Re: [Veritas-bu] Solaris 10 ZFS filesystem

Glad to hear it - I'm doing the same thing. I got the okay from Symantec in that there were no know issues with ZFS so I went for it. I did a clean install of NBU 5.1 MP6 on Solaris 10 on a Sun fire v440. Catalog is on a RAID-Z array. I bought the v440 used and I discovered I have one of the e

Re: [Veritas-bu] Doubts about license

Sorry, NBU 6.0 Keys are not backward compatible. Backups done in NBU 4.5 will be restorable from NBU 6.0. No you can't install any NBU 6.0 bits with 4.5. NBU 4.5 is out of support now and cannot be used with a NBU 6.0 Master either. Dave David K. Carpe Principal Systems Engineer Symantec Corpo

Re: [Veritas-bu] The replication of /usr/openv to Disaster Site

I'm replicating /usr/openv/netbackup/db/images for DR with 'rsync'. Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fred Grieco Sent: Monday, April 23, 2007 12:42 PM To: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] The replication of

[Veritas-bu] Doubts about license

Hi, Could someone help? I need to know if the license for NetBackup 6.0 can be used for Netbackup 4.5. If I do a backup using NetBackup 4.5 this backup will be read on 6.0? If have modules - Exchange and Novell for NetBackup 6.0, can I install them on Netbackup 4.5? Thanks

Re: [Veritas-bu] NDMP backups very slow

I bet your issues will be the snap vault exchange volumes. We have not resolved our issues and we have been on Netapp to address why these exchange volumes are twice as slow as the regular volumes when backing up. Greg From: Khan Imran A [mailto:[EMAIL PROTECT

Re: [Veritas-bu] The replication of /usr/openv to Disaster Site

On Sun, 22 Apr 2007, Asiye Yi?it wrote: > Hi All, > > Is there anyone to replicate /usr/openv to the Disaster Site for NB 6.0? Regards, > > > > Asiye Yigit > > > > >>This is a question everyone has, Symantec is supposed >>to be able to ... Consider writing hot catalog backups to a share at you

[Veritas-bu] Bad Image Header

I ran the Problems report this morning to look through. I'm finding numerous entries like the following, usually clustered: 4/20/2007 9:36:39 AM masterA Error 0 General Bad image header: Windows_Differential_Perimeter_1137677808_INCR, error: file read failed (13) We're

[Veritas-bu] allowing user restores

Normally we initiated restores from from the server, so allowing users to restore data is not normally done. However, now that I do want to do it, I can't. I've enabled free browsing and client restore as global client attributes, as well as specifically allowing client browse, restore and fre

Re: [Veritas-bu] NDMP backups very slow

Hi There 3020 configured for NDMP backups has three vols they are as follows - /vol/exch_vs1 - this is snapvalt volume on a 3020 filer snap vault'd from a 980 filer at the production site, the data is Exchange db and logs snapshots - this ran at 2mb\sec /vol/exch_vs1 - is snapvalt

Re: [Veritas-bu] NDMP backups very slow

We also use NDMP in this manner. We have found that some volumes on the NAS backup slower than others. We are still looking into the issue but our issues is these volume are snap mirrored and for exchange and these backup twice as slow as the regular volumes we have. Check to see if these are snap

[Veritas-bu] Tape counter missing

I have no performance meter tape counters or NBConsole 'Drive Use History'. I think I've satisfied all the requirements. Suggestions anyone? I've recently installed the Veritas drivers, having been using HP drivers. I've ticked 'enable performance data collection', I do have permission to read

[Veritas-bu] Tape Cleanup

At a remote site we have mixed media types of dlt and dlt3 for the tapes all of which are sdlt(600 gig) tapes. The media density for the storage group was incorrectly set to dlt at the time we went from standalone drives to this robot . This is a twin drive sun branded robot. We need to change t

[Veritas-bu] NDMP backups very slow

Hi Can anyone help with this issue? We have a NetApps 3020 filer connected directly (no FC switch) to two HP LTO3 drives. The drives are in a SL500 library and the library robot is directly connected to a windows NetBackup v6.0Mp4 master. We are using the NDMP licence to backup the vols on

Re: [Veritas-bu] iostat not showing tape stats - SLES 9...

Thanks for you’re your quick replay and your tip on the SAN switches.. I will push our vendor for this feature.. And this is very much at limitation in HP-UX as well. Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [E

Re: [Veritas-bu] iostat not showing tape stats - SLES 9...

Tape device stats aren't currently supported in the Linux distros that I've seen - the instrumentation isn't there in many of the block device drivers. I beleive this is also a limitation on HP/UX and some other BSD-derived O/S's but I'm not sure on this. If you're using SAN attached tape drives

[Veritas-bu] iostat not showing tape stats - SLES 9...

Hi all, I can't get any stats from my tape drives on my SLES9 media server with iostat, I have tried most options to iostat. Is there other way to get the tape stats? Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)