Forgot to list the video URL; http://www.youtube.com/watch?v=rC5sbV-1LmI Pioneering the Applications of Interphasal Resonances http://tech.groups.yahoo.com/group/teslafy/
--- On Wed, 1/12/11, Harvey Norris <harv...@yahoo.com> wrote: > From: Harvey Norris <harv...@yahoo.com> > Subject: 3rd Embodiment of the Wireless Tesla Coil; > To: vortex-l@eskimo.com > Date: Wednesday, January 12, 2011, 10:49 AM > The third > embodiment is made by using another 2.4H/50 nf LC loop that > instead is placed underneath the 266 primary; now making for > two secondary air core tuned resonances on both polar areas > of the 266 primary. As formerly noted by scopings the bottom > magnetic field emission is lower then the top, and it also > contains a 1/6th cycle ripple, and is not sinusiodal like > the top emission. As a result the bottom layer phase no 1 > recieves a lower 110 volts vs the top layer phase 3 > producing ~ 190 volts. These two secondary air core voltages > may be added together for a load application by allowing a > common line between the isolated > voltage rises, in which case the delivery comes close to > 300 volts. > Thus in the first embodiment a line > coupled, interphasal resonance acquired from the 666 machine > used to provide preliminary voltage rise to a secondary > interphasal load as a 2.4 H/50 nf series combination as > primary excited an identical air core secondary as 2.4 H/50 > nf loop, and it produced 110 volts at arc gap with an > unenergized alternator field. > In the second embodiment the > primary instead was constructed as a complete change of > strategy employing non resonant layerings of all three > phases using spirals with large mutual induction, low 1/4 > ohm resistance configured at 1/6 cycle interaction by making > polarity reversal wiring of the middle layer, termed a 266 > primary 3 phase layering. Placing the 2.4H/50 nf loop on top > of this assembly then delivered almost 200 volts to arc > gap. > Then, as can be imagined the 3rd > embodiment uses the totality of the polar areas of the 266 > wafering by adding another air core secondary to the weaker > bottom magnetic emission, and then combining the two by > autotransformer means,whereby a common line between the > isolated voltage rises are provided, where this method then > delivers voltages near 300 volts > > The power factor corrected 266 primary itself seemed > disapointing initially,until further considerations were > shown, where at least Q factors of 5 can be made, where this > will involve further expeditions into this unknown > territory. A ferrite heating demo is quickly now planned, > but for now the actions of a non resonant 266 primary will > first be shown. The problem that developes is that the > bottom layer conveys energy in a different way then the top > layer, as will be shown... > Sincerely Harvey D Norris. > > > Pioneering the Applications of Interphasal Resonances > http://tech.groups.yahoo.com/group/teslafy/ > > > >
