We use QLogic and we seem to have found workaround.
Whenever drives go down we reset the down drive ports from the switch side
and then drives come up. Now we don't need to reset the drives physically.
On Mon, Apr 16, 2012 at 4:01 AM, Justin Piszcz wrote:
> Hi,
>
> Could you please elaborate on
Hi,
Could you please elaborate on this?
Additionally, what are you (and others) using when it comes to the
fiber side on the media server? QLogic? Emulex?
Have you found any workarounds?
Justin.
On Tue, Apr 10, 2012 at 11:42 AM, nbuser wrote:
> We also face this issue where we have to reseat
We also face this issue where we have to reseat the drive's fibre cable and
power recycle the drive. In our environment we have HP LTO-5 in Quantum
i6000 series tape library. Problem is sometimes drives go down and we have
to do the above mentioned steps to bring them UP. We also have encryption
e
day, April 10, 2012 8:19 AM
To: Justin Piszcz; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] IBM LTO-5 (8.0gbps FC) / QLogic 2562-CK (8gbps
HBA) timeout question
Justin
What os are you using.
Which tape library?
Which firmware level are you using in the lto-5.
From: ver
@mailman.eng.auburn.edu
Subject: [Veritas-bu] IBM LTO-5 (8.0gbps FC) / QLogic 2562-CK (8gbps HBA)
timeout question
Hi,
Was curious if anyone had been running into timeouts with IBM LTO-5 drives in
heavily utilized environments with QLOGIC 2562-CK (8GBPS) HBAs?
Never saw this in smaller environments with MPX
Hi,
Was curious if anyone had been running into timeouts with IBM LTO-5 drives
in heavily utilized environments with QLOGIC 2562-CK (8GBPS) HBAs?
Never saw this in smaller environments with MPX <= 3 but now with MPX >= 6
some drives seem to be timing out and going into a "hung" state.
Was cur