how do i connect to the internet using a mac lc550 running os 7.5 with an
Apple Ethernet RJ45, 10Base-T, NuBus Card
--
--
-
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide
On 11/28/13 12:45 PM, G.David Green wrote:
how do i connect to the internet using a mac lc550 running
os 7.5 with
there was an network driver update in 7.5.3 or 7.5.5
an Apple Ethernet RJ45, 10Base-T, NuBus Card
if anything an lc pds card - no nubus slot
--
--
-
You received this m
how do i connect to the internet using a mac lc550 running os 7.5 with an
Apple Ethernet RJ45, 10Base-T, NuBus Card
--
--
-
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide
Sorry, I mis-spoke. What I intended to say was how does one connect a
gateway and cable to a Quadra 610. When I was up and running about 9
years ago I had a 56K modem connected to the back of my Quadra and I
got the internet OK that way. On my Quadra there is a connector on the
back with a <---> m
That's an AppleTalk port, that was what was used before Ethernet on
Macs. There are adapters (from Apple) that can convert AppleTalk to
Ethernet. I'm not sure if plugging the cable modem into that would
actually work; I think it probably depends on what OS you're running.
-Elliott
I'm running 7.5.
-Original Message-
From: vintage-macs@googlegroups.com [mailto:vintage-m...@googlegroups.com]
On Behalf Of Elliott Price
Sent: September 18, 2009 4:03 PM
To: vintage-macs@googlegroups.com
Subject: Re: Internet connection to a Mac Quadra 610
That's an Appl
On 18 Sep 2009, at 16:09:29 PDT, Doug wrote:
> I'm running 7.5.
>
>
> On Sep 18, 2009, at 3:51 PM, Doug wrote:
>
>>
>> Sorry, I mis-spoke. What I intended to say was how does one connect a
>> gateway and cable to a Quadra 610. When I was up and running about 9
>> years ago I had a 56K modem conn
At 16:34 -0700 9/18/09, Ken Daggett wrote:
>On 18 Sep 2009, at 16:09:29 PDT, Doug wrote:
>
>> I'm running 7.5.
>>
>>
>> On Sep 18, 2009, at 3:51 PM, Doug wrote:
>>
>>>
>>> Sorry, I mis-spoke. What I intended to say was how does one connect a
>>> gateway and cable to a Quadra 610. When I was up and
I have a couple of Apple ones. I haven't tested them out very much;
That's what I thought, though, it's AppleTalk.
-Elliott Price
Mac Computer Repair - Santa Barbara
Graphic Design - Artwork Setup
Websites - Low Cost Custom Websites
On Sep 18, 2009, at 5:07 PM, Doug McNutt wrote:
> A
--- On Fri, 9/18/09, Doug McNutt wrote:
> The AAUI connector would be a 15 pin D-like connector that
> came is two different pin densities usually with a sliding
> lock mechanism.
AUI used the same type of connector as Mac monitors and PC joysticks. There's
plenty of damage potential available
You need an AUI/Eithernet adaptor, I also have one of those. $5.00 +
shipping but in you case if you are still getting the floppy drive I'll add
it if you want.
On Fri, Sep 18, 2009 at 6:51 PM, Doug wrote:
>
> Sorry, I mis-spoke. What I intended to say was how does one connect a
> gateway and ca
Doug McNutt wrote:
> At 16:34 -0700 9/18/09, Ken Daggett wrote:
>> On 18 Sep 2009, at 16:09:29 PDT, Doug wrote:
>>
>>> I'm running 7.5.
>>>
>>>
>>> On Sep 18, 2009, at 3:51 PM, Doug wrote:
>>>
Sorry, I mis-spoke. What I intended to say was how does one connect a
gateway and cable to a Qu
12 matches
Mail list logo
