sounds to me like it needs 16 chips of fresh new memory, and she will be good
as new!
Charles
Sent from the office of MacCaps.com
MACCAPS.COM
2 ROETHEL DRIVE
SUITE F
NOVI, MICHIGAN 48375
UNITED STATES
Thanks.
Charles Phillips
248 325 8812
On Jun 22, 2015, at 11:50 PM, Dan T. wrote:
Hey guys! Thanks for this group, I think its really going to help me.
I purchased a Mac 128k from eBay with an Sad Mac error code. At boot, it
shows "02" with a little graphic (a line of bits?) moving across the
bottom of the error code. My googling shows that it should be a memory chip
th
Hi Vasco,
Check the solder joints on L2 J1 and C5 - remove the solder, clean and
reconnect with new solder. Cracked or dry joints on these components can cause
collapsing lines either to a vertical line or a horizontal line.
As the problem gets steadily worse, it is likely the problem is caused b
i got a spare crt from a classic (1) , where are you from?
Also:
Notgoing totellyou:
I finaly replaced the flyback from 1 mac to the other, i found out that the
ground cable wasn't connected to the screen, someone had been messing with
the 128k and left it disconected, so i ended up not needi