block, since I have still for two weeks the test version of
Vivado.
Thomas
From: Rob Kossler
Sent: Wednesday, December 11, 2019 4:50 PM
To: Thomas Harder; Nate Temple
Subject: Re: [USRP-users] transmitting on two channels with replay block
Thomas,
I believe that Nate and I were saying basica
would be
>> sufficient.
>>
>> I was already searching what exactly this SRAM image means. Because today
>> I was able to setup DPDK with UHD 3.14.1 and the benchmark_rate
>> code(excactly described as in the mail of Nate) was still full of underruns
>> with the st
;> change (because I have no experience in this field and I have not the time
>>> to invest into it), I must search for another solution to create two
>>> different synchronized RF waveforms with 160MHz bandwidth (optical,
>>> electronical,…) because this will be just
t a part of my experimental setup
>> but it is crucial to go on .
>>
>> I am thankful for any advise,
>>
>> Thomas
>>
>>
>>
>>
>>
>> *From: *Rob Kossler
>> *Sent: *Tuesday, December 10, 2019 5:01 AM
>> *To: *Thomas Harder
&
of my experimental setup
> but it is crucial to go on .
>
> I am thankful for any advise,
>
> Thomas
>
>
>
>
>
> *From: *Rob Kossler
> *Sent: *Tuesday, December 10, 2019 5:01 AM
> *To: *Thomas Harder
> *Cc: *Sam Reiter ; usrp-users@lists.ettus.com
> *Subject:
e: [USRP-users] transmitting on two channels with replay block
Thomas,
Upon further investigation, we may be running up to a practical limit of a
single CHDR interface rather than an issue with your code. A single replay
block servicing two radios will have a max (theoretical) rate of 187.5
you,
>
> Thomas
>
>
>
>
>
> *From: *Sam Reiter
> *Sent: *Friday, December 6, 2019 10:23 PM
> *To: *Thomas Harder
> *Cc: *usrp-users@lists.ettus.com
> *Subject: *Re: [USRP-users] transmitting on two channels with replay block
>
>
>
> Thomas,
>
>
srp-users@lists.ettus.com
Subject: Re: [USRP-users] transmitting on two channels with replay block
Thomas,
Upon further investigation, we may be running up to a practical limit of a
single CHDR interface rather than an issue with your code. A single replay
block servicing two radios will have a
Thomas,
Upon further investigation, we may be running up to a practical limit of a
single CHDR interface rather than an issue with your code. A single replay
block servicing two radios will have a max (theoretical) rate of 187.5 MSPS
on either channel. This means that you might be able to squeeze
Thomas,
I'd need to set it up on my end, but I believe you can TX two distinct
waveforms from a single replay block instance. You'd need to make sure that
your adding your data to the buffer in separate locations and at an address
that is a multiple of 8 bytes (which it looks like you're doing fro
Hello everyone,
Is it possible to transmit two different waveforms on the two channels of the
USRP X310 with the two UBX-160 daughterboards?
I want to transmit two different waveforms simultaneous (synchronized ) on the
two channels of the USRP with the full sample rate of 200 MS/s. I tried alrea
11 matches
Mail list logo