On 28.04.2013 19:45, Udo Richter wrote:
Am 28.04.2013 16:52, schrieb Brian-Imap:
So you assume it was falsely triggering a VDSB thinking 30 secs had
passed when in fact the clock probably was adjusted instead?
Its the only false alarm I know of, and would be an explanation why this
happens on
On 28.04.2013 03:28, Udo Richter wrote:
Am 27.04.2013 14:06, schrieb Brian-Imap:
The single one at the start is what stops me activating the emergency
exit in VDR.
Do you have an in-accurate system clock and/or clock syncing enabled?
VDR will falsely trigger an VDSB if the clock is set more
Am 28.04.2013 16:52, schrieb Brian-Imap:
So you assume it was falsely triggering a VDSB thinking 30 secs had
passed when in fact the clock probably was adjusted instead?
Its the only false alarm I know of, and would be an explanation why this
happens on the start of a recording. Tuning to the
Handling of VDSB should be improved somehow, or at least add some
configuration.
It's annoying if VDR is recording multiple channels, and one channel has
VDSB.. emergency exit at this point will break all the other recordings,
which otherwise would be fine.
Also I think VDR should try tuning to
Hi,
on some channels I get Video Data Stream Broken messages, not sure quite
what triggers them yet.
They continue till the recording has finished.
I have switched off the emergency exit when VDSB occurs, two reasons why:
1. It never cures the problem
2. Occasionally I get a single VDSB
Am 27.04.2013 10:50, schrieb Brian-Imap:
Hi,
on some channels I get Video Data Stream Broken messages, not sure quite
what triggers them yet.
VDSB is triggered if a recording doesn't receive any video data within
30 seconds. Usually this is because either the channel doesn't exist /
doesn't
On 27.04.2013 12:36, Udo Richter wrote:
Am 27.04.2013 10:50, schrieb Brian-Imap:
Hi,
on some channels I get Video Data Stream Broken messages, not sure quite
what triggers them yet.
VDSB is triggered if a recording doesn't receive any video data within
30 seconds. Usually this is because
Am 27.04.2013 14:06, schrieb Brian-Imap:
The single one at the start is what stops me activating the emergency
exit in VDR.
Do you have an in-accurate system clock and/or clock syncing enabled?
VDR will falsely trigger an VDSB if the clock is set more than 30
seconds ahead while a recording is