Hello Greg
I would try to increase the CLIENT_READ_TIMEOUT and the
CLIENT_CONNECT_TIMEOUT parameters on the client.
Regards
Michael
On Thu, 26 Oct 2006 08:58:48 -0400, Hindle, Greg wrote
> Nb 5.0 mp6 Solaris 9
> I am running a differential backup on a Windows 2000 server and it keep
After I configure drives I tend to use robtest to see if I have them right
m s1 d1
unload d1
m d1 d2
unload d2
etc
m dx s1
The move moves the tape into what the robots thinks is drive 1 the unload
unloads what is configured to be drive one, if
there is a mismatch you find it then (ie it wil
Title: Message
They
won't help? err..won't tell you how to do it? or won't provide someone to do
it?
Our
local Veritas VAR does this as a PS deal..it's inline with "renaming a
master server" which Veritas doesn't "support", so I'm not surprised if they
won't tell you how to do it.
Title: Merging Master servers
We have 1 Red hat Linux netbackup 5.1 master server that we need to merge with a Solaris 9 netbackup 5.0 master server, Symantec support will not help with this. Anyone out there done this or know the best way to do this?
The Linux master will be replaced with a
Yeah guys,
I have already done that, i just wanted a few examples or expereinces from any one of you.
This was an attempt to roll out a small guide explaining our clients the impact of any change on the system that affects backup.
On windows 2000 with SQL 2000, a normal administrative NT acount
I found it. The drive in question was not properly shared.
Jason
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Brooks, Jason
> Sent: Thursday, October 26, 2006 2:44 PM
> To: veritas-bu@mailman.eng.auburn.edu
> Subject: [Veritas-bu] Linux Medi
In testing the Linux media server, I've ran across a problem I've not
seen before. When I initiate a backup that will use the Linux media
server, I received this:
10/26/2006 2:40:45 PM - awaiting resource sharptop-hcart3-robot-tld-0
Reason: Tape media server is not active., Media Server:
sharptop
I've had this happen when the drive needed to be cleaned
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave
Markham
Sent: Wednesday, October 25, 2006 6:14 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Tape not mounting
Netbackup 4.5mp6
I think I've just found mine. The drive in question issued a Tape Alert 37
Drive Voltage Limits Exceeded. Not sure why, currently on hold with
ADIC/Quantum support. The ADIC GUI says replace. We'll see what a human says.
Jason
> -Original Message-
> From: [EMAIL PROTECTED]
> [mail
OddI've had similar misconfigurations, thanks to autoconf/configwizard, and
what I experienced, was a tape getting loaded into a drive,the drive going
"DOWN", then another tape in another drive, that drivegoing "DOWN", repeatedly
untill all drive were down, but no tapes wereused.
Paul
--
>
on a different site
but on a same domain. I am looking for any documentation that suggests
how to set this server up? Do I create a second master server?
Your help is appreciated.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mailman.eng.a
I had this happen to me when my drives were mismatched on the robot. I
had a robot with 4 drives and what the robot called drives 0,1,2,3 were
actually configured in NB as 0,3,2,1. When tape went into NB drive 3,
it was actually in robot drive 1. I confused NB and used all of my
tapes. I had to
Title: Message
with
5.x, you configure a number of retries and a retry period.
ie, 3
tries in 12 hour period, it will fail up to three times, requeuing after each
failed try, untill the max of three tries is reachedif all 3 fail, it will
wait 12 hours, and if the window is still open,
Title: Message
It has been
about a year since I ran 5.1 so I don’t quite remember how they ran but
with 6 a failed backup, like a full monthly, will retry at your set frequency
(in our case 12 hours) until it completes with a 0 or 1. Sometimes it will try
and run the same job everyday for a
Title: Script to query Logging level on all clients
Is there any CLI or script used to poll all the clients for their logging level? For sql client too :)
Thanks,
Hadrian
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://m
Hi Greg,In my last site we ran everything on VCS so we setup our master server as a clustered application within that framework and NetBackup has all the scripts to install on cluster nodes - this gives you cover for local hardware failure. To cover us for site failure we used VVR/GCO in async mode
Asif,
Do /dev/rmt/cbn definitions exist? More then likely the drives might
have tapes stuck in them. Try mt -f /dev/rmt/?cbn? status to see if tape
are stuck. Also perform a robtest. If you run robtest make sure no jobs
are active. Also look at your logs /usr/openv/vol/debug for more
information.
Title: Message
Your
master server must be licensed.
if
you're backing up the "OS" on your Exchange environment then you will need one
windows client license per hostie, a three node cluster, you'd need 3
windows client licenses to backup C: System_state, etc, then you'd need one
Excha
I have a tape went down due to overheat room temperature. The room
cool down since then but the tape still shows down. Is there a way I
can bring it back up remotely?
tpconfig -d
Index DriveName DrivePathTypeShared Status
* * **
Hi,
I am planning NetBackup
installation. I need to know what licenses I need for Exchange
Server.
I have one Master server and one set of
Exchange clustered server connected to SAN that I would like to backup.
It will be a SAN backup.
Please let me know what licenses I shou
Yes, they're all set up as others. Proper density and type as well.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Hindle, Greg
> Sent: Thursday, October 26, 2006 9:05 AM
> To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu
> Subject: Re: [V
Title: Linux to Solaris 10 master
We have a netbackup 5.1 server running on Linux. Our UNIX team wants to replace this master server and run Solaris 10. Does netbackup store the catalog different under Linux than it does under Solaris? Are there any gotcha's I need to worry about when copying
All,
We're purchasing the Advanced Client option to enable us to pull raw
data off our HDS SAN and as a bonus I'd like to use Flashbackup to grab
our fileservers. My question is, how processor/memory intensive is the
backup? The Media servers are specced' as follows (3 of them)
Dell PowerEdge
NB is probably freezing all of these tapes and that is why you ran out
of tapes. Do you have the correct bar code rule setup for these new
tapes?
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brooks,
Jason
Sent: Thursday, October 26, 2006 8:51
The last two mornings, I've come into work finding my scratch pool all
but empty, consumed by an Exchange policy. Digging in, I found that the
job reported a Tar write error and requested new media. This must have
gone through all 50 or so scratch tapes, dumping them into the Exchange
pool with n
Title: Error 14, weird problem
Nb 5.0 mp6 Solaris 9
I am running a differential backup on a Windows 2000 server and it keeps failing with error 14 tar file write error 40. When I look at the backup it keeps hanging when it tried to backup a particular file /system_state/boot_fil
Title: Netbackup server clustering
Nb 5.0 mp6 Solaris 9
We are thinking of cluster our master server. Does anyone else cluster their server? Can someone send how they did this and why/advantages?
Greg
>>> This e-mail and any attachments are confidential, may contain legal,
professional
If I'm not mistaken, Windows Applications can only use up to 3GB (with
David's Boot switch, below) and any memory usage after that has to be
done with Address Windowing Extensions (AWE) where the application
itself bypasses the given 3GB Virtual Address space and writes pages
directly to RAM. I'v
http://support.microsoft.com/kb/283037 This could also be worth a look!
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PRO
Try using this switch option
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server
2003,Enterprise" /noexecute=optout /fastdetect /3GB
If you want more info on the switch settings go to
http://support.microsoft.com/kb/833721
David Spearman
County of Henrico, Va.
-Original Message-
Hello
We have a Windows 2003 SP1 master/media server with 32GB RAM but it is only
using about 1-2 GB of it and have over 100 pages/sec when running backups.
The line in boot.ini looks like this
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003,
Enterprise" /noexecute=optout /fast
31 matches
Mail list logo
