[Veritas-bu] restore failed to recover the requested files

I am using netbackup 6.0 . When I tried to recover one folder , it has failed with following error message --- 04:04:04 (5445.001) Status of restore from image created Sat 06 Oct 2

Re: [Veritas-bu] sso question

You can load tapes from the master because it has the robot control and just loads the tape into a position in the library. You can't unload them, because the master server can't send the mt commands to the tape drive to unload the tape that the robot can then grab. Unless you know that you can f

Re: [Veritas-bu] sso question

On 10/9/07, Dave Markham <[EMAIL PROTECTED]> wrote: > > guys i have master server running sol8 connected to L700. > > L700 has 7 drives in it. > > Master can see 6 of them through fiber > > Med1 can see first 3 drives shared > Med2 can see first 3 drives shared > > Med3 just added has access to dri

Re: [Veritas-bu] sso question

This is a perfectly good configuration. You've just uncovered a limitation of using robtest where the robotic control host can't see the drives. In an L700, I'd be surprised if you actually needed to issue the unload command (lots of libraries can now accomplish the unload automagically while doi

Re: [Veritas-bu] NBU 5.x to 6 upgrade guide.pdf

Thanks for the rapid response all Dave From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Clooney, David Sent: Tuesday, October 09, 2007 9:03 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] NBU 5.x to 6 upgrade guide.pdf Hi all

[Veritas-bu] sso question

guys i have master server running sol8 connected to L700. L700 has 7 drives in it. Master can see 6 of them through fiber Med1 can see first 3 drives shared Med2 can see first 3 drives shared Med3 just added has access to drives 5,6,7 and can see them fine. I have just loaded a tape on the mas

Re: [Veritas-bu] NBU 5.x to 6 upgrade guide.pdf

Here is the link: http://seer.entsupport.symantec.com/docs/290141.htm From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Clooney, David Sent: Tuesday, October 09, 2007 9:03 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] NBU 5.x to 6 up

[Veritas-bu] NBU 5.x to 6 upgrade guide.pdf

Hi all Someone sent me the NBU 5.x to 6 upgrade guide.pdf document a while back however I have deleted it by mistake due to mailbox limits. And yes, I should be shot for not backing up a copy :-) If that someone could forward it again it would be much appreciated Thanks Dav

Re: [Veritas-bu] Script to label expired tapes in a VTL

I have a similar question...I think I have retired three media servers, well actually rebuilt two with new names and new IP and renamed the third...(All Windows 2003 NBU 6.0 MP4) I know NBU does not like renaming...and no like a dope I did not follow the retire media server documentation. Lesson

Re: [Veritas-bu] Script to label expired tapes in a VTL

Hi Larry This sounds as though it may be an answer. The thing to look out for is that the data on the tape is cleared. This can only be tested in a lab as there is a portencial for backups failing! Kind Regards, Clem Kruger -Original Message- From: Larry Mascarenhas [mailto:[EMAIL