Hello Dave,
Farnell UK have these;
http://uk.farnell.com/w/c/batteries-chargers/batteries-non-rechargeable?battery-size-code=2-3aa
Best Regards,
Laurence Motteram
Calibration & Service Manager
Scientific Devices Australia
Ph: +61 (0)3 9569 1366
M: +61 (0)425 765 019
www.scient
Maybe look at the SRD1 from Stanford Research Systems? See
http://www.thinksrs.com/products/DG645.htm
If you need the whole generator, maybe the SG382 with the optional rear panel
clock outputs http://www.thinksrs.com/products/SG380.htm
Best Regards,
Laurence Motteram
Calibration & Ser
Stanford Research Systems have the SR560 stand-alone and the SIM910 and SIM911
amplifiers. The SIM modules can be used without the mainframe.
Good gear, but possibly outside of budget as new.
Best Regards,
Laurence Motteram
Calibration & Service Manager
Scientific Devices Australia
Ph:
I would just check that all of the DCV ranges were reasonably accurate
(50ppm???) and were linear at e.g. 0V, +/- 0.5V, 1V, 1.5V, 1.9V.
Best Regards,
Laurence Motteram
-Original Message-
From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of MailLists
Sent: Tuesday, 20
than
simple drift.
Best Regards,
Laurence Motteram
-Original Message-
From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of MailLists
Sent: Tuesday, 20 January 2015 6:53 AM
To: volt-nuts@febo.com
Subject: [volt-nuts] Datron 1281
Dear all,
got one of the (in)famous subj
Keithley offer a Low Level Measurements Handbook that may be of interest. Go
to www.keithley.com, Knowledge Centre. The digital book is a free download
(requires registration). You may be able to get a paperback copy from your
local Keithley rep just for the asking.
Regards,
Laurence
to several
interrelated compromises.
Laurence Motteram
From: volt-nuts-boun...@febo.com [volt-nuts-boun...@febo.com] on behalf of
Joseph Gray [jg...@zianet.com]
Sent: Sunday, 18 August 2013 2:47 PM
To: Discussion of precise voltage measurement
Subject
I have seen a few Datron units with flickering or unstable displays that came
up perfect when the display power supply electrolytic was replaced.
Regards,
Laurence Motteram
-Original Message-
From: volt-nuts-boun...@febo.com [mailto:volt-nuts-boun...@febo.com] On Behalf
Of ed breya
,
Laurence Motteram
-Original Message-
From: volt-nuts-boun...@febo.com [mailto:volt-nuts-boun...@febo.com] On
Behalf Of Tony Holt
Sent: Wednesday, 11 July 2012 8:09 AM
To: volt-nuts@febo.com
Subject: Re: [volt-nuts] HP 3458A DC current accuracy
Frank,
Thanks for taking to trouble to respond. Its