Hi Dario,
Are you saying you patched UHD to wait for AKS? Would you be able to provide a
patch for this?
Thanks
Will
From: Dario Pennisi
Sent: Friday, July 13, 2018 1:49 AM
To: Brophy, William ; Keith k
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] x300 unrecoverable timeouts
Hi
Hi,
We recently investigated a similar issue and have a clear understanding on what
this comes from.
Commands sent by PC to usrp device are responded with an acknowledge. Each
command has a sequence number and is sent asynchronously. On the receiving side
there is a check on acknowledge sequence
Hello Will
This sounds eerily similar to issues I've had using N200s. I basically
found that working at high rates, using either
STREAM_MODE_NUM_SAMPS_AND_DONE or using starts and stops was completely
unusable. The system would go into an unrecoverable set of timeouts or
overflows. I had to switch
While working to get coherent streams working, I ran into an issue using an
x310 with two TwinRX daughterboards.
The issue starts with a series of "ERROR_CODE_OVERFLOW (Out of sequence error)"
errors. In an attempt to recover from that, the rx streamer is thrown out and
recreated. The next strea
