Hi Darren
To be honest, I started to give up !!
What I did discover is that from the Backup, Archive, Restore tool, I
can select my Master Server and under Policy choose NBU-Catalog and from
here, I can see file images of the clients !!
So I think this answers my question ? :-)
Simon
-Origi
On Thu, Sep 17, 2009 at 05:58:11AM +0100, WEAVER, Simon (external) wrote:
> Darren
> Running this command reports "no entity found" !
They're both a bit persnickity with options. These are general commands
to show files in an image. You'll need to give enough options to
identify the image in qu
Darren
Running this command reports "no entity found" !
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of A Darren
Dunham
Sent: Wednesday, September 16, 2009 8:10 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subj
Hi,
I have issue with NDMP backup,as the backups fails with error 96 while it
has completed 14% of data .Even we do have sufficient tapes in the
scratch pool and when i look for the bptm logs i do find the below
errors,i am using 6.5.3
Any suggestion on this
RequestSpanResources: MultiResReq.cpp
> For a particular guest, there is a 1TB VMDK, but there is currently only
> about 100GB of data on the VMDK. We see it get through the 100GB in record
> time, but then it just keeps going until it gets through the whole disk.
>
> Is this normal?
I believe this is the way that FlashBackup w
We have Netbackup Enterprise 6.5.4. Using VCB to backup our VMware
infrastructure (ESX 4, vCenter 4).
We're using a Flashbackup-Windows, 0-file, ALL_LOCAL_DRIVES policy to backup
our VMware guests. The odd thing we're encountering is that no matter what we
do, Netbackup is scanning through t
On Wed, Sep 16, 2009 at 09:13:06AM -0400, Justin Piszcz wrote:
> It all depends how long you want to wait to restore a file if you have
> large backups that can span a tape completely.
>
> With 1TB fragment size, assuming there was no compression and you needed
> to restore a 10k file at the end
I'm still on LTO2 and have the max fragment size set to 8GB. That's a file
every few minutes if the drive is allowed to run full speed. Will probably
multiply by 2 or 4 when I ever upgrade.
Jim VandeVegt
VandeVegt @t yahoo.com
On Wed, Sep 16, 2009 at 07:50:18AM +0100, WEAVER, Simon (external) wrote:
> I have not found a Technote that suggests how to move images in 6.5
> using the ALTPATH method.
Nor I. But I did find that it worked in some aspects on unix with
symlinks.
> Presently, all images are in a folder H:\NetB
Thank you all for your help. Mark's solution below, of using vmoprcmd
worked like a charm.
Now, to revamp our tape handle procedures to ensure that this doesn't
happen again.
Again, thank you to all who responded.
Jason
-Original Message-
From: Donaldson, Mark [mailto:mark.donald...@st
And database size. Every fragment is another record in the image
database.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of WEAVER,
Simon (external)
Sent: Wednesday, September 16, 2009 7:38 AM
To: Justin Pis
Hello All,
Does anyone know what the RB_ tables in the EMM database are used for and
how they are created? Any help would be appreciated.
Regards,
Patrick Whelan
VERITAS Certified NetBackup Support Engineer for UNIX.
VERITAS Certified NetBackup Support Engineer for Windows.
tape drive will use LOCATE BLOCK to first file to restore, then search from
there.
wdlb5359 wrote:
> What are people using for the fragment size on LTO4 (or I guess LTO3) with
> NBU 6.x?
>
> I ask because the default is 1TB, i.e. more or less don't fragment.
>
> The argument for a large f
Hi,
This is probably very simple but not having done it before I thought I'd
ask the experts :-) We've got a windows infrastructure running nbu 6.
All we backup is flat files, with a mix of network, VSS and clariion
scripted snapshots. Our SQL servers run their own backups to backup
drives and the
I've got two suggestions. I used to manage one site without a barcode
reader. We used bephyinv to physically mount each tape and read the
media header. You would have to disable your barcode reader to pull
this off. A better solution (although I can't recall ever doing this)
would be to us vmch
Ideally, I try to go for FAST restores. I feel our backups are quite
quick.
We also use buffer settings on some Media Servers that contains large
amounts of Data.
I guess it is a weigh up between performance and fast restores.
Simon
-Original Message-
From: veritas-bu-boun...@mailman.en
Run `bpconfig -L` to get your "Display Reports" setting. You may find it to be
some absurdly high number not found in nature, like mine was:
# /usr/openv/netbakcup/bin/admincmd/bpconfig -L
...
Display Reports:6357058 hours ago
...
Now somehow, `bpadm` uses the above value to come with.
Hi,
1. Do you have enough scratch media?
2. Did you check your robot to make sure it is not locked up/frozen?
Justin.
On Wed, 16 Sep 2009, niranjana Rajappa wrote:
> Hi ,
>
> I am facing a issue while backing up a NDMP vol from filer .it throws up
> with error 96 and inturn we do have enough nu
Simon,
Yes, the fragment size for the storage unit itself, see my other e-mail.
Justin.
On Wed, 16 Sep 2009, WEAVER, Simon (external) wrote:
> Are we talking about fragment size for the storage unit itself?
> Mine is set to the default 1048575MB
>
> I thought the default would be acceptable for
Are we talking about fragment size for the storage unit itself?
Mine is set to the default 1048575MB
I thought the default would be acceptable for LTO3/ LTO4. (ie:
1048575MB)
But happy to hear what others do
Simon
From: veritas-bu-boun...@mailman.eng.auburn.ed
Hi ,
I am facing a issue while backing up a NDMP vol from filer .it throws up
with error 96 and inturn we do have enough number of scratch tapes in
pool.This happens once the backups are started and running ,then it
throws this error .
Any inputs on this?
00:25:39.712 [4840.1816] <16> RequestSpa
32GB here.
It all depends how long you want to wait to restore a file if you have
large backups that can span a tape completely.
With 1TB fragment size, assuming there was no compression and you needed
to restore a 10k file at the end of the tape, it would need to read the
entire thing to rest
20GB here, using IBM 3592. I've considered making the fragment size larger,
but . if it aint broke
On Wed, Sep 16, 2009 at 7:26 PM, wrote:
> What are people using for the fragment size on LTO4 (or I guess LTO3) with
> NBU 6.x?
>
> I ask because the default is 1TB, i.e. more or less don'
I'm using a 10G fragment size. Just a guess at a ballpark figure
between too small & too large.
-M
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
william.d.br...@gsk.com
Sent: Wednesday, September 16, 200
Just inserting them into a drive should be enough. After they're in,
look at vmoprcmd -d ds on the media server that sees that drive.
The ExtMID is the External Media ID - supplied via the robot's interface
- the RecMID is the on-tape media ID - it's the from the header info.
When you find it,
New drives are faster.
We had replaced the 2GB fragments with 8Gb fragments.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
william.d.br...@gsk.com
Sent: Wednesday, September 16, 2009 12:26 PM
To: veritas-
Hi all, I'm brand-new to the list, and apologize that I don't have time for
introductions before I have to get down to business.
One of my Operators mistook three active tapes for scratch, pulled the labels
off, and inadvertently mixed them in alongside 23 other label-less tapes.
Is there any w
What are people using for the fragment size on LTO4 (or I guess LTO3) with
NBU 6.x?
I ask because the default is 1TB, i.e. more or less don't fragment.
The argument for a large fragment is that the backup doesn't have to stop
so often as it does briefly at the end of each fragment to update the
If you are on NBU 6 consider a couple of possibilities.
There are some things that require you to have both short and
fully-qualified names in the EMM database. I could imagine a database
error if that kind of lookup failed. There is a command to add aliases
for media servers.
nbemmcmd -mach
29 matches
Mail list logo