> Since the authentication failure doesn't trigger the syslog message, QPOP
> isn't calling vchkpw.
ahaaa...
> > > Why aren't you using qmail-pop3d?
> >
> > Wasn't aware that I should be.
>
> You should :-) Perhaps the README should be clearer about this. Disable
QPOP
> and run qmail-pop3d, here'
> > Is QPOP calling /usr/local/vpopmail/bin/vchkpw?
>
> I don't know. How do I find out?
>
> > What does syslog say?
>
> /var/log/messages reports one instance of vchkpw: vchkpw: Read error
> but it does not occur when I attempt the telnet session below. I
> am not sure
> what caused it.
Since the
- Original Message -
From: "Chris Bolt" <[EMAIL PROTECTED]>
To: "GIC MLs" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, May 08, 2001 2:29 PM
Subject: RE: POP Authentication Not Working
> Is QPOP calling /usr/local/vpopmail/bin/vchkpw?
I don't know. How do I find out?
> What d
Is QPOP calling /usr/local/vpopmail/bin/vchkpw? What does syslog say? Why
aren't you using qmail-pop3d? Why is your gid so high? Did you create the
vchkpw group?
> Hi All,
>
> After finally getting vpopmail to install, I am not able to log
> in as a new
> vpop user.
>
> Environment: FreeBSD 4.2, q
Hi All,
After finally getting vpopmail to install, I am not able to log in as a new
vpop user.
Environment: FreeBSD 4.2, qmail-1.03
Config line:
# ./configure --enable-default-domain=mydom.or.jp --enable-roaming-users=y
Output:
Current settings
--
I have had vpopmail/qmail set up fine for a few days now.
I am using --with-mysql for password authentication.
I am consistently getting this type of error:
file permission error
/home/vpopmail/domains/mydomain/myuser/Maildir/989292357.qw
All files are owned by vpopmail.vchkpw.
I can't get back
At 07:46 PM 5/7/2001 -0500, you wrote:
>Were there any errors in the qmail log file?
>Perhaps running out of file descriptors or some such?
>Is your queue broken? Did you run out of inodes?
>
>Have you tried sending out a small text message?
>Does it give the same results?
>
>Ken Jones
No errors
That is what it looks like.. I am actually troubleshooting a customer
issue... qmailadmin is showing email addresses that are not actually in
the domain's vpopmail directory but I am not getting a bounce message,
only a core dump I can't say for sure but, if I send a message to an
address that
on 5/7/01 9:04 PM, Shawn Duffy at [EMAIL PROTECTED] wrote:
> I am seeing a lot of these errors in /var/log/messages:
>
> May 7 21:44:53 W11-6 /kernel: pid 5426 (vdelivermail), uid 98: exited on
> signal 11 (core dumped)
> May 7 21:46:43 W11-6 /kernel: pid 5452 (vdelivermail), uid 98: exited on
I am seeing a lot of these errors in /var/log/messages:
May 7 21:44:53 W11-6 /kernel: pid 5426 (vdelivermail), uid 98: exited on
signal 11 (core dumped)
May 7 21:46:43 W11-6 /kernel: pid 5452 (vdelivermail), uid 98: exited on
signal 11 (core dumped)
May 7 21:51:49 W11-6 /kernel: pid 5496 (vdel
Were there any errors in the qmail log file?
Perhaps running out of file descriptors or some such?
Is your queue broken? Did you run out of inodes?
Have you tried sending out a small text message?
Does it give the same results?
Ken Jones
Kris von Mach wrote:
>
> Hi,
>
> I know this might be
Looks pretty good. I would send the output of tcpserver into
multilog, not splogger/syslog.
Ken Jones
John Stile wrote:
>
> Do I have all the steps here?
> I am mainly worried about the syntax of steps 4 and 5 (startup scripts
> syntax).
>
> # 1. Install tcpserver #
>
Sorry for my ignorance, but I would put a file (attachment) of that size
on FTP.
As far as I know FTP transfers the file in binary form which means that
you stay away from the stricky encoding/decoding stuff.
Also, it's up to the receiver to decided whether or not they want the
file...
I do not
Hi,
I know this might be a bit off-topic, and I apologize, but I don't know
where else to turn to.
I have a small mailing list, 260 members. I have sent out one email to the
list with a attachment of 638kb. I have plenty of bandwidth, I also have
768MB Ram on the system, my qmail concurrencyremo
hello,
i'm totally newbie to make scripts of any kind
:))
so, i'm wondering if there's some existing
scripts
to create vdoamins and user with passwords from a
text file for vpopmail ...
thx 4 help.
Do I have all the steps here?
I am mainly worried about the syntax of steps 4 and 5 (startup scripts
syntax).
# 1. Install tcpserver #
gunzip ucspi-tcp-0.88.tar
tar -xf ucspi-tcp-0.88.tar
cd ucspi-tcp-0.88
make
su
make setup check
##
#
* John Stile <[EMAIL PROTECTED]> [010508 00:43]:
> 1. When tcpserver is setup, do I remove the hosts.allow RELAYCLIENT
> line, or is it ignored?
It is ignored
> 2. Does the /var/qmail/users/cdb have anything to do with the
> /home/vpopmail/etc/tcp.smtp.cdb?
No
> 3. Once pop and smtp are handle
1. When tcpserver is setup, do I remove the hosts.allow RELAYCLIENT
line, or is it ignored?
2. Does the /var/qmail/users/cdb have anything to do with the
/home/vpopmail/etc/tcp.smtp.cdb?
3. Once pop and smtp are handled by tcpserver, how do I control access
to Courier-IMAP?
* [EMAIL PROTECTED] [010504 11:45]:
> Thank you all.
> i just run the following command
> echo "40" > /var/qmail/control/concurrencyremote
> but the qmail-mrtg still no change. should i restart the qmail or is there
> anyway to increase it without restart mail server?
Yes, you need to restart qma
Thank you all.
i just run the following command
echo "40" > /var/qmail/control/concurrencyremote
but the qmail-mrtg still no change. should i restart the qmail or is there
anyway to increase it without restart mail server?
Chris Chan
- Original Message -
From: "Jason Brooke
Bill Shupp wrote:
>
> on 5/7/01 3:44 PM, Ken Jones at [EMAIL PROTECTED] wrote:
>
> > I just posted the new development version.
> > The new features being added are:
> >
> > - optionally storing clear text passwords in the cdb and mysql modules
> >
> > - storing alias/forwards in a mysql table
>
on 5/7/01 3:44 PM, Ken Jones at [EMAIL PROTECTED] wrote:
> I just posted the new development version.
> The new features being added are:
>
> - optionally storing clear text passwords in the cdb and mysql modules
>
> - storing alias/forwards in a mysql table
>
> - new api's for maintaining ali
This is a quick hack, I tested it on a small list on my Linux box:
#!/bin/sh
cat $1 | ( \
IFS=: ; while read username pw; \
do /home/vpopmail/bin/vadduser $username $pw; done \
)
The text file is like this:
[EMAIL PROTECTED]:pass1
[EMAIL PROTECTED]:pass2
[EM
I just posted the new development version.
The new features being added are:
- optionally storing clear text passwords in the cdb and mysql modules
- storing alias/forwards in a mysql table
- new api's for maintaining alias/forwards. For the mysql module
it will maintain the information in a
On Fri, 4 May 2001 [EMAIL PROTECTED] wrote:
>
> my qmail-mrtg show that the qmail concurrency value 20 is not enough. anyone
> can tell me how to increase it.
>
http://cr.yp.to/qmail/faq/efficiency.html#concurrency
-tcl.
Several people already answered this question on the Qmail list.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, May 03, 2001 9:28 PM
Subject: How to increase the qmail "concurrency"?
>
> my qmail-mrtg show that the qmail co
"Chris Bolt" <[EMAIL PROTECTED]> writes:
> http://members.elysium.pl/brush/qmail-smtpd-auth/ might be what you're
> looking for. Just replace /bin/checkpassword with /home/vpopmail/bin/vchkpw
> and it should work with vpopmail.
You have to set +s to vchkpw 'cause qmail-smtpd is running under qma
my qmail-mrtg show that the qmail concurrency value 20 is not enough. anyone
can tell me how to increase it.
Thanks in advance
Chris
concurrency-day.png
> my qmail-mrtg show that the qmail concurrency value 20 is not enough. anyone
> can tell me how to increase it.
>
> Thanks in advance
>
>
>
> Chris
Hi Chris
Please read 'FAQ' in your source directory, or have a look at
http://www.lifewithqmail.org/lwq.html which is linked from www.qmail
> hi jason why not just say /var/qmail/control/concurrencyremote
>
> add it there...have a good day.
Because I'd prefer to politely teach people to learn to help themselves if they
can
jason
http://members.elysium.pl/brush/qmail-smtpd-auth/ might be what you're
looking for. Just replace /bin/checkpassword with /home/vpopmail/bin/vchkpw
and it should work with vpopmail.
> Hello All, I've been lurking on this list a while (trying to learn about
> the server I run), and I have a problem
I had the same results as Rick. It took me a bit to get it setup since I
didn't read the setup completely. Users that use POP in Outlook Express
have no problems since OE checks POP before sending. Regular Outlook
intermittently tried to send before POP but if you send/recv a second time
it wor
I tried copying my Maildirs to a different partition and mounting that
partition as the original. After that' mail could not be delivered. It
seemed that the actual inodes were being referenced. I would make a few
test runs.
I was able to recently takeover a domain name for a friend. I setup
Good Morning Roman:
Your acl file should have the following line:
GROUPNAMEPERMISSIONSUSERNAME
All the other lines must be commented.
The GROUPNAME must be any name you want.
The PERMISSIONS must be all the permissions you want the USERNAME to have
such as VCPX.
And the USERNAME mu
From: "David Crawshaw" <[EMAIL PROTECTED]>
> I need some way of letting users from dynamic IP's across the internet
> use my SMTP server, but I just got used as an open relay. SMTP-after-POP
> won't work for me (windows users, they won't accept that),
My windows (Outlook/Outlook Express) users ac
Hello All, I've been lurking on this list a while (trying to learn about
the server I run), and I have a problem.
I need some way of letting users from dynamic IP's across the internet
use my SMTP server, but I just got used as an open relay. SMTP-after-POP
won't work for me (windows users, they
36 matches
Mail list logo
