When I replicated the ball-bearing (marinov) motor about 12 years ago, I
thought it might have
something to do with longitudinal forces ala the Graneaus (Ampere-Neumann
electrodynamics), since it
only seemed to manifest with large currents. I didn't have an amp meter back
then, but what kind
V,
Today, went out and got a nice power supply for a Marinov bearing motor. 1200
ampere jump starter box.
Two high quality RBI ball bearings, 5/8 shaft size, were purchased. Mated them
to a shaft with an aluminum flywheel on the end, used a couple U bolts to hold
the bearings to a wooden
On Fri, 26 Jun 2009, Harry Veeder wrote:
similar to this?
http://www.youtube.com/watch?v=g60okBMeTKoNR=1
And the rotor of a DC motor is already a ball bearing motor! I have
several of these I could pull out of the stator magnets. Just hook it
to a few hundred amps? See
On Jun 25, 2009, at 8:30 PM, Harry Veeder wrote:
similar to this?
http://www.youtube.com/watch?v=g60okBMeTKoNR=1
harry
Here are some more:
http://www.youtube.com/watch?v=-1PgR1hyXHsfeature=related
http://www.youtube.com/watch?v=OJK-W9FwjMc
The following is a very different design, but
V,
Built a quick and dirty one tonight. Does work, not well, but it does at least
take far longer than it should to spin down. The bearings were basically cheap
crap from Valu Hardware. Need to get something better.
Power source was a moderately charged 12V Autocraft lawnmower battery,
similar to this?
http://www.youtube.com/watch?v=g60okBMeTKoNR=1
harry
- Original Message -
From: Kyle Mcallister kyle_mcallis...@yahoo.com
Date: Thursday, June 25, 2009 10:19 pm
Subject: Re: [Vo]:Marinov's ball-bearing motor
V,
Built a quick and dirty one tonight. Does work
6 matches
Mail list logo
