Hi Munish,
The paths represents the device access path as seen by host. You
can change the paths only by adding more paths to the device by having
more HBAs or connecting any unused array port etc.
In 3.5 on Solaris, DMP and powerpath can coexist. You have to use
'vxddladm addforeign' com
Hi All,
We are running into an error when we try to take a snapshot using the
NetApps snapdrive 2.1 program. NetApps TSE suggests disabling enclosure-
based naming using the vxinstall script.
15:27:03 11/20/06 [1]E,2,14,MetaDevice::getDeviceConfig: Unable to read
config info for na1-u:/vol/me
> Hi ,
>
> I want to know how we can configure/change the no. of paths in Veritas DMP.
> I mean to say, when I run check with
>
> vxdmpadm getdmpnode enclosure=Disk
>
> It shows me 4 under PATHS coloumn, Can I change this to 6 paths and
> how can I do it ?
It's showing you the n
В Пнд, 27/11/2006 в 06:59 -0500, [EMAIL PROTECTED] пишет:
Hi, there,
> I have a Sun Fire V245 running Solaris 10 and Storage Foundation Std HA 5.0.
> The host has a pair of Emulex LP1-E hba cards and is connected to a
> Clariion CX-600. I am using the Solariss native emlx hba drivers. Solar
