s 2XLO, so you'd need to put
3600MHz into that port and select external LO.
*From: *"Marcus D. Leech"
*Date: *Wednesday, July 18, 2018 at 11:14 AM
*To: *Leonid Veytser ,
"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Setting N310 TX and RX bandwidth
On 0
synchronizing channel phase but no luck.
Lenny
From: "Marcus D. Leech"
Date: Wednesday, July 18, 2018 at 11:14 AM
To: Leonid Veytser , "usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/18/2018 09:57 AM, Veytser, Leonid - 0665
0" --rx-channels "0" --tx-subdev A:0 --rx-subdev B:0 --wave-type SINE
--wave-freq 1e3
*From: *"Marcus D. Leech"
*Date: *Tuesday, July 17, 2018 at 8:54 PM
*To: *Leonid Veytser ,
"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Setting N310 TX and
8:54 PM
To: Leonid Veytser , "usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/17/2018 02:13 PM, Veytser, Leonid - 0665 - MITLL wrote:
I tried various gain settings, including both 0 and 30 for TX and 0 and 30 for
RX.
I also tried se
produces to see if the signal is
there or not?
How are you doing the loopback?
*From: *"Marcus D. Leech"
*Date: *Tuesday, July 17, 2018 at 1:02 PM
*To: *Leonid Veytser ,
"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/17/20
quot;usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/17/2018 12:22 PM, Veytser, Leonid - 0665 - MITLL wrote:
I tried both of your suggestions – increasing RX gain and offsetting RX
frequency. However, neither seem to be working.
Lenny
What gain s
e and clock sources?
*From: *"Marcus D. Leech"
*Date: *Monday, July 16, 2018 at 10:08 PM
*To: *Leonid Veytser ,
"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/16/2018 06:53 PM, Veytser, Leonid - 0665 - MITLL wrote:
H
DC-offset removal for a carrier that is right on top of
the "DC" region.
From: USRP-users on behalf of "Marcus D.
Leech via USRP-users"
Reply-To: "Marcus D. Leech"
Date: Monday, July 16, 2018 at 3:20 PM
To: "usrp-users@lists.ettus.com"
Subject: Re:
on top of
the "DC" region.
*From: *USRP-users on behalf of
"Marcus D. Leech via USRP-users"
*Reply-To: *"Marcus D. Leech"
*Date: *Monday, July 16, 2018 at 3:20 PM
*To: *"usrp-users@lists.ettus.com"
*Subject: *Re: [USRP-users] Setting N310 TX and RX ba
Lenny
From: USRP-users on behalf of "Marcus D.
Leech via USRP-users"
Reply-To: "Marcus D. Leech"
Date: Monday, July 16, 2018 at 3:20 PM
To: "usrp-users@lists.ettus.com"
Subject: Re: [USRP-users] Setting N310 TX and RX bandwidth
On 07/16/2018 02:46 PM, Ve
On 07/16/2018 02:46 PM, Veytser, Leonid - 0665 - MITLL via USRP-users wrote:
I am unable to set either RX or TX bandwidth on N310. When attempting
to set, I get the following warning:
Setting TX Bandwidth: 40.00 MHz...
*[WARNING] [0/Radio_0] *set_tx_bandwidth take no effect on AD9371.
D
I am unable to set either RX or TX bandwidth on N310. When attempting to set, I
get the following warning:
Setting TX Bandwidth: 40.00 MHz...
[WARNING] [0/Radio_0] set_tx_bandwidth take no effect on AD9371. Default analog
bandwidth is 100MHz
Actual TX Bandwidth: 0.00 MHz...
and
Set
12 matches
Mail list logo