Windoze!!! LOL that's a new one!
Is there no "Daemons" or something??
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: [EMAIL PROTECTED]
-Original Message-
From: Paul Keatin
Mike
I think this is what you are after
Run \bin\admincmd\bpgetconfig on the master server
and look for KEEP_JOBS_SUCCESSFUL_HOURS and KEEP_JOBS_HOURS. It will be
there and it's a long list :-) If it is set to three days, this is what you
see.
KEEP_JOBS_SUCCESSFUL_HOURS = 72
KEEP_JOBS_HOUR
Title: Re: [Veritas-bu] NBU 6 & Library Based Tape License
Alessandro,
Thanks for your reply.
Unfortunately I'm not sure if the
translation comes across exaclty as you meant it; I can guess what you're trying
to say but not exactly sure.
Cheers,
Tim
From: [EMAIL PROTECTED]
on beh
Yes Tim, just to legacy, because if you are using this without licenses, it's
ilegal, please same running fine put your license there, and don't forget
everytime when you will increase a new tape tape drive, this one will work
fine, but purchase and put a new license.
Best Regards,
Alessandro
Hi,
I've asked a few people about this but never had
what I'd call a complete answer (I've been quoted from the admin guide but it's
not hugely helpful as I've already read this and doesn't answer my question) so
hopefully someone knows a bit more about this on this mailing list.
We have NBU 6
I went from MP1, over MP2 to MP3.
MP2 was better then MP1 and MP3 is better then MP2.
I had so BIG problems with loops in NBJM that had no other options just to
apply MP3 into production the same second it came ready for download.
I still have problems with MP3, but compared to MP2 that is now ch
Title: Message
How do you setup your environment to get 2 physical tapes?
do you backup to 2 tapes at the same time or do you use vault to to dup your
tapes?
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Liddle,
StuartSent: Monday, July 10, 2006 4:22 PMTo: Paul Ke
Title: Message
Yea that was one idea we came up with as well. But that
means we have to go and change all of our policy's over. But it is on the table
as an option. Thanks for confirming what we were thinking.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Kea
Title: Message
I would add that, yes, it would be a good idea to keep images on
the VTL for possible restores. However, if you need the space, then you
should remove those images from the VTL as soon as they have been successfully
duped. Our practice is to make two physical tape copie
Title: Message
I
would change the retention in your netbackup policies to be inline with how long
you want the data kept on the VTL.
When
you duplicate/vault you can specify how long you want the data kept on the
"tape" copy, independantly..then the VTL copy will expire itself after the
Title: Emc VTL and netbackup question
Nb 5.0 mp6 Solaris 9 EMC CDL VTL
Ok here is the situation. We are testing this Emc CDL VTL. We backup data to the VTL and now need to get the data on the VTL copied to physical tape and then expire the image on the VTL. We were trying to use vault to pe
Stephanos:
Thank you. Let me explain. In order for us to do what we wanted with disk-based
backups we chose to go from 5.1MP7 to 6.0MP1. We are having issues and Symantec
is asking us to patch to MP3. I was wondering if anyone was at 6.0MP1 and
patched to MP3 so that maybe there would be feedba
Any changes in MP1 or MP2 are preserved in Mp3. So if you plan to install MP3
it doesn't mater if you install first Mp2 and then MP3 or you go directly to MP3
stefanos
> ---Original Message---
> From: Jorgensen, Bill <[EMAIL PROTECTED]>
> Subject: Re: [Veritas-bu] 6.0 MP3 available
>
On Mon, Jul 10, 2006 at 12:19:02PM -0600, Jorgensen, Bill wrote:
> Just a question. Did you patch NBU6 from MP1 to MP3? If so would you
> mind sharing any feedback as to what was better? We are currently at
> 6MP1 and holding until we hear better things about the patches. Anyone
> else in our situa
Ed:
Just a question. Did you patch NBU6 from MP1 to MP3? If so would you
mind sharing any feedback as to what was better? We are currently at
6MP1 and holding until we hear better things about the patches. Anyone
else in our situation?
Thanks,
Bill
--
Bill Jo
Hi, I have NBU 5.1 MP5 on Windows and was wondering if anyone knows how
to change the default time the status listings of each job stays in the
activity monitor.
Thanks
Mike
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng
Oh okay, thanks for the heads up Paul.
Dustin D'Amour
Coyote Solutions Group
505.742.0066
www.coyotesolutions.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Keating
Sent: Monday, July 10, 2006 10:41 AM
To: veritas-bu@mailman.eng.auburn.edu
Sub
There's no client to "restart" per se, on a unix host.
Simon's referring to windoze.
Paul
--
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Dustin D'Amour
> Sent: July 10, 2006 12:39 PM
> To: WEAVER, Simon
> Cc: veritas-bu@mailman.eng.aubur
Haven't restarted the client as it is for DNS, where would I restart the
services for the client? I can't seem to find the command in the /usr/openv
directory tree.
Dustin D'Amour
Coyote Solutions Group
505.742.0066
www.coyotesolutions.com
-Original Message-
From: WEAVER, Simon [mailto
I am experiencing media position errors on a new master/media server using 6.0 MP3. I opened up a support call with symantec and they referred to an internal symantec technote on a known problem. The hardware is Sun branded Emulex SG-XPCI2FC-EM2 on an 890 platform running Solaris 10. They told me
Hello:
My recovery procedure is as follows for a restoration of a wintel box.
Please RFC. I do not use Bare Metal product, ghost, Acronis or any
other layer:
1. provide similar hardware including array controller
2. rebuild fresh OS -- without service packs!
3. during setup create a local accou
Title: Message
Greg
Talk to Wintel - can you find out what they use please, then I can
respond :-)
Regards
Simon Weaver3rd Line Technical SupportWindows
Domain Administrator
EADS Astrium
Limited, B32AA IM (DCS)Anchorage Road, Portsmouth, PO3
5PU
Email:
[EMAIL PROTECTED]
-Orig
Title: Message
I am not sure what the wintel team uses to try and recover
the server before they call the backup team to perform a restore. We perform
full systems backups with checkpoints. But we do not use VSP because of the
problems it creates. The wintel team uses a imaging tool where the
That blows Greg.
Both in initial Netbackup acceptance tests, as well as most subsequent
tests and recoveries, we've had no problems with the documented
procedures.
I've recovered everything from Citrix Metaframe servers (alternate
system drive, M rather than C), DCs, clusters, the works.
Only thin
Title: Message
Greg
That is ABSOLUTELY awful Which brings me onto my next
point. what disaster recovery tools do you use NOW for your windows OS
??
Regards
Simon Weaver3rd Line Technical SupportWindows
Domain Administrator
EADS Astrium
Limited, B32AA IM (DCS)Anchorage Road, Por
Title: Message
Another option.
install the OS as it was
before.
restore the Data / applications?
Regards
Simon Weaver3rd Line Technical SupportWindows
Domain Administrator
EADS Astrium
Limited, B32AA IM (DCS)Anchorage Road, Portsmouth, PO3
5PU
Email:
[EMAIL PROTECTED]
---
Title: Message
Greg
Well I have done it once - which was basically the
following:
No Server OS - completely
scre*ed:
1) using smart start
2) install BARE os Win2k3
3) Install NBU client, plus MP that was on the
box
4) If Domain Controller, reboot in DS
Mode
5) perform restore from master
The fix for us was to install a fresh copy of the Os and
ap0plications. We then restored the application data. Never an easy process. We
were on support line for 6 hours doing this with Symantec support and everything
they had us do would never allow the server to be restored in full and have
Does anyone have a tested, working restore procedure to
recover a windows server failure and crash? I would love to see what steps you
do to recover a windows box.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shyam
HazariSent: Monday, July 10, 2006 8:48 AMTo: WEA
So what was the fix ?
Thanx
-Shyam
On 7/10/06, Hindle, Greg <[EMAIL PROTECTED]> wrote:
Good luck. This has never worked for us. Very rarely do we get a full system restore of windows and have it boot just fine.
Greg
From: [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED]] On Behalf Of Sh
Good luck. This has never worked for us. Very rarely do we
get a full system restore of windows and have it boot just
fine.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shyam
HazariSent: Monday, July 10, 2006 8:48 AMTo: WEAVER,
SimonCc: veritas-bu@mailman.eng.au
Title: Message
Ok well that link does not work for me :-(
Was this a Win2k3 Domain Controller or member server? Did you
build the server with a BASE build (ie: bare OS plus Netbackup client + MP)
?
Regards
Simon Weaver3rd Line Technical SupportWindows
Domain Administrator
EADS Astrium
L
I did the restore as per the DR document. Now the host is continuously rebooting. I found the following technote, Will give it a shot.
http://seer.support.veritas.com/docs/251163.htm
Thanx
-Shyam
On 7/10/06, WEAVER, Simon <[EMAIL PROTECTED]> wrote:
Shyam
It should be covered in the disast
Dustin
The client that's causing the problmes... Have you restarted the NetBackup
service(s) or rebooted by chance?
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: [EMAIL PROTECTED]
Keith
Other than the planning secions on implementing NetBackup and configuring
it, I do not know of anything myself.
What I have learned is the following (and all of this assumes on your
environment or money)
Buy a large Tape Library using the latest LTO technology where possible.
All client LA
Title: Message
Shyam
It should be covered in the disaster recovery
document
But as long as you have a bare OS and the NetBackup client is
installed and the client has been configured as before, you should be able to
perform a FULL RESTORE from a last known backup
tape.
The Restore ca
One of our Windows system crashed during patch install. It has been rebuilt now. I need to restore the OS from tape. I am looking for a procedure. Is there a technote or a procedure I can follow ?
Much appreciated.
TIA
-Shyam
___
Veritas-bu mailli
>From the American perspective:
Was there some kind of game being played this weekend?
Just kidding :-)
Congrats to Italy.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WEAVER,
Simon
Sent: Monday, July 10, 2006 2:04 AM
To: 'Alessandro da Silveira';
38 matches
Mail list logo