resolved: I had put
[[[yearbarometer]]]
barometer
yscale = 900, 1050, 10
I had to put:
[[[yearbarometer]]]
yscale = 900, 1050, 10
barometer
Il giorno sabato 11 marzo 2017 07:19:19 UTC+1, Paolo Benvenuto ha scritto:
>
> I want to set yscale for barometer
I want to set yscale for barometer plots so that it's a fixed range, so I
put something like
barometer
yscale = 900, 1050, 10
in the [ImageGenerator] section
I expressed the values in millibar, which is the unit used in the plots.
However, the automatic yscale is
used:
Hi,
The short answer to your question is no, nothing like that exists at the
moment. If you have your web server (or process that wil use
gauge-data.txt) on your weeWX machine then it is a simple matter for the
generated file to be saved wherever you want, but if you need to transfer
the file
Hi,
The reason is that you have set the path for your non-priveleged user but
not for the privileged environment that sudo wil use. Try the following
command:
$ sudo printenv
I'll bet the PATH environent variable doesn't include /home/weewx/bin.
Simplest solution, just type the path (you'll
I have tried sudo weewxd weewx.conf but I get an error message saying there
there is no command weewxd.
I installed using setup.py on ubuntu 16.04
I have since upgraded to ubuntu 16.10 in an attempt to fix a bluetooth
keyboard problem (unsuccessfully).
I put /home/weewx/bin on the PATH and have
Hi,
Your problem is nothing to do with the WMR200 driver but rather the
internal workings of the StdWXCalculate service. Since you have your hands
in wxservices.py, have a look at the do_calculations() method (circa line
174), you will see that the data packet provided to StdWXCalculate is
I might try that, in the meantime I patch wxservices.py with
def calc_extraTemp1(self, data, data_type):
if 'inTemp' in data and 'outTemp' in data:
try:
data['extraTemp1']= round(data['inTemp'] - data['outTemp'],1
)
except:
pass
I
Hello
for forecast i install xTide and xTide-Data-nonfree.
but xtide dont find a city of germany.
perhaps anyone have a idea, thx
pi@raspberrypi:~ $ tide -l "Hamburg"
-
XTide 2 Copyright (C) 1998 David
I removed the fake hardware clock from the problematic RPI. I am not so
sure about the other one.
Yes, installing an RTC would make sense, but there is no reason for me
personally.
I have seen the problematic device waiting for a valid time while the DHCP
server attempts to connect via Wifi,
michael,
there are a couple of issues at play here, but they all result from having
a bogus system time.
1) if the system time is bogus, then anything that weewx saves to the
database will have a bogus time stamp. this results in current weather
data being saved with a timestamp of 1970, or
Thank's Gary.
I was not using correct format !
El viernes, 10 de marzo de 2017, 11:30:18 (UTC+1), gjr80 escribió:
>
> Hi,
>
> Are you specifying your ImageGenerator colours in the correct format? The
> available formats are listed in the comments at the start of the
> [ImageGenerator] stanza
Hello wmr300 friends.
I want add a second wireless transmiter to my wmr300.
I will use :
One transmitter (Oregon *STC300)* using channel 1 for: Temp, Humid and Rain
Another transmitter (Also STC300) using channel 2 for: Wind
I need to read all this sensors like one only weather station.
WMR-300
Hi Mathias,
I am a new TFA Nexus owner and when I enter level pressure data e.g. 1003
hPa, and altitude 0 m the estimated by Nexus local
pressure is 996 hPa and the altitude is 61 meters. The real values are 1004
hPa and 50 meters respectively.
What do you think about this? How is it affected
Hi,
Are you specifying your ImageGenerator colours in the correct format? The
available formats are listed in the comments at the start of the
[ImageGenerator] stanza in the Standard skin.conf (extract below):
# Colors can be specified any of three ways:
# 1. Notation 0xBBGGRR;
#
Hello.
I am trying configure my own images colours under [ImageGenerator].
My "problem" is imagegenerator is not showind correctly the colours.
Using the same colour code in HTML i have the correct colour, but is
completly different using it in images.
Am i missing anythink?
I want use blue
15 matches
Mail list logo
