Приветствую, Timothy
> Is your bud motorized?
yes, I have the motor STRONG SRT DM 2100
http://faraday-systems.uaprom.net/p383218-motopodves-disek-pozitsioner.html
(not actuator) and the the dish with diameter 1,1 meter
>You found a diseqc motor that works with big
> dishes?
1,1 meter is
Is your bud motorized? You found a diseqc motor that works with big
dishes? Because they need bigger motors then can be powered by the card,
they use a different setup. A Actuator that runs on 36v and is told to
move one way or the other and then pulses are counted and then the motor
is told to
I mean any comunication between computer and device. Serial sends 8 bits
at a time too, just have to decode/encode it out
On 6/24/2010 1:01 PM, Luca Olivetti wrote:
Al 24/06/10 20:18, En/na Timothy D. Lenz ha escrit:
On 6/24/2010 1:37 AM, Luca Olivetti wrote:
It's a really simple out of tre
Al 24/06/10 20:18, En/na Timothy D. Lenz ha escrit:
On 6/24/2010 1:37 AM, Luca Olivetti wrote:
It's a really simple out of tree module, you don't need to hack the
kernel, just to compile the module and insmod it.
It hasn't caused me any problem in the many years I have used it.
BTW, the module
Приветствую, Mike
> the rotor plugin ( or at least version 1.4mh) can control one rotor per card.
>
> For c-band you need a vbox to translate the diseqc commands and to provide
> the
> 36 volts to drive the actuator. Thats how I do it. costs about $40
why need vbox for C-band ?
I can watch C-b
I've seen those boxes advertised but hadn't looked at them close yet.
Seen any diy projects for those? designing/building the hardware is
easy, but I'm not much of a programmer. That vbox is what the
electronics part of the small dish rotors are. I was thinking of
building around an Atmel chip.
On 6/24/2010 1:37 AM, Luca Olivetti wrote:
It's a really simple out of tree module, you don't need to hack the
kernel, just to compile the module and insmod it.
It hasn't caused me any problem in the many years I have used it.
BTW, the module uses a parallel port, and since these are becoming
d
Anybody got the Digital+ epg on 19e working with eepg (or some other way
offering more than NOW and NEXT)
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
the rotor plugin ( or at least version 1.4mh) can control one rotor per card.
For c-band you need a vbox to translate the diseqc commands and to provide the
36 volts to drive the actuator. Thats how I do it. costs about $40
(australian). Piece of cake. Or am I missing something?
Mike
Al 23/06/10 23:04, En/na Timothy D. Lenz ha escrit:
I also looked at the Actuator plugin because I am interested in getting
something going with c-band and thought maybe it included rotor
commands. Don't it does, doesn't look like it's been updated since
vdr-1.6.0,
Hi, I didn't update the rele
10 matches
Mail list logo
