Hi,
AFAIK the rpihddevice plugin does not work on RPI4, so consider this on
making hw upgrade. I'm using 3 VDR clients in my home, all 3 are
different RPI3 versions, and they are running rock solid for at least 4
or 5 years.
Upgrading from Pi2 to Pi3 does make sense, as -at least in my
Hello,
I have a couple of questions about my future upgrading.
My VDR is running fine with a single Nexus-S for a couple of years. Beside
the VDR box I have another sat receiver, and I'm thinking about
integrating it in my VDR box via a budget (skystar2?) card.
My goal is:
1. - to have the
On Fri Jan 27 10:26:26 CET 2006 Sean Carlos sean.carlos at gmail.com
wrote:
I hacked it to add additional features. One is an option to do what
you're looking for, -n. See point 5 here:
http://www.antezeta.it/xmltv2vdr.html
Sean Carlos
My problem is, that the above link is working, the
Let me correct myself :)
I made a VDR restart (very unusual for me:) ), and now the subtitles (BBC
Prime - UPC ) are just fine with the patch applied.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
On Fri, 2 Nov 2007, Klaus Schmidinger wrote:
Meanwhile I found that it works ok if you change the line
ts2pes[numTracks++] = new cTS2PES(*SPids++, resultBuffer, IPACKS, 0x00, 0x20
+ n++);
in remux.c to
ts2pes[numTracks++] = new cTS2PES(*SPids++, resultBuffer, 3, 0x00, 0x20
+
This is my CI module:
http://www.linuxtv.org/vdrwiki/images/d/dd/Pci-ci-Rev1.4.jpg
BTW: for a Crytpoworks CAM the voltage should be 3 or 5V?
Thanks.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Finally I bought a mini-jack - jack adapter, and I plugged in the IR
sensor into the CI module. Now I have Cryptoworks CAM and remote control.
Thanks to Ales for pointing me in the right direction, I had no idea that
the CI module is somehow IR related (I don't have any documentation for
the
Hello,
My issue is not strictly VDR related, but I'm using my DVB card
exclusively with VDR for about 2 years.
I have a nexus-s FF card with Hauppauge grey remote, and it's working ok.
Recently I added a CI module to my sistem (with a Cryptoworks module). If
the CI is connected with the flat
On Mon, 29 Oct 2007, Ales Jurik wrote:
Unconnect jumper on CI module - by shorted jumper the IR sensor is at front of
CI module.
Thanks for your reply. Unfortunately I can see only one jumper on my CI,
which is marked: 3V/5V. I suppose it is the CAM's voltage, it is set to
5V.
But I can see
Check what value you have for XV_COLORKEY, using eg. xvattr.
Thanks for reply. I've installed xvattr, I can't see any lines containing
XV_COLORKEY. I use nvidia driver.
Port: 334
Name: XV_SET_DEFAULTS
Flags: XvSettable
Min value: 0
Max value: 0
Name: XV_SYNC_TO_VBLANK
Flags:
On Sun, 13 May 2007, Wolfgang Fritz wrote:
Hope it helps Istvan too.
Wolfgang
I reinstalled ffmpeg-0.4.9 from rpm (and all the dependencies) but I have
the same output. It doesn't matter if i start softdevice with dummy or xv
video output.
I will do some more investigations tonight.
Thanks for your reply.
On Sat, 12 May 2007, Stefan Lucke wrote:
That's only 16bit per pixel. Please try 32bpp.
Done, same result
Can you try to change the OSD drawing mode in setup.conf ?
softdevice.OSDalphablend = 1
I tried, no success.
Three more things:
1. I do not have any
12 matches
Mail list logo