And if you're going to do that, try 'MobaXterm'.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Lightner, Jeff
Sent: Thursday, November 20, 2014 10:02 AM
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: Re:
Documented here:
http://www.symantec.com/business/support/index?page=contentid=TECH10824
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Simon Weaver
Sent: Tuesday, November 05, 2013 10:01 AM
To: VERITAS-BU@mailman.eng.auburn.edu
] On Behalf Of Simon Weaver
Sent: Dienstag, 5. November 2013 16:31
To: Stier, Matthew
Cc: VERITAS-BU@mailman.eng.auburn.edumailto:VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] HP ESL G3 Tape Library Barcode Issues
Matthew
I do not have anything like this in VM.conf
I have existing Tape
This is typical behavior.
On most systems, the routing of each packet is determined when the
packet is about to be sent. Just because it comes in a NIC, does't mean
it will response will respond through the same NIC.
Since you have multiple interfaces to the same logical network, the
I discusses this with Symantec a while back. The media servers have to
be global zones, since non-global zones lack permissions to control
libraries and drives.
At the time we discussed the merits of placing the master in a
non-global zone, but they confessed that they had not pursued it.
-sec 1
Set interactive timeout to '1' second.
This is not documented in the vmchange manpage, but you can find
information on Google by searching vmchange sec 1.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On