Hello!
On my ALIX is voyage 0.7.0 running.
An uname -a says:
Linux alix 2.6.32-voyage #1 PREEMPT Mon Jan 17 07:48:25 GMT 2011 i586
GNU/Linux
How can I update to 0.7.5?
Here is my /etc/apt/sources.list
---
# /etc/apt/sources.list
deb http://ftp.de.debian.org/debian/ sq
Hello!
I would use an BMP085 for air pressure measuring. (sensor is ordered)
I have an ALIX1.D with voyage 0.6.5
So i could connect the sensor to J25 ( I2C ).
Can anyone give me a little guidance how i can "talk" with the sensor?
Must i use C, or can i also use perl?
Thanks for your help!
pli
Am 20.02.2011 20:43, schrieb Jon Meek:
Stefan - Check your logs, the dmesg command may be enough, or look in
/var/log. Do you have any lines like:
[25498.971441] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
EMI indicates electromagnetic interference, quite possible on a long
US
> apt-get install linux-image-2.6.26-2-486
> After installation, please get the bootloader in /boot/grub/menu.lst
The kernel-change to 2.6.26 was successfull.
Unfortunately the problem is the same.
After 3-5 readings the function stops.
What else can I do?
Greetings
Stefan
> If you question about some bugs in voyage kernel, I think you should install
> debian lenny kernel to see if it works too. If it works then switch to
> voyage 2.6.26 kernel series (0.6.5 uses 2.6.30 kernel).
Please can anybody give me a litte assistance in replacing the kernel?
I only know that
Hello List!
I have build a small weather station based on an Alix1.D and Voyage 0.6.5
On an USB-Port there is a USB Extender over LAN to gain the 20m Distance to
the weather receiver.
The receiver will be promptly recognized as /dev/ttyUSB0 (FT232RL)
The Problem is that the function fails after
Hello List!
I want to force an e2fsck on next boot because the fs is not clean.
All attempts with tune2fs -C -c -i and shutdown -rF are failed.
The e2fsck was not "fired".
What is going wrong?
Many Thanks
Pline Pa
___
Voyage-linux ma
Hello!
In Voyage 0.6.5 the CP210x from Silabs is not supported. ( Or is it? )
In the last 8h i try to build the rpm via the driver from silabs-site
and now i am very frustrated.
The ./makerpm throws tons of errors and i would not spend more time...
( rpm, make, kernel_sources are installed...
y' TSE" <
punky...@punknix.com>:
> Hi,
>
> All manpages are removed when building the distro. You need to reinstall
the packages back before you can browse the
> manpages of particular packages.
>
> Regards,
> Punky
>
> On 10/18/2010 2:40 PM, Pline Pa wrote:
>
Hello List!
I try to install the manpages on my 0.6.5 Installation with
remountrw
apt-get install man
apt-get install manpages
apt-get install manpages-dev
mandb
Man man works, but on all other i get allways an "man 7 undocumented"
What is going wrong?
Many THX
__
10 matches
Mail list logo