the flow listed here
https://kb.ettus.com/Getting_Started_with_DPDK_and_UHD with UHD 3.15 and
DPDK 17.11, but I am unable to run uhd_usrp_probe, it fails. At the end of
the email the result of uhd_usrp_probe is attached.
Running Ubuntu 18.04. Installed UHD from source and
They in fact *must* be the same version for interoperability.
Sent from my iPhone
> On Jul 16, 2020, at 10:59 AM, Pavlos Basaras wrote:
>
>
> Hello again,
>
> i updated the version of the host's uhd to UHD_3.15.0.HEAD-0-gaea0e2de and
> re-executed "sudo uhd_images_downloader -t mender -t
Hello again,
i updated the version of the host's uhd to UHD_3.15.0.HEAD-0-gaea0e2de and
re-executed "sudo uhd_images_downloader -t mender -t n3xx --yes" .
It solved the problem.
One more thing is that after the update on the SD card file system, the uhd
version of the usrp also got
Thanks Neel for the clarification!
Regards
Snehasish
From: Neel Pandeya
Sent: Thursday, July 16, 2020 3:51 PM
To: Snehasish Kar
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] support for synchronizing two USRPs
You cannot synchronize USRP devices by
You cannot synchronize USRP devices by using a daisy-chain configuration.
The 10 MHz reference and the 1 PPS on both USRP devices must be connected
to a common 10 MHz reference and to a common 1 PPS signal. The OctoClock-G
device can be used to generate these signals and to distribute them to 8
Hello
I am trying to time synchronize two USRPs. I have connected reference and PPS
trigger out of USRP A to reference and PPS trigger in of USRP B. In USRP A i
have set time and clock source to GPSDO and in USRP B I have set time and clock
source to external. But I when I try to compare