Hi all,
just installed yvatta and wanted to establish an ipsec vpn connection. When
entering the pre-shared-secret I receive the following message:
[EMAIL PROTECTED] set vpn ipsec site-to-site peer xxx.xxx.xxx.xxx authentication
pre-shared-secret 11([EMAIL PROTECTED]
[edit]
[EMAIL PROTECTED] com
Hi Robyn,
Currently I'm doing the tests in VMware because my physical test machine
has only one working NIC.
Since I'm limited testing in VMware I'm cautios with conclusions.
But bellow is what I have observed.
VMware Server 1.0.4 build-56528.
The machine behind Vyatta is a Windows 2003 Server SE R
Hi Dave and Robyn,
Robyn,
Thanks for the NAT exclusion solution.
Dave,
Once that article will be finished I will add a link there.
Things look good regarding the tunnel between Vyatta and ISA.
Except that it seems to be one ISAKMP Informational Exchanges after the
Quick Mode messages sent by Vyat
> Hi all,
>
> just installed yvatta and wanted to establish an ipsec vpn connection.
> When
> entering the pre-shared-secret I receive the following message:
>
>
> [EMAIL PROTECTED] set vpn ipsec site-to-site peer xxx.xxx.xxx.xxx
authentication
> pre-shared-secret 11([EMAIL PROTECTED]
Hi all,
just installed yvatta and wanted to establish an ipsec vpn connection. When
entering the pre-shared-secret I receive the following message:
[EMAIL PROTECTED] set vpn ipsec site-to-site peer xxx.xxx.xxx.xxx authentication
pre-shared-secret 11([EMAIL PROTECTED]
[edit]
[EMAIL PROTECTED] com
> I created a NAT Rule that forwards all traffic on port 25 from the
> external ip address of xx.xx.xx.xx to the internal ip address of
> 10.10.30.xxx on port 25. My problem is that all workstations on the
> internal network 10.10.30.X connect resolve mail.domain.com to port 25
> on the external ip
If I remember correctly, this issue was discussed on this mailing list a couple
months back, and the "dual NAT" solution was posted. You might want to try
doing a search with the terms "internal" and "DNS".
An-Cheng
Alex Lee wrote:
>> I created a NAT Rule that forwards all traffic on port 25 fr
> driveCan someone point me to where in the documentation
> this action is mentioned? Thanks.
The Quick Start Guide will tell you how to do this. Look for the section
titled "Installing to a Persistent Device." Page 50 in the VC3 Quick
Start.
-- Dave
___
Is this the posting you meant:
> Justin Fletcher jfletche at gmail.com
> Fri Jun 1 11:55:37 PDT 2007
>
> * Previous message: [Vyatta-users] nat internal-to-external
> * Next message: [Vyatta-users] VC2.1.1 updates in community/main
> repository
> * Messages sorted by: [ date ] [ thre
Hi Alex,
Finally found it:
http://mailman.vyatta.com/pipermail/vyatta-users/2007-August/001741.html
Actually, I used Thunderbird's search functionality, so it was much easier than
going through the archives. :)
You're right that we should probably provide a search function for the mailing
lis
You can use the site: operator on google. ie searching for:
interface site:mailman.vyatta.com
will return all pages (postings) with the keyword "interface" on the
site "mailman.vyatta.com"
--
Aubrey Wells
Senior Engineer
Shelton | Johns Technology Group
A Vyatta Ready Partner
just got vyatta, ran the cd, when i went to login using vyatta vyatta it
said that login failed... am i missing something? going to try using v2.2
--
R__|||C
|
___
Vyatta-users mailing list
Vyatta-users@m
Hello Aubrey,
Nacctd runs as a daemon, which on my system takes about 1mb of RAM. The CPU
load seems negligible. Not knowing how else to monitor processor usage over
time, I ran this as a script every two seconds for a couple of hours:
while true; do
ps aux | grep nacctd | grep -v 'grep' |
The login credentials are created on boot by rtrmgr from your config
file. If rtrmgr crashed for some reason then the credentials wouldn't
have gotten created. If you could log in i'd say check "ps - ef |
grep rtrmgr" to see if rtmgr was running and check /var/log/messages
for the reason it
Seems like a reasonable was to estimate to me. MySQL is my main
concern as well, but I can always host that externally. Thanks for
the info, I'm going to look in to this in more depth.
--
Aubrey Wells
Senior Engineer
Shelton | Johns Technology Group
A Vyatta Ready Partner
www
Hi Folks,
I'm new to Vyatta...I'm putting together my first production router. I
understand routing fairly well, but firewalling isn't my strong suite.
I have built an 8-Ethernet-port, no-moving-parts router and I have the
basics working.
eth0 will connect to the Internet over a new T1. I ha
It would probably be helpful if we could see your messages file. Try
this... if your vyatta box is connected to a dhcp subnet on the same
lan as your desktop, run "dhclient eth0" (or whatever interface) to
get it an ip (or assign one by hand), then ssh from your local box so
you can copy an
xorpsh should have dropped you to the vyatta cli. SInce it didnt and
it took 2 minutes for rtmgr it sounds like rtmgr crashed, so that's
the reason vyatta/vyatta doesn't work. Look further back in messages
and see if you can find the reason for rtmgr crashing.
--
Aubrey Wel
OK, I shouldn't have asked this one:
> 1) Are there any searchable mailing list archives?
From a previous posting by Aubrey Wells:
You can use the site: operator on google. ie searching for:
interface site:mailman.vyatta.com
will return all pages (postings) with the keyword "interface" on th
19 matches
Mail list logo