Would that be at the maximum temperature? Service would be at room temp.
Sounds like a good excuse, right?
- Original Message -
From: "Mark Sims"
To:
Sent: Friday, August 29, 2014 2:28 PM
Subject: [volt-nuts] Fluke 5200A extender board.
Those are not holes... they ar
Learn something new every day. Thanks.
- Original Message -
From: "Mike S"
To:
Sent: Friday, August 29, 2014 2:27 PM
Subject: Re: [volt-nuts] Fluke 5200A extender board.
On 8/29/2014 2:16 PM, Tom Miller wrote:
Did you remove the two holes?
:)
You mean the two pin 1
Those are not holes... they are polarity markers on the silkscreen for the
connectors.
I do have one concern about doing the extender with ribbon cable. It is rated
for 300V and three of the card slots do have 300V on them.
_
On 8/29/2014 2:16 PM, Tom Miller wrote:
Did you remove the two holes?
:)
You mean the two pin 1 markers on the silkscreen?
___
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
Did you remove the two holes?
:)
- Original Message -
From: "Mark Sims"
To:
Sent: Friday, August 29, 2014 1:53 PM
Subject: [volt-nuts] Fluke 5200A extender board.
5200A extender cables are a go! Connectors and boards are on order (from
a different board fab in Hong
5200A extender cables are a go! Connectors and boards are on order (from a
different board fab in Hong Kong this time). One board goes on each end of the
extender. Boards are connected by a 50 pin and 40 pin ribbon cable.
__
o.com
Subject: [volt-nuts] Fluke 5200A extender board.
Ok, I did a 5200A extender cable board layout. It has headers for a 50 pin
and 40 pin ribbon cable. One copy of the board would be on each end of the
cable, with the edge connector soldered to one of the boards.
So, how many people are inter
Hi all,
Thankyou to all who replied with suggestions and information about this
extender board,
I have looked up the surplus store as suggested and found they do have stock of
the 43/86 card edge connectors. Something I have missed in my searches.
Another contributor has given me
Ok, I did a 5200A extender cable board layout. It has headers for a 50 pin
and 40 pin ribbon cable. One copy of the board would be on each end of the
cable, with the edge connector soldered to one of the boards.
So, how many people are interested in a 5200A extender cable? Depending upon
q
There is also one listed on Ebay for $9...
http://www.ebay.com/itm/TRW-Cinch-50-86C-30-43-Pos-Double-Wire-Wrap-PC-Edge-Connector-New-Old-Stock-/171213916405?pt=LH_DefaultDomain_0&hash=item27dd2508f5
If you have access to a PCB layout program you can easily make the circuit
board/edge tabs. OSHPAR
" together which I
don't want to do.
I will do a PM to you with a pdf attached of the backside of the
extender.
Bill
- Original Message -
From: "Kgoodhew"
To:
Sent: Wednesday, August 27, 2014 11:44 PM
Subject: [volt-nuts] Fluke 5200A extender board.
> Hi,
Hi Ken,
Nigel is setting you on the right track with Vectorbord. I have used
them for the edge connectors over the years with good results. I don't
know if you are able to use Digikey of not but they list a 3690-26 ($80)
that will be easy to modify to work for your project. I probably
should
Hi Ken,
I don't know if it helps but there's a 43/86 edge connector offered here
for 14USD, (12USD for 5+)..
https://www.surplussales.com/ComputerAccess/con_edge.html
Single and double sided PCBs with 0.1 inch spaced strips were quite
common at one time as part of the Veroboard range
If it should help, most connector mfrs will make up a small run to order -
small typically meaning 30 or so.
If you are mega lucky (as I once was) you sometimes find they have one or two
hanging around (worth a telephone call) ...
Regards,
David Partridge
Hi,
The pin spacing on the card edge connectors is 0.1" (2.54 mm) and is a
43/86 dual row socket.
I know what the extender looks like as I found one on ebay several months ago
that had already sold for $50 (damm it!!) and I have been looking ever since,
but it had a picture of it.
It is
What is the pin spacing on the edge 5200a connector?
BTW, I got in my circuit boards for the TM500/5000 and HP5370 extenders from
China. They look great. I am now waiting for the rest of the edge connectors
to arrive. They have been shipped... from the US. Should be here in a day or
two.
Hi all,
Over the last 6 months I have been steadily repairing a
faulty 5200A that I brought, it had numerous faults in the power supply
regulator and power amplifier boards that I have managed to repair with a
lot of difficulty as I do not have an extender board to operate the boar
17 matches
Mail list logo
