AD9361 on the X310.
>
> Sent from my iPhone
>
> > On Feb 25, 2019, at 10:02 AM, Alexander Olihovik via USRP-users <
> usrp-users@lists.ettus.com> wrote:
> >
> > Hi all,
> >
> > I modified the X310's FPGA to toggle a GPIO pin immediately once it
Hi all,
I modified the X310's FPGA to toggle a GPIO pin immediately once it sees TX
data, and delay the TX data by a fixed number of samples. Using an
oscilloscope, I found that everything works as expected, but there is an
initial spike of RF power that precedes the GPIO trigger and the RF signal
t your UHD source does not have
> any changes, especially ddc.xml and duc.xml. You should also uninstall UHD
> and do a new build: (from the build dir) 'make uninstall; make clean; make
> install'.
>
> Jonathon
>
> On Wed, Feb 6, 2019 at 6:46 AM Alexander Olihovik vi
Hi all,
I'm getting the following LookupError after making/installing
UHD_003.010.003 and building/writing the bitstream for the X310_HG project:
-
linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.HEAD-0-gef157678
-- X300 initialization sequence...
-- De
Hi all,
I'm trying to work with IQ data on the X310 right as it leaves the FPGA to
be transmitted, and also as soon as it is received from the daughtercard.
Is "capture_ddrlvds.v" and "gen_ddrlvds.v" the right place to do this?
Best,
Alex
___
USRP-users
Nick Foster wrote:
> You can do "make GUI=1 X310_HG" to open the Vivado GUI and build the
> project.
>
> Nick
>
> On Tue, Dec 18, 2018 at 1:33 PM Alexander Olihovik via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> Hi all,
>>
>> W
Hi all,
Will running "make X310_HG" generate a .xpr file that I can open with
Vivado? I have a .xpr for the E310 from a previous effort so I think it can
be done, but I wasn't the originator of this file.
I was following this guide:
http://files.ettus.com/manual/md_usrp3_build_instructions.html
B
gt; http://www.opensdr.com/posts/using-docker-for-openembedded-builds/
>>> >
>>> > Basically, he uses a docker container to have a controlled version of
>>> > his OS, and does the build within. Only thing missing (from top of my
>>> > head) is that
.@virginia.edu"
> >
> > so that `repo init` can get right to work.
>
> Added to my todo list. I just did these by hand to make it work.
>
> Philip
>
> >
> > Best regards,
> >
> > Marcus
> >
> >
> > On 26.07.2017 17:11, Alexan
I've been following the guide for rebuilding the file system at
https://files.ettus.com/manual/page_usrp_e3x0.html.
When I try to build an image with 'bitbake gnuradio-dev-image', I get the
following error:
ERROR: Function failed: do_compile (log file is located at
/home/user/Projects/E310/e300-oe-
I've been following the guide for rebuilding the file system at
https://files.ettus.com/manual/page_usrp_e3x0.html.
When I try to build an image with 'bitbake gnuradio-dev-image', I get the
following error:
ERROR: Function failed: do_compile (log file is located at
/home/user/Projects/E310/e300-oe-
11 matches
Mail list logo