Yep, All the way pas the inductor, everything seems .. Can't find an
schematic for the LC, but LCII and LCIII and compared circuit and seems to
be ok, no cap damage in the area, the EGRET chip was pretty soaked.. but
looks fine after a good cleaning..
William Stillwell
Board Member - Inspiration
On the LC 1 I just did, the 2200uf through hole cap stuck to the scsi
controller chip had shot a ton to goo onto the ADB traces and ate them
away. I had to run patch wires from the EGRET. Power was fine but not data.
Bomarc schematics for the LC II were correct for me to identify which EGRET
pins
Is your ground good? Do you have continuity on the data line?
-- Chris
--
--
-
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at
Anybody have any suggestions? I have a LC i just did a full cap kit on (
Logic and PSU ) it now boots, but no keyboard or mouse input, I have
confirmed 5v is going out the ADB port to the Keyboard.
Also, Anybody have an Performa/LC575 Case? I do not need the internals..
Mine shattered in a