To: Eugene Grayver
Cc: Robert McGwier ; Brian Padalino ;
usrp-users
Subject: Re: [USRP-users] Re: Wideband IQ Daughterboard
Hi Eugene,
I don't know why the basic Rx has a lower frequency listed. It seems
inconsistent with other notes such as the following found
here<https://kb.ettus.
26, 2023 7:50 PM
*To:* Brian Padalino
*Cc:* Eugene Grayver ; usrp-users
*Subject:* Re: [USRP-users] Re: Wideband IQ Daughterboard
Can the existing firmware support that bandwidth? The 10Gbps
Ethernet can but I am not sure about the rest of the USRP. I own
two of them and have n
---
> *From:* Robert McGwier
> *Sent:* Sunday, March 26, 2023 7:50 PM
> *To:* Brian Padalino
> *Cc:* Eugene Grayver ; usrp-users <
> usrp-users@lists.ettus.com>
> *Subject:* Re: [USRP-users] Re: Wideband IQ Daughterboard
>
> Can the existing firmware support
: Sunday, March 26, 2023 7:50 PM
To: Brian Padalino
Cc: Eugene Grayver ; usrp-users
Subject: Re: [USRP-users] Re: Wideband IQ Daughterboard
Can the existing firmware support that bandwidth? The 10Gbps Ethernet can but
I am not sure about the rest of the USRP. I own two of them and have never
On 26/03/2023 22:50, Robert McGwier wrote:
Can the existing firmware support that bandwidth? The 10Gbps Ethernet
can but I am not sure about the rest of the USRP. I own two of them
and have never tried to do that.
Bob
You can (theoretically) stream 200Msps from an X310 over 10GiGe. Getting
Can the existing firmware support that bandwidth? The 10Gbps Ethernet can
but I am not sure about the rest of the USRP. I own two of them and have
never tried to do that.
Bob
On Wed, Mar 22, 2023 at 9:58 AM Brian Padalino wrote:
> You're right - I completely missed that part of the email.
>
You're right - I completely missed that part of the email.
My apologies.
Brian
On Tue, Mar 21, 2023 at 7:12 PM Eugene Grayver
wrote:
> Yes, as stated in the original post 'Basic-RX with a minimum of 1 MHz'.
> The DC is cutoff by the balun on the basicRX making it unsuitable for IQ.
>
>
Yes, as stated in the original post 'Basic-RX with a minimum of 1 MHz'. The DC
is cutoff by the balun on the basicRX making it unsuitable for IQ.
Eugene Grayver, Ph.D.
Aerospace Corp., Principal Engineer
Tel: 310.336.1274
On Tue, Mar 21, 2023 at 6:12 PM Eugene Grayver
wrote:
> Hello,
>
> I want to use an external IQ mixer with an external LO. My signal is 160
> MHz wide, which fits nicely into the nominal complex 200 MHz Nyquist of the
> X310. Unfortunately the only daughterboards for direct access to the ADCs