I am assuming you also sourced setupenv.sh in the n3xx directory?
If you remove the n3xx/build-ip/xc7z100ffg900-2/hb47_1to2 directory and try
again, does it still fail?
Brian
On Thu, Jan 12, 2023 at 6:35 PM wrote:
> Hello,
>
>
> I am trying to create a Vivado environment for the ettus 321,
Hello,
I am trying to create a Vivado environment for the ettus 321, however, I am
running into issues.
I navigated to uhd/fpga/usrp3/top/n3xx where there is a makefile which I assume
creates the environment in Vivado. I run the makefile, but I end up with the
error. It was successfully
I am building some experimental/development FPGAs for an X410 and I am
looking at loading them temporarily for a quick runtime test without
committing to overwriting default images.
With the X310 I am able to achieve this with a JTAG connection. With the
X410, being an SoC, I think this would be
On 12/01/2023 13:52, mgarr...@garrett-tech.com wrote:
We would like to move our e310’s to UHD4.0, GNU Radio 3.10 (with
gr_rfnoc) (moving from 3.15.0 LTS, GNURADIO 3.7). We are having issues
creating an Ubuntu VM development environment.
We have the images for UHD4.1.0.4 , GNU Radio 3.8:
We would like to move our e310’s to UHD4.0, GNU Radio 3.10 (with gr_rfnoc)
(moving from 3.15.0 LTS, GNURADIO 3.7). We are having issues creating an Ubuntu
VM development environment.
We have the images for UHD4.1.0.4 , GNU Radio 3.8:
e3xx_e310_sg3_\*_default-v4.1.0.4.zip (\* = mender, sdimg,
Hi Piotr,
One method that may be useful to you for debugging is to create an RFNoC
graph with just one block, the FFT (no radio or DDC) and then configure a
Tx streamer and Rx streamer from the host to send and receive data from
this single block.
Rob
On Wed, Jan 11, 2023 at 10:17 PM wrote:
>
