Thanks for all the help!
On 2/8/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]
> wrote:
Justin, for tape in ID1 ID2 ID3 ID4...
do for i in `bpstulist | awk '{print $3 | sort -u ` do
vmquery -m $tape -h $i done done
where "ID1 ID2 ID3 ID4" etc are your me
On Wed, Feb 08, 2006 at 06:43:08PM +0400, Naidu V. T. wrote:
>
> We have one Master Server Netbackup 5.1 on Windows 2003 and 7 SAN Media
> Servers all on Windows except one media server on Solaris. Our customer
> Wants email notification only when backups have failed. Can anybody
> suggest
> Me ho
On Wed, Feb 08, 2006 at 08:46:24AM -0500, Justin Piszcz wrote:
> Problem:
>
> I have a few tapes:
>
> L00123
> L00124
> L00125
>
> I need to find the status of these tapes across multiple master servers.
# vmquery -m L00123
.../Ed
--
Ed Wilts, Mounds View, MN, USA
mailto:[EMAIL PROTE
Hi, I am using NBU 5.1 MP4 in Windows and
was wondering what command I would use to get a listing of excluded files for
particular servers. I know I can go to each client and see this information,
but I’d like it in a text file.
Thanks
Mike
Hi,
To anyone who's looking, we are currently doing a search for a Sr Backup
Engineer in Houston. It's a full-time permanent position with a company
that has a very large environment. Compensation is highly competitive.
Contact Josh at [EMAIL PROTECTED] if interested.
--
Sr Backup
> Unless I am missing something here IPMP only increases throughput on the
> outbound side of the server. Media servers are typically bringing data in from
> the network.
Without further fiddling, that is correct. If you could get some
clients to use one IP address for the media server and other
Unless I am missing something here IPMP only increases throughput on the
outbound side of the server. Media servers are typically bringing data in from
the network.
Excerpt from docs.sun.com:
Outbound Load Spreading
With IPMP configured, outbound network packets are spread across multiple NICs
w
Your loop below searches the media servers for a volDB, not a list of master
servers. vmquery is specific to the volume database, there's only one per
environment and it's usually on the master server.
Frozen/suspended is per media server, but the volDB contains everything
else.
This is ugly b
This lists the lines in bp.conf that might be media servers but bp.conf,
IMO, can be inaccurate.
I like bpstulist, if the server has a storage unit, then it's a media
server:
bpstulist | awk '{print $3}' | sort -u
-M
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] B
Title: RE: [Veritas-bu] Unable to process request because the server resources are busy
Thanks Bob. We didn't
apply MP4 since we're shortly moving to 6.0 MP1, or maybe MP2, if the move takes
that long :-)
Jason
From: [EMAIL PROTECTED] on
behalf of Bob StumpSent: Wed 2/8/2006 11:46 AMT
This problem is actually addressed in 5.1 MP4 by allowing the use of
/usr/openv/netbackup/STAGING_JOB_KB_LIMIT
/usr/openv/netbackup/MAX_STAGING_JOBS
as explained in technote 280398
>>> "Brooks, Jason" <[EMAIL PROTECTED]> 2/8/2006 11:23:45 AM >>>
So, will this mean a decrease in these errors, if
On Wed, 2006-02-08 at 09:46 -0600,
[EMAIL PROTECTED] wrote:
> Date: Wed, 8 Feb 2006 18:43:08 +0400
> From: "Naidu V. T." <[EMAIL PROTECTED]>
> To:
> Subject: [Veritas-bu] Email Notification from Netbackup 5.1 (Windows)
>
>
> Hi All,
>
> We have one Master Server Netbackup 5.1 on Windows 2003 an
Title: Re: [Veritas-bu] Unable to process request because the server resources are busy
So, will this mean a decrease
in these errors, if seen in NBU 5.x, when one migrates to NBU 6.0?
I've seen them too, and I'm also testing
NBU 6 now before rolling to production.
Jason
From: [EMAIL
Check out FAQ #7
http://www.sun.com/servers/midrange/v880/faqs.html
Austin
On 2/8/06, Paul Keating <[EMAIL PROTECTED]> wrote:
> My thoughts exactly
>
> My 2 HBAs are in the 66MHz slots, but I've been told by several folks
> that the HBAs are more efficient than the GigE cards, and I will see
The status 134 means there aren't enough tape drives to handle all the
requests.
In particular, this looks like a duplication right? If you run backups
and duplications at the same time, the scheduler (pre-6.0) isn't "fully
aware" of duplications and also, doesn't track the drive usage in a
NOTICE OF CONFIDENTIALITY
This communication including any information transmitted with it is
intended only for the use of the addressees and is confidential.
If you are not an intended recipient or responsible for delivering
the message to an intended rec
Some.however, the performance difference between clients with
NET_BUFFER_SIZE = 16k, and those set to 256k is negligable.
Paul
> -Original Message-
> From: Dave Markham [mailto:[EMAIL PROTECTED]
> Sent: February 8, 2006 6:36 AM
> To: Paul Keating
> Cc: veritas-bu@mailman.eng.auburn.e
Justin,
for tape in ID1 ID2 ID3 ID4...
do
for i in `bpstulist | awk '{print $3 | sort -u `
do
vmquery -m $tape -h $i
done
done
where "ID1 ID2 ID3 ID4" etc are your media id's...
should do it...
JdS
Justin Piszcz <[EMAIL PROTECTED]>
Sen
Hi All,
We have one Master Server Netbackup 5.1 on Windows 2003 and 7 SAN Media
Servers all on Windows except one media server on Solaris. Our customer
Wants email notification only when backups have failed. Can anybody
suggest
Me how to notify only failed jobs.
Regards
V.T.Naidu
__
Title: Message
No
problem! There may be other commands, but this is what sprang to
mind
Simon
WeaverTechnical SupportWindows Domain Administrator
EADS
AstriumTel: 02392-708598
Email:
[EMAIL PROTECTED]
-Original Message-From: Justin Piszcz
[mailto:[EMAIL PROTECTED] Se
This was it, thanks!
On 2/8/06, Justin Piszcz <[EMAIL PROTECTED]> wrote:
Hm this works too, but in the host properties -> media servers, bpgetconfig lists things that access the master server (and in the host properties->media servers it only lists the actual (real) media servers.
On 2/8/06,
Yes, this'll work but I am trying to figure out the best way to do it via the command line as I am looking for tapes amongst a vast array of master & media servers.
Justin.
On 2/8/06, WEAVER, Simon <[EMAIL PROTECTED]> wrote:
Justin
Here to be proved wrong, but if Netbackup knows about the tapes
Title: Message
How
about BPGETCONFIG ?
Is
that of any help?
Simon
WeaverTechnical SupportWindows Domain Administrator
EADS
AstriumTel: 02392-708598
Email:
[EMAIL PROTECTED]
-Original Message-From: Justin Piszcz
[mailto:[EMAIL PROTECTED] Sent: 08 February 2006
14
Title: Message
Justin
Here
to be proved wrong, but if Netbackup knows about the tapes, then surely they
should be listed in the Reports Module "Media Lists".
Also,
to prove if Netbackup does know about them and they are in the Robot, doing a
"Media Contents" report will load the tape and g
Say I have a number of media servers, besides looking in /usr/openv/netbackup/bp.conf for them, which may also include non-media servers, is there a command that will show your currently registered media servers?
Thanks,
Justin.
Problem:
I have a few tapes:
L00123
L00124
L00125
I need to find the status of these tapes across multiple master servers.
Is there a text equivalent to list all of the tapes in the:
* Media and Device Management
-> Media
In the Media Manager's Media List?
I have several tapes I need
Bit of a messy log (unless its come through my email system as a bit
scrambled).
Basically, from my own experience I have found is that tracker.exe is
running on a client and there are multiple instances of bpbkar running (too
many for my likeing)
So I end up turning tracker off (if it's a wind
Hi Gurus...
What do you think the cause of the problem presented as the following...
02:52:40.498 [3696.444] <2> ds_dup: read from job 1 <>
02:52:40.498 [3696.444] <2> ds_dup: read from job 1
02:52:40.498 [3696.444] <2> ds_dup: read from job 1 <>
02:52:40.498 [3696.444] <2> ds_dup: read from job
Indeed all that matters is that the media type of the tape matches the
media type of a drive. Of course, if you want to do any backups on new
LTO3 media you will need to change the drive type back again
There is no need to change the barcodes now, it is just that if your
barcodes are actu
Dave
Well change it, see what happens, and yes maybe do some additional testing
if required.
Just wanted to make you aware from experience :-)
Simon Weaver
Technical Support
Windows Domain Administrator
EADS Astrium
Tel: 02392-708598
Email: [EMAIL PROTECTED]
-Original Message-
To be honest i have too but assumed it was because i was on old kit and
using DLT drives
Something for the Dev portion i reckon and see if it alters anything.
Dave
WEAVER, Simon wrote:
Just to add on this, I have personally taken caution not to use this, as I
had problems with restores of th
Just to add on this, I have personally taken caution not to use this, as I
had problems with restores of the clients!
Thanks
Simon Weaver
Technical Support
Windows Domain Administrator
EADS Astrium
Tel: 02392-708598
Email: [EMAIL PROTECTED]
-Original Message-
From: Dave Markha
Hi William
Well I believe I got it sorted, simply by using the GUI and changing the
format of the drive from HCART3 to HCART.
Attempted a restore, tape loaded, data recovered and its all there :-)
I did not need to change the volume name, because this was a month end, with
a retention of 12 mont
Have you set NET_BUFFER_SZ at all on the clients? It may try and
increase the throughput buffer wise from client end where it was using
standard values before.
Dave
Paul Keating wrote:
I can add more GigE cards.matter of fact the box already has a dual GigE
NIC installed.
But I don't w
I think you need rather to change the media type of the media. Currently
they are HCART (as they are LTO1) - the L1 suffix shows that. This
command may be what you need:
Change a volume's media type
/usr/openv/volmgr/bin/vmchange [-h volume_database_host] -new_mt
media_type -m media_id
Whatev
Title: Message
Guys
An
update - I think I may have worked it out - going to device manager, changed the
drive type to hcart for all master and media servers.
just
going to kick a restore off now!! I can always put it back the way it was if
this screws things up :(
Simon
WeaverTechnica
Title: Message
Bob
To add
to my earlier response, I went to the Reports Tool and done an IMAGES ON MEDIA
REPORT for the Tape ID's needed.
@The
density shows HCART
Could
not perform Media Contents - again probably due to the drives being
different!
Simon
WeaverTechnical SupportWindows
Title: Message
Bobby
Ok
this is not going to be as easy as I thought! The Master is sharing 4 tape
drives (all LTO3) to 2 Media Servers as well.
At
least I now know why NBU wont load any tapes into the
drives!
Any
ideas on how I change the tape drive? I thought the whole idea of backwards
Title: Message
You are going to have to change the drive type of one of
the LTO3 tapes to LTO2. It is Backward compatible to read the tape,
however, NB won't load the tape into a drive that is not of the same
type.
The image has the tape type. Make sure that NB sees
the tape media as the
Title: Message
Guys
Wonder if you can
help - trying to perform a restore from a month end backup from 6th Nov
05.
Trouble is, in
December, the Tape Library that was in use blew up and has now been replaced by
a fancy new HP EVL Library using LTO3. The previos Library was
LTO2
Using the
40 matches
Mail list logo