Am Freitag, den 13.02.2009, 11:36 +0100 schrieb Patrick Maier:
Can you give me the part-number of that chip. Where did you get it?
Hi Patrick,
In Germany, you can get it from Segor:
http://www.segor.de/suche.shtml?foto=0Q=LNBP16M=1
Because of their pretty high Mindestbestellwert, people often
Hi Christian,
In Germany, you can get it from Segor:
http://www.segor.de/suche.shtml?foto=0Q=LNBP16M=1
So it might be a good
idea to ask/search on vdr-portal or offer the spare ones there.
Ah ok :-) so I'll see what i can do :-)
If VDR is tuned to a transponder with vertical polarization,
Mailing List vdr@linuxtv.org
Sent: Friday, February 13, 2009 11:36:28 AM
Subject: Re: [vdr] Use FF Card only as output device
Hi,
I and some of my friends had same problem with ff card (rev.1.3) after 5-6
years.
And replaced LNBP chip (located near bigest capacitor), now everything
work as used
.
- Original Message
From: Patrick Maier mai...@informatik.tu-muenchen.de
To: VDR Mailing List vdr@linuxtv.org
Sent: Monday, February 9, 2009 8:23:13 AM
Subject: Re: [vdr] Use FF Card only as output device
Hi Klaus,
my DVB-S FF card broke down those days. I think it's the tuner
On 07.02.2009 23:01, Patrick Maier wrote:
Hi,
my DVB-S FF card broke down those days. I think it's the tuner of the card,
because it can't lock to a frequency:
- Output of femon -
using '/dev/dvb/adapter0/frontend0'
FE: Philips TDA8083 DVB-S (SAT)
status 01 | signal 6363 | snr
Hi Klaus,
my DVB-S FF card broke down those days. I think it's the tuner of the
card,
So is it possible to use the Tuner of the buget card and use the broken
FF
card only as display device and tell the system not to use the broken
tuner?
You could insert the lines
[...]
at the
Hi,
my DVB-S FF card broke down those days. I think it's the tuner of the card,
because it can't lock to a frequency:
- Output of femon -
using '/dev/dvb/adapter0/frontend0'
FE: Philips TDA8083 DVB-S (SAT)
status 01 | signal 6363 | snr 1919 | ber 080484c0 | unc bfc2d9f8 |
- End of