Hy,
I want to use this patch, but i dont know how. Only this is necesary to move
the motor:
S5.0W 11700 V 9750 G v t
S5.0W 9 V 10600 G v T
S5.0W 11700 H 9750 G V t
S5.0W 9 H 10600 G V T
or should be like this:
S1.0W 11700 V 9750 G v t [e0 31 6e 01(this bite should be positon in
On Mon, 2009-06-08 at 21:54 +0200, Georg Acher wrote:
On Mon, Jun 08, 2009 at 09:40:04PM +0200, Mattia Rossi wrote:
The need for time in such a discovery process, at least on my part, is
fully understood, I only wish that sometimes the guys from Reel would
provide a little more
On Tuesday 09 of June 2009, lucian orasanu wrote:
Hy,
I want to use this patch, but i dont know how. Only this is necesary to
move the motor:
S5.0W 11700 V 9750 G v t
S5.0W 9 V 10600 G v T
S5.0W 11700 H 9750 G V t
S5.0W 9 H 10600 G V T
or should be like this:
S1.0W 11700 V
I did that, i took my position with an gps, putet ther in lnb config, and
afther that changing channels.conf form diferent satelites, but i did something
wrong because i did not manage to get signal, until i setup my antena manualy
again (form left right switches of motor).
My idea was to
The patch send this command only when satellite is changing.
is it possible to have a look in vdr logs on that disecs commands ?
You should also use it for motor behind diseqc switch. The next example is for
4-input diseqc
switch which has diseqc motor connected to input 4.
did LNB connect
On Tuesday 09 of June 2009, Goga777 wrote:
The patch send this command only when satellite is changing.
is it possible to have a look in vdr logs on that disecs commands ?
You should also use it for motor behind diseqc switch. The next example is
for 4-input diseqc switch which has diseqc
On Tuesday 09 of June 2009, lucian orasanu wrote:
I did that, i took my position with an gps, putet ther in lnb config, and
afther that changing channels.conf form diferent satelites, but i did
something wrong because i did not manage to get signal, until i setup my
antena manualy again (form
Hi
how can I fix my problem with ERROR: cOsd::SetAreas returned 5
Jun 9 21:25:26 arvdr vdr: [12294] VDR version 1.7.7 started
Jun 9 21:25:26 arvdr vdr: [12294] codeset is 'UTF-8' - known
Jun 9 21:25:26 arvdr vdr: [12294] found 23 locales in ./locale
Jun 9 21:25:26 arvdr vdr: [12294] loading
Hi,
Goga777 schrieb:
how can I fix my problem with ERROR: cOsd::SetAreas returned 5
This number matches the enum value oeWrongAlignment. In VDR's
code excerpt you can see the condition for this error:
if (Areas[i].x1 Areas[i].x2 || Areas[i].y1 Areas[i].y2 ||
Areas[i].x1 0 || Areas[i].y1
On Tue, Jun 09, 2009 at 11:44:29AM +0200, Mattia Rossi wrote:
Hi Georg,
sorry if that came out as 'they are hiding something', I was really
thinking more in terms of 'there are so many variables that the best
combination is probably achieved in an environment where the user has
much less
Hi,
check your setup.conf. Mine has invalid sizes:
FontFix = Courier:Bold
FontFixSize = 0
FontFixSizeP = 0,00
FontOsd = VDRSymbols Sans:Bold
FontOsdSize = 0
FontOsdSizeP = 0,00
FontSml = VDRSymbols Sans:Book
FontSmlSize = 0
FontSmlSizeP = 0,00
OSDHeight = 0
OSDHeightP = 0,00
11 matches
Mail list logo
