Ben,
u-boot and kernel builds are part of the filesystem build. You'll want to
build upon our version of the kernel anyway (i.e. include our patches). The
fsbl is exported from Vivado, if you want to change that it's a bit more
effort. I suggest getting familiar with the OE build first. Phil's lin
A quick reminder that
uhd_images_downloader -t e320 -t sdk
will download the corresponding SDK for your UHD version even when the link
Michael provided is no longer accurate.
M
On Mon, 12 Oct 2020, 17:48 Michael Dickens via USRP-users, <
usrp-users@lists.ettus.com> wrote:
> Hi Mark - You need
On 10/14/20 6:00 AM, Martin Braun via USRP-users wrote:
> A quick reminder that
>
> uhd_images_downloader -t e320 -t sdk
>
> will download the corresponding SDK for your UHD version even when the link
> Michael provided is no longer accurate.
Installing uhd on a machine just to figure out a down
I have an N320 that I'm trying out for the first time. I'm using UHD
4.0.0, and I loaded the corresponding root filesystem data for that
release to the N320. I find that when the receiver is tuned to
frequencies below 450 MHz, the spectrum is inverted. When you tune to
450 MHz or above, the spe
Philip,
All the files are located in that same location Michael mentioned, sorted
by product and named by release. So this should never go stale.
https://files.ettus.com/binaries/cache/
If you're ever unsure which one is the right one for your version, you can
check the manifest file, which is w
On 10/14/2020 01:28 PM, Jason Roehm via USRP-users wrote:
I have an N320 that I'm trying out for the first time. I'm using UHD
4.0.0, and I loaded the corresponding root filesystem data for that
release to the N320. I find that when the receiver is tuned to
frequencies below 450 MHz, the spectr
Hi,
I am using the Replay block and I ran into an issue where I have gotten the
Replay block into a bad state which I can't seem to fix short of rebooting
the N310. The way I know it is in a bad state is that the data playing out
is corrupted. Although the playout is similar to what it should be,
Mark,
While I don't have recommendations for specific test instrumentation, I'd
guess you could pretty easily characterize a RX gain vs frequency with a
(calibrated) signal generator that is addressable over SCPI. Once you've
figured out how to TX a CW at a given power level over the SCPI interfac
