Nothing wrong with the GUI !
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: [EMAIL PROTECTED]
-Original Message-
From: Steve Fogarty [mailto:[EMAIL PROTECTED]
Sent: 24
Logs will be purged with a STATUS 0 - anything higher will mean the logs
remain.
So you will need to try and identify what has happened or been skipped.
Ideally, you should be doing a DB backup for the logs to be purged.
Maybe you could try not doing Mailbox Backups (Brick level backups).
Mike
I just posted something similar, but take a look at this link..
http://support.microsoft.com/kb/823176
http://support.microsoft.com/kb/823176
I personally do not see the need for BLB (brick level backups) of Mailboxes.
The performance you get for the IS is very good - BLB does not
Anas
Several reasons - one for example is to allow a Media Server share the SAME
TAPE DRIVE / LIBRARY that is connected to your Master Server.
by default, when you install a Master Server, it is also a Media Server as
well :-)
Also, you can specify and schedule jobs to run on this Media
You can't change the bar code rules like that in mid stream. It would
change the media id of every tape already in the library and put every
existing tape in scratch.
You are going to either have to partition the drives in separate partitions
(Yuk), or just pick your default tape type and add
On the master, it is set via the client attributes. It is a per client
setting. It can also be a global setting, but I don't know the parameter
(it is not on the GUI settings).
You can let them browse, but not restore or neither or both.
Bobby Williams
2205 Peterson Drive
Chattanooga,
Hi
I don't get the full VM mounted when I'm using the VCB netbackup integration
module. In the pre_policy log I get this:
[2007-04-25 11:54:40.699 'BaseLibs' 4492 warning] [Vmdb_Unset] Unsetting
unknown path: /vmomi/
Any ideas/suggestions ?
Regards
Michael
--
Cybercity Webhosting
Douglas,
For what it's worth. We do NDMP with virtual cif servers on an emc
celerra (clariion disk space of course). Does the throughput increase?
Yes and no. Sure, it shoots the data down the line faster however NDMP
is a single threaded job. One NDMP job, one tape unit. In truth I can
multiplex
We have a Clariion, but currently do backups via the server that mounts the
LUN. I've thought about NDMP, but never dug into it.
Which Clariion do you have? We're running a CX500. I'm not even sure if we
have NDMP for it, if it's licensed, etc.
Jason
-Original Message-
From:
Think you have to restart the services/daemons on the master, to get the new
storage units in use.
Regards
Michael
On Wed, 25 Apr 2007 13:59:16 +0100, WEAVER, Simon (external) wrote
All
Win2k3 _ NBU5.1+MP2 - Master and 15 media servers
2 New SAN Media Servers implemented - the Device
Yes Sort of gathered that But still does not work!
Any other ideas?
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: [EMAIL PROTECTED]
-Original Message-
From:
Did you bounce NetBackup after you added the storage unit?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WEAVER,
Simon (external)
Sent: Wednesday, April 25, 2007 8:59 AM
To: 'veritas-bu@mailman.eng.auburn.edu'
Subject: [Veritas-bu] Media Server
When connecting to master server 6.0 mp4 from Windows client Java
console we are getting a java error, when selecting Device Monitor, here
is the error
Unable to obtain display for Device Monitor.
Error:java.lang.NullPointerException
See log file for details
http://www.dcvast.com/
I believe you can get this when resources (memory?) are overloaded on
the master/media. Can't be more specific as only seen it very rarely
so haven't investigated thoroughly.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Brooks, Jason
Sent: 24
thanks, but it doesn't work from the console either.
At 10:44 am +0200 24/4/07, Schindelasch, Frerk wrote:
Are you logged on directly on the Windows console? RDP will not work.
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Im Auftrag von Chris Freemantle
On 5.1 at least, the global setting is at the top of the Client
Attributes settings i.e. in the NetBackup Administration console, go
to
Host Properties - Master Server - master server
In the Master server Properties window, go to 'Client Attributes'
At 6:43 am -0400 25/4/07, Bobby Williams
Can anyone tell me where the tpautoconf -show gets it device information
from?
Is it on the OS level or a NBU level?
I believe it is on the NBU device database, but I would to be correct.
Thanks
Christopher C Costa
Sr. Backup Engineer
Mobile 718.757.7176
Email [EMAIL
Thanks everyone!
Regards,
-cj
Courtenay Jones
-Original Message-
From: Chris Freemantle [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 25, 2007 11:00 AM
To: [EMAIL PROTECTED]; Jones, Courtenay;
Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Client Directed Backups
I believe it gets it from however many devices are set up in st and
sg.conf files and the devices don't even need to be configured to the
O/S and will come back with a c*t*l* configuration as opposed to
/dev/rmt.
If you run /usr/openv/volmgr/bin/goodies/scan -tape the information
should be the
Two ways...buy the partitioning license for your i2K and have a separate
logical library for LTO2's and LTO3's
:-)
Or you can do it based on media type.
HCART2 Media (LTO2)
HCART3 Media (LTO3)
HCART2 Storage Units
HCART3 Storage Units
NBU will only mount HCART2 media in an
Thanks everyone for your replies,
David Spearman
County of Henrico
-Original Message-
From: David Chapa [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 25, 2007 1:03 PM
To: Spearman, David; veritas-bu@mailman.eng.auburn.edu
Subject: RE:
You didn't stop me from doing it, so it's your fault
I love that one.
--
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Jones, Courtenay
Sent: April 24, 2007 5:54 PM
To: Veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Client Directed
You apparantly have rather small IS's
Best case I can restore a small 1/2 TB IS in 7-8 hoursBEST case.
Depending on the user, that may have blown the SLA by 4 times.
--
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WEAVER,
Simon (external)
Sent:
You think THAT's bad. I once had an older relative tell me they let the phone
company disconnect the phone because the phone company kept letting the husband
charge long distance calls back to the home phone. In the wife's opinion the
phone company shouldn't have allowed the husband (in
--
So let me get this right...
You can pull 3 streams of file level CIFS data over GigE faster than
your filer can write to tape over fiber HBA?
I suppose I could if nothing else was running, but sending the Filer to
tape using NDMP means my network IO is free to pull in data from Network
I am thinking about purchasing the Storagetek SL8500 Library and I'm
wondering if anyone out there has any input or experience on these
units?
Veritas Netbackup 5.1
Windows Master
4 Windows Media server
3 Netapp Filers
thanks
___
Ola Silvio...agora ficou melhor...hehehehehehehe
Vamos la, sim voce pode estar montado as areas em um servidor e estar
fazendo o backup a partir destas, sem a necessidade de estar
instalando/utilizando um agente NDMP, a desvantagem deste tipo de backup e
que ele fica um pouco lento. Com relacao
Doesn't look like ndmp is an option without using emc's backup software
and some more of their hardware.
Even though EMC say's not to do this, I may play with mounting disk to
both the original server and the backup server at the same time, change
the backup policy to not reset archive bit and
Paul
The post was talking about backups of the IS / BLB of mailboxes.
Restore sounds ok for that size! Is this over fibre (Media) or Network (LAN
client)
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road,
We have 2 of them. What type of tape drives are you going to populate it
with? What kind of questions do you have?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Turner
Sent: Wednesday, April 25, 2007 2:06 PM
To:
I have a couple as well- same, what are your questions? Current issue
we're having now is rail-alignment issues-- old firmware causes this.
OVerall though they are fairly robust as long as you order it fully
redundant.
On Wed, 25 Apr 2007, Hall, Christian N. wrote:
We have 2 of them. What
We haven't done NDMP with Clariion but we DO use a disk storage unit we
created for backing up one of our Oracle Databases via RMAN and
Netbackup.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Preston,
Douglas L
Sent: Wednesday, April 25, 2007 2:27 PM
We plan to use SDLT 600 tape drives. We may have to expand in order to
support R D but they use IBM LTO Libraries and I am wondering how well
the SL8500 works with the different drives and tape formats.
From: Hall, Christian N. [mailto:[EMAIL PROTECTED]
What is the output u get from running it ?
I think -show switch is the same as -t on NIX .
In this case, the short answer is Both.
/usr/openv/volmgr/bin/tpautoconf -t gets the list of NBU configured
devices from /usr/openv/volmgr/database/ltidevs and then talk to those
tape drives via SG driver.
We have three SL8500's in our environment. They have been in service for
about two years.
Our experience had been good. We just upgraded from Netbackup 5.1 to
Netbackup 6.0MP4, and
there were no problems with the libraries due to the upgrade. We have had
a few hardware problems
with the
Same here. Alot of our problems were with the robotics. All is well
now..
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, April 25, 2007 3:22 PM
To: David Turner
Cc: veritas-bu@mailman.eng.auburn.edu;
[EMAIL
SL8500 is a BigBrother of SL500, I beleive.
I have SL500 with 8 LTO2 drives here for 3 years and haven't had a
*single* issue with it.
No stucked or droped tapes, no issues with robotics ... works like a
clock.
--
Misha Pavlov
Société Générale
This message uses only 100% recycled electrons.
Ola Silvio,
Perfeito, esta tecnica de utilizar areas montadas com NFS em outras
maquinas funciona sem problema algum, tanto para o backup quanto para o
restore, sem a necessidade de comprar o agente NDMP.
Tenha certeza realmente ele e bem caro e dependendo do tamnho de sua
empresa, realmente o
Master Server: Sol 10 on Sun v440, Netbackup 6.0 MP4 connected to PX506
via fibre San
Media Server: Sol 8 on Sun v880, Netbackup 6.0 MP4 connected to (same)
PX506 via fibre San.
I cannot get my Sol 8 Sun v880 netbackup media server to create the
/dev/rmt device nodes. The /devices/st* files
I'm currently on 5.1mp6.
I want to do a new install and redetect the drives on the clean install.
Is there a method of importing/converting just the catalog over to 6.0
including the db's on the media servers that tells the system when to
expire tapes.
kenneth
unsure of your see your deviceses in cfgparameters...might work fine,
but I ususally do a cfgadm -al -o show_FCP_dev which will show if the
FC devices are visable.
You'd want to see
c#::WWN,LUN# tape connectedconfigured unknown
for every tape device, plus an entry for the
Mike,
Can you run a luxadm probe this will tell you what is logging in to the
fabric.
Send the output.
--- Sponsler, Michael [EMAIL PROTECTED] wrote:
Master Server: Sol 10 on Sun v440, Netbackup 6.0 MP4 connected to PX506
via fibre San
Media Server: Sol 8 on Sun v880, Netbackup 6.0 MP4
No - changing the media id generation rule (MEDIA_ID_BARCODE_CHARS in
vm.conf) affects the media id. Changing the barcode rules (potentially)
changes the media type and volume pool. Existing tapes won't be
reallocated to a new pool on a barcode change - if they did then every
inventory of the
43 matches
Mail list logo
