You can load tapes from the master because it has the robot control
and just loads the tape into a position in the library. You can't
unload them, because the master server can't send the mt commands to
the tape drive to unload the tape that the robot can then grab.
Unless you know that you can f
On 10/9/07, Dave Markham <[EMAIL PROTECTED]> wrote:
>
> guys i have master server running sol8 connected to L700.
>
> L700 has 7 drives in it.
>
> Master can see 6 of them through fiber
>
> Med1 can see first 3 drives shared
> Med2 can see first 3 drives shared
>
> Med3 just added has access to dri
This is a perfectly good configuration. You've just uncovered a limitation
of using robtest where the robotic control host can't see the drives.
In an L700, I'd be surprised if you actually needed to issue the unload
command (lots of libraries can now accomplish the unload automagically while
doi
guys i have master server running sol8 connected to L700.
L700 has 7 drives in it.
Master can see 6 of them through fiber
Med1 can see first 3 drives shared
Med2 can see first 3 drives shared
Med3 just added has access to drives 5,6,7 and can see them fine.
I have just loaded a tape on the mas
29:11-13
585-216-0497 (w)585-472-2360 (c)
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
KeatingSent: Tuesday, May 30, 2006 3:03 PMTo:
veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] SSO
question
Assuming you have
several tapes drives share
. (Since we use 6mp2 ndmp allows us to use
SSO)
David
Spearman
County
of Henrico,Va.
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
KeatingSent: Tuesday, May 30, 2006 3:03 PMTo:
veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu]
Title: Message
Assuming you have
several tapes drives share among several media servers.
ie, 10 drives and 3
servers.
if you configure
each server to see all 10 drives and then configure a STU on each server to use
a max of 4 drives, you will encounter situations where there is demand fo
