)
Subject: Re: [USRP-users] Problem in installation of NI Linux device driver in
ubuntu 20.04.
Hello,
I have used this driver with a X310 in Ubuntu 18.04. I think there is a limit
to the kernel version supported by the driver.
Regards,
Wheberth
On Wed, Mar 10, 2021, 07:17 Sourin Mondal (Ve
Hello everyone,
I am trying to install NI Linux device driver and I followed the steps
mentioned in the link "https://files.ettus.com/manual/page_ni_rio_kernel.html";
but I am facing an error. Can anyone help me the proper procedure of how to
install NI Linux device driver in ubuntu 20.04.
Plea
Hi,
I am trying to install NI Linux device driver and I followed the steps
mentioned in the link "https://files.ettus.com/manual/page_ni_rio_kernel.html";
but I am facing an error.
Please provide me the proper steps how to install NI Linux device driver in
ubuntu 20.04.
Please find the attachmen
Hi,
2 days back I have used a C++ code which can acquire data from Antenna via USRP
2955. Previously that code works fine in another machine. But when I tried to
run in another machine, it was showing "no device found" when I run the command
"uhd_find_devices". Even when i run the command "uhd_u
attaching the README file again.
Please find the attachment.
From,
Sourin
From: USRP-users on behalf of Sourin
Mondal (Vehere) via USRP-users
Sent: Friday, August 7, 2020 10:28 AM
To: Neel Pandeya
Cc: USRP-users@lists.ettus.com
Subject: Re: [USRP-users] USRP not
Sourin:
Could you share your C++ program, so that we might try to reproduce the problem
here?
Which version of Linux / Ubuntu are you running?
--Neel Pandeya
On Thu, 6 Aug 2020 at 11:51, Sourin Mondal (Vehere) via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi,
I am using UHD-3.14.
, Sourin Mondal (Vehere) via USRP-users
wrote:
Hi,
I am using USRP 2955 and want to receive two channels at 100 MSPS each
simultaneously. I have connected usrp with PCIe. I am running my code but only
one channel is getting received. Other channel is sending zeros only. I am
using Ubuntu 18.04
Hi,
I am using USRP 2955 and want to receive two channels at 100 MSPS each
simultaneously. I have connected usrp with PCIe. I am running my code but only
one channel is getting received. Other channel is sending zeros only. I am
using Ubuntu 18.04. Previously one year back I faced the same prob
Hi Marcus,
I think my previous email is not sent properly so sending again. Thanks for the
information you provided. This 5 degrees is for what frequency? Are you sure
its 5 degrees or less? What is the precision?
Regards,
Sourin
From: Marcus D. Leech
Sent: Mon
From: Marcus D. Leech
Sent: Monday, January 27, 2020 11:54 AM
To: Sourin Mondal (Vehere)
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] phase-aligning two USRPs without Octoclock
On 01/27/2020 01:00 AM, Sourin Mondal (Vehere) wrote:
Hi Marcus,
Thanks
Hi Marcus,
Thanks for the information. Could you please also tell what is the accuracy
with which the phases are aligned between USRP channels, when we use 10 MHz
reference to align, in pico-seconds or nano-seconds?
Regards,
Sourin
From: Marcus D. Leech
Sent: T
Following link (fig. 2) shows the cris-cross connections inside USRP to
synchronize (phase align) 4 channels of the USRP.
https://kb.ettus.com/Direction_Finding_with_the_USRP%E2%84%A2_X-Series_and_TwinRX%E2%84%A2
If I want to synchronize (phase align) all channels of two USRPs, is there any
sol
12 matches
Mail list logo
