Hi,
The first question is, what do you need to power that's 2KW? And what
ever that is, do you need that much accuracy at 2KW! :)
Having a couple of 1.2KW power supplies on the bench as I type this, I
tend to agree that that level of accuracy probably isn't needed. If this
were my supply, a
Ltd)
Sent: Tuesday, May 17, 2016 4:59 AM
To: Discussion of precise voltage measurement
Subject: [volt-nuts] Suggestions for 10 milli Ohm 0.04 % 100 W resistor
I have an HP 6674A power supply with option J06, which means that the PSU is
70 V @ 30 A rather than the standard 60 V @ 35 A .
I&#x
I have an HP 6674A power supply with option J06, which means that the PSU
is 70 V @ 30 A rather than the standard 60 V @ 35 A .
I've replaced a couple of bits in this and will need to replace some more,
so it would be prudent to get this calibrated.
The service manual calls for a 8.5 digit 3458A
