Hi Folks,
I've got a solaris 5.10 server with a HP tape library (Model MSL2024 1 LTO-4
Ultrium 1760 SAS Tape Library AK378A) connected to it by SAS.
I'm running Netbackup 6.5 on the solaris server, but from the netbackup java
console, I CAN'T find the media device attached to the host through
Good Morning,
Did you install the netbackup sg driver?
Which drivers are you using?
len
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of rico78
Sent: Thursday, November 10, 2011 9:51 AM
To:
Did you install the netbackup sg driver?
Which drivers are you using?
Hmm I guess no! :(
I'm using the default SCSA installed with Solaris:
# /usr/sbin/modinfo |grep sg
142 f01cb000 1af8 97 1 sysmsg (System message redirection (fan)
222 f0a75000 2e70 231 1 sg
Any chance you are using Sol10 U5? If so then read this article
from HP about disappearing libraries/drives.
http://h2.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=encc=ustaskId=110prodSeriesId=463702prodTypeId=12169objectID=c01536454
Ken
-Original Message-
From:
If none of that leads to anything, you will need to follow these high
level steps:
This is all discussed in the NetBackup Device Configuration Guide. I
highly recommend reading that.
Connect or zone the robot and drive(s) to the server, this may require a
reboot if SCSI attached
Execute devfsadm
Hi,
I'm searching back through the archives for any discussions about NBU
appliances (as well as on SymantecConnect). Below is one of the few
threads I've found.
Have been looking at the 5220, weighing up the different model
options. To get I/O config for backup and tape out, you have to
forgo
