that was much too small
to be seriously dangerous. He was not able to visualize the future.
Dave
-Original Message-
From: Eric Walker eric.wal...@gmail.com
To: vortex-l vortex-l@eskimo.com
Sent: Sat, Mar 21, 2015 12:45 am
Subject: Re: [Vo]:Am I the only one
On Fri, Mar 20, 2015
If you admit that the law of trajectory of planet was initiated by a mystic
astrology fan , Keppler.
that an integrist opposed to moder mathematic (differential calculus),
defending old greek math (geometry), proposed the best theory, when he was
not doing fringe hopeless nuclear chemistry (sorry
to prove the exact value of COP, but at least you would
know that it is greater than unity.
Dave
-Original Message-
From: Jones Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 10:17 am
Subject: RE: [Vo]:Am I the only one..
Vorticians
Vorticians,
Here is an inexpensive and rather visually impressive way for anyone to do an
*additional* side-by-side comparison of two filed tubes. The two filled
comparison tubes are otherwise identical but one is loaded with a hydrogen
source and the other is a control with no hydrogen.
heating that is only applied to the fuel
plus without any other coils.
Why not use the normal easy to measure systems?
Dave
-Original Message-
From: Jones Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 10:48 am
Subject: RE: [Vo]:Am I the only one
Hi Dave,Max Planck once said: a new scientific truth does not triumph by
convincing its opponents and making them see the light, but rather its
opponents eventuallydie, and a new generation grows up that is familiar with
it.Hauke
Matter of fact, the windings of the two tubes to be tested can be
cross-connected as one circuit so that induced power is identical
* Start with an 1800 watt induction “hob” or hot plate - $70 from
Amazon.
http://www.amazon.com/Rosewill-1800-Watt-Induction-Stainless-RHAI-13001/dp/B
On Fri, Mar 20, 2015 at 12:02 PM, David Roberson dlrober...@aol.com wrote:
During the meeting he spoke of the limitations to output power that they
had so we did not have to worry about them becoming the death rays that
were being shown in movies about bad aliens.
He did not know about the
From: David Roberson
* That would ensure that the induced current within the coils was very
close. If the induction heater operates at 60 hertz then you are going to have
a very hard time getting enough current to flow inside the coils. This is
because the resistance of the wires is
:05 am
Subject: RE: [Vo]:Am I the only one..
From: David Roberson
Ø That would ensure that the induced current within the coils was very
close. If the induction heater operates at 60 hertz then you are going to have
a very hard time getting enough current to flow inside the coils
Now, science predicts supersymmetry(SS). SS predicts how the 3 forces of
nature(weak, strong, EMF) must come together at extremely high temperatures and
energies.
To the shock and chagrin of science, supersymmetry will not be found by the
LHC. LENR provides the real way, an
the DC
input power into pellet heating. But, it takes very careful and skillful
design to make it happen.
Dave
-Original Message-
From: Jones Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 12:20 pm
Subject: RE: [Vo]:Am I the only one..
Dave
with a truly
open mind? I have seen plenty of evidence that this is true.
Dave
-Original Message-
From: Hauke Hein hhe...@hotmail.com
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 11:54 am
Subject: [Vo]:Am I the only one
Hi Dave,
Max Planck once said: a new
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 2:10 pm
Subject: Re: [Vo]:Am I the only one
Most if not all of the well accepted science prediction/discoveries were
initially predicted by mathematical extensions of existing theory. The Higgs
had to be real to make the standard model
power into pellet heating. But, it takes very careful and skillful
design to make it happen.
Dave
-Original Message-
From: Jones Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 12:20 pm
Subject: RE: [Vo]:Am I the only one..
Dave
Ø Jones
it
happen.
Dave
-Original Message-
From: Jones Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 12:20 pm
Subject: RE: [Vo]:Am I the only one..
Dave
Ø Jones, even at 40 kHz it is going to be extremely difficult to get enough
vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 11:54 am
Subject: [Vo]:Am I the only one
Hi Dave,
Max Planck once said: a new scientific truth does not triumph by
convincing its
opponents and making them see the light, but rather its opponents
eventually
die, and a new generation grows up
Beene jone...@pacbell.net
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 11:05 am
Subject: RE: [Vo]:Am I the only one..
*From:* David Roberson
Ø That would ensure that the induced current within the coils was
very close. If the induction heater operates at 60 hertz
Lennart, I think Blaze is referring to the poor state of the laboratory,
not to the people in general.
seen plenty of evidence that this is true.
Dave
-Original Message-
From: Hauke Hein hhe...@hotmail.com
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 11:54 am
Subject: [Vo]:Am I the only one
Hi Dave,
Max Planck once said: a new scientific truth does not triumph
to control the
LENR reaction with a smaller more diffuse fuel loading.
Bob
- Original Message -
*From:* David Roberson dlrober...@aol.com
*To:* vortex-l@eskimo.com
*Sent:* Friday, March 20, 2015 7:58 AM
*Subject:* Re: [Vo]:Am I the only one..
That would ensure that the induced
: Friday, March 20, 2015 7:58 AM
Subject: Re: [Vo]:Am I the only one..
That would ensure that the induced current within the coils was very close.
If the induction heater operates at 60 hertz then you are going to have a very
hard time getting enough current to flow inside the coils
Dave
Ø Jones, even at 40 kHz it is going to be extremely difficult to get enough
current to flow inside a coil of wire. Remember, they normally drive the
expansive sheet of resistive metal that has an effective resistance that is
much less than an ohm. The coils that we are using is
.
Do you think that most people are not capable of thinking with a truly open
mind? I have seen plenty of evidence that this is true.
Dave
-Original Message-
From: Hauke Hein hhe...@hotmail.com
To: vortex-l vortex-l@eskimo.com
Sent: Fri, Mar 20, 2015 11:54 am
Subject: [Vo]:Am I
, 2015 12:20 pm
Subject: RE: [Vo]:Am I the only
one..
Dave
Ø Jones, even at 40 kHz it is going to be extremely
difficult to get enough current to flow inside a coil of wire. Remember,
they normally drive the expansive sheet of resistive metal that has an
effective resistance that is much less
.. that wants the replication to be real so that the global energy /
scientific revolution starts in some old fringe Russian scientist's living
room??
Eric--
I second your comments.
Bob
- Original Message -
From: Eric Walker
To: vortex-l@eskimo.com
Sent: Thursday, March 19, 2015 9:22 PM
Subject: Re: [Vo]:Am I the only one..
On Thu, Mar 19, 2015 at 7:27 PM, Blaze Spinnaker blazespinna...@gmail.com
wrote
On Thu, Mar 19, 2015 at 7:27 PM, Blaze Spinnaker blazespinna...@gmail.com
wrote:
.. that wants the replication to be real so that the global energy /
scientific revolution starts in some old fringe Russian scientist's living
room??
Personally, I could not think of a more just reward to the
28 matches
Mail list logo
