Hello,
I'm trying to transmit complex samples (e.g. BPSK chips) using B210 and
GNUradio. My flowgraph is very simple: A file source connected to a USRP
sink (cpu format fc64), sample rate is 1e6. However the USRP seems not to
transmit anything (no red light, and nothing on the spectrum) and also
t
Dear all,
After following [1] (testing OOT gain block from example code),
uhd_usrp_probe outputs:
[...]
[WARNING] [RFNOC::BLOCK_FACTORY] Could not find block with Noc-ID 0xb16, 0x
[...]
| | * 0/Block#0
| | * 0/DDC#0
[...]
and in C++:
auto gain_blocks =
graph->find_blocks("");
is em
As long as it had power it will run fine without the battery as far as I know.
Sent from my iPhone
> On Jan 14, 2021, at 12:20 PM, David Scott via USRP-users
> wrote:
>
>
> Hi all,
>
>
>
> I need to carry out some development and testing with the USRP E312 for work
> in the lab. However
Hi all,
I need to carry out some development and testing with the USRP E312 for work in
the lab. However, due to the lockdown in the UK I am not able to physically get
to the device except for some initial setting up (network etc.).
I know that the device should not be plugged in for more tha
See also
https://files.ettus.com/manual/page_configuration.html#config_stream_args_args
You might also refer to the benchmark_rate example, which takes arguments
to set the SPP for RX and TX separately.
Wade
On Wed, Jan 13, 2021 at 11:21 AM Marcus D Leech via USRP-users <
usrp-users@lists.ettus.