rs@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] Phase synchronization after hopping
See the tuning notes in the UHD manual. I'm assuming you're not explicitly
setting
POLICY_MANUAL without reason!
Best regards,
Marcus
On 06.03.21 18:43, Snehasish Ka
6> for Windows 10
>
>
>
> *From: *Marcus Müller via USRP-users <mailto:usrp-users@lists.ettus.com>
> *Sent: *06 March 2021 23:00
> *To: *usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>
> *Subject: *Re: [USRP-users] Phase synchronization after hop
tps://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Marcus Müller via USRP-users<mailto:usrp-users@lists.ettus.com>
Sent: 06 March 2021 23:00
To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] Phase synchronization after hopping
Hi Sneh
Hi Snehasish,
you're not actually using timed commands, so there's no exact timing involved.
Your usleep
doesn't make much sense either, you shouldn't let your PC sleep while the
analog chain
tune, but instead already issue the next timed command. In this situation, I
also would
*not* tune the
On 03/06/2021 11:31 AM, Snehasish Kar via USRP-users wrote:
Hello everyone
I am trying to achieve frequency hopping in GSM using twinrx with usrp
x310. Here I am using timed command for tuning a single port across a
given frequency list. During hopping it stays in each frequency for
4msecs a
Hello everyone
I am trying to achieve frequency hopping in GSM using twinrx with usrp x310.
Here I am using timed command for tuning a single port across a given frequency
list. During hopping it stays in each frequency for 4msecs and till the time
frequency hopping continues, I am able to iden
