Hi Dave
Thanks, this looks like an extended version of
https://fd.io/docs/vpp/v2009/usecases/homegateway.html
I will take a closer look, especially at the ipv6 section because I was
already wondering how to do the things I'm currently doing with
radvd/wide-dhcpv6-client with VPP.
Another o
Am 17.01.22 um 21:53 schrieb René Weiss:
Hi Dave
Thanks, this looks like an extended version of
https://fd.io/docs/vpp/v2009/usecases/homegateway.html
I will take a closer look, especially at the ipv6 section because I was
already wondering how to do the things I'm currently doing with
ra
https://s3-docs.fd.io/vpp/22.02/usecases/home_gateway.html - I've used vpp as a
home gateway for years.
HTH... Dave
-Original Message-
From: vpp-dev@lists.fd.io On Behalf Of René Weiss
Sent: Monday, January 17, 2022 12:47 PM
To: vpp-dev
Subject: [vpp-dev] linux-cp + nat44 possible?
H
Hi
Is it possible to use linux-cp and nat44 together?
I'm currently playing with VPP to see if I would be able to use it on my
Linux home gateway (mostly as an iptables/nftables replacement).
And because there I have an external and (at least) one internal
interface I tried (unsuccessfully)
Thank you,
Your idea is the same as mine, all commands are executed for if_index 0. I
have already tried to go deeper, but this is out of my knowledge.
Regards
Petr
po 17. 1. 2022 v 14:50 odesílatel Pim van Pelt napsal:
> Hoi Petr, others,
>
> Petr, in case you were interested to take a look -
Hi Juraj,
Thanks for your reply.
I was able to get the things working with new commands.
Thanks,
Hrishikesh
On Mon, Jan 17, 2022 at 7:02 PM Juraj Linkeš
wrote:
> Hi Hrishikesh,
>
>
>
> The API has changed, try without the hyphen:
>
> ipsec sa add 10 spi 1000 esp tunnel src 192.168.1.1 tunnel d
Hoi Petr, others,
Petr, in case you were interested to take a look -- I became a bit less
lazy and started VPP in a debugger, and added a breakpoint in the
vnet_hw_interface_add_del_mac_address function.
DBGvpp# create sub HundredGigabitEthernet15/0/0 10
HundredGigabitEthernet15/0/0.10
DBGvpp
Hi Hrishikesh,
The API has changed, try without the hyphen:
ipsec sa add 10 spi 1000 esp tunnel src 192.168.1.1 tunnel dst 192.168.1.2
crypto-key 4339314b55523947594d6d3547666b45 crypto-alg aes-cbc-128 integ-key
4339314b55523947594d6d3547666b45 integ-alg sha1-96
Regards,
Juraj
From: vpp-dev@li
Hello,
It turned out that the problem was caused by the checksum offload set on
virtual interfaces on the sender side.
The workaround is to set the following on host A:
docker exec rvm-tester ethtool -K eth0 tx off
So, it's definitely NOT a vpp fault. Sorry for bothering you with this issue.
--
Hi All,
We are facing a random crash during the scale of MPLS tunnels(8000 mpls
tunnels). The crash has been observed multiple times and the call stack is
the same.
During the worker thread crash the main thread has executed the following
lines of code(between the barrier sync and release), please
Hoi,
I have seen that message, but it is not related to the Linux CP plugin, and
it seems benign -- that is to say, Linux CP and VPP work just fine even
though the error is emitted.
Without Linux CP enabled, the same message appears when adding an IP
address to a sub-int. I didn't look in to it ve
Thanks Neale for the response.
We are trying to simulate L3VPN usecase and want to maintain counters per
FEC(on both PE and P nodes).
Yes, we can achieve label swap/pop without tunnel interface too but that way we
are not maintaining per FEC counters. As per my understanding, with tunnels, we
Hello,
did you notice this error message from systemctl?
Message from systemctl status vpp-dataplane:
vnet[2526]: interface: hw_add_del_mac_address:
vnet_hw_interface_add_del_mac_address: Secondary MAC Addresses not
supported for interface index 0
Jan 17 03:16:05 stredni vnet[2526]: interface: hw
13 matches
Mail list logo