I have a weewx installation running ust fine under an ancient DietPi OS.
So ancient that I can't update the OS. So I have configured up a new card
with PiOS.
I went through the apt install for weewx and found it was all a bit more
different than I was happy with
Is there any way I can
Thanks again to both, this got me an idea about how things are working!
I was asking about testing because my Station/Driver does not provide any
"extra-fields" which are not saved, just fields included in the schema. I
should have said that I am the Dave from the weewx-wdc Skin, whom John
ment
Not sure what you're looking for in terms of an answer here. Yes there is
a third-party extension if you attempt to look for it even minimally. Yes
it requires a modern python version. Yes there is an easy way to integrate
it. Install and configure that extension like you would do with any o
Hello Tom,
what a shame. Are there alternatives?
Tom, do you plan to add it later?
Air quality becomes just as important an index as temperature or humidity
now...
*PS: Thanks also for all these years of support and this beautiful
software.*
Yves,
YMartin.com/meteo
Le jeudi 29 juin 2023 à 16 h
Thank you. Yes, I would like to keep the 60 seconds for the remaining
values though.
I'll have to do some more research on that.
Is there actually a restful service that can export in ecowitt format that
I could test as an alternative? Meteotemplate could also handle this with a
plugin.
Tom Ke
You have ET in the database, so the problem must be with the "meteotemplate
restful service." I don't know anything about that, so I can't help you
with it.
I will note that you have a 60 second archive interval, so individual ET
values will be quite small. To make any sense, the upload service sh
We didn't introduce the apt repository until v4.0. So, if you want to
install V3.9, you'll have to do it from the archive
https://weewx.com/downloads/released_versions/
But, what's wrong with the current v4.10 version? It's perfectly stable.
Are you experiencing / hearing something different?
-tk
Hello, Yves
Unfortunately, no, there is no driver for the Davis AirLink.
On Thu, Jun 29, 2023 at 1:24 PM Yves Martin wrote:
> Hi Vince,
>
> I'm using the "Davis Air Quality Sensor" with my phone (Installed here
> http://45.73.0.50:8080/v1/current_conditions)
> Here is the information about the
Hi Vince,
I'm using the "Davis Air Quality Sensor" with my phone (Installed here
http://45.73.0.50:8080/v1/current_conditions)
Here is the information about the device:
https://www.davisinstruments.com/pages/airlink
I am looking to integrate this sensor to my meteo station ...
(YMartin.com/met
What have you searched for ?
(hint - try some searches)
I would be surprised if anything modern works with python2...
On Thursday, June 29, 2023 at 1:00:35 PM UTC-7 Yves Martin wrote:
>
> 15 h 58 (maintenant)
>
>
>
> Hi,
>
> Is the Devis "Air Quality Sensor" is natively supported in the l
15 h 58 (maintenant)
Hi,
Is the Devis "Air Quality Sensor" is natively supported in the last version
of weewx? (4.9.1)
I'm using Python 2.7.3 (I've heard I will need Python 3...)?
I've added a link to my meteo station and I will be happy to get the data
and add these information in my
Hi,
Is the Devis "Air Quality Sensor" is natively supported in the last version
of weewx? (4.9.1) (http://45.73.0.50:8080/v1/current_conditions)
I'm using Python 2.7.3 (I've heard I will need Python 3...)?
I've added a link to my meteo station and I will be happy to get the data
and add these
The upgrade do not work on my old Debian 7.
So I created a new Debian (10) installing Python 3.9.
I will install the old version 3.9.2-1 on it, then I will copy the full
config and database and then I will upgrade.
But when I want to install this old version (weewx_3.9.2-1_all.deb) I have
this
Thanks for the solution.
The reset of console did not work, but the ":wee_device --dump" and then "
wee_device --clear-memory" got everything functioning.
On Thursday, June 29, 2023 at 10:18:41 AM UTC-4 Tom Keffer wrote:
> Classic case of corrupt memory in the VP2 logger.
>
>
> https://gith
SQLite version 3.37.2 2022-01-06 13:25:41
Enter ".help" for usage hints.
sqlite> select dateTime, outTemp, outHumidity, radiation, windSpeed, ET
from archive order by dateTime desc limit 20;
1688052780|71.1|69.0|34.91|2.0|4.59802529960867e-05
1688052660|71.1|69.0|34.14|0.9|4.60340718954392e-05
1
I've finally compiled/installed version 3.9.17 of Python ... it seems to be
the more last stable and safe version ...
I hope I will run a couple of years yet with this wonderfull weewx software!
Yves,
YMartin.com/meteo
Le jeudi 29 juin 2023 à 10 h 39 min 01 s UTC-4, Yves Martin a écrit :
> Hi,
Thank you Rainer, I got it.
I also tried with sniff mode, but that didn't work.
What was missing was the part with the setup of the custom server.
Now everything works fine.
Thank you very much for your help!
Rainer Lang schrieb am Donnerstag, 29. Juni 2023 um 14:05:34 UTC+2:
> it's not
>
Hi,
OK ... (I'm like my customers, I do not read all !... Sorry for that).
I'm planing to upgrade the OS (not too much space on the SD card after all
these years, and in the same time upgrading the Debian distribution (to
version 10).
Legacy version integrate Python 2.7. What version of Python
Classic case of corrupt memory in the VP2 logger.
https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#weewx-generates-html-pages-but-it-does-not-update-them
On Thu, Jun 29, 2023 at 6:57 AM Beechwood Lakes wrote:
> THIS time I think I have the log files attached.
>
> On
Generally, you can upgrade directly to the last version.
It's all in the upgrade guide:
http://www.weewx.com/docs/latest/upgrading.htm
On Thu, Jun 29, 2023 at 6:52 AM Yves Martin wrote:
> Thanks a lot!
>
> From version 3.9.2, can I upgrade to the last version or should I upgrade
> progressive
Thanks a lot!
>From version 3.9.2, can I upgrade to the last version or should I upgrade
progressively?
Regards,
Yves
Le jeudi 29 juin 2023 à 09 h 30 min 10 s UTC-4, Tom Keffer a écrit :
> WeeWX Version 4 works with Python 2.7, so you simply need to upgrade WeeWX.
>
> On Thu, Jun 29, 2023 at 6
WeeWX Version 4 works with Python 2.7, so you simply need to upgrade WeeWX.
On Thu, Jun 29, 2023 at 6:15 AM Yves Martin wrote:
> Hi,
>
> I'm using an old version (but very stable) of weewx (3.9.2) using Python
> 2.7.3.
>
> Is it possible to upgrade to version 4 with this Python version or do I
>
Hi,
I'm using an old version (but very stable) of weewx (3.9.2) using Python
2.7.3.
Is it possible to upgrade to version 4 with this Python version or do I
need to upgrade Python?
If I need to upgrade Python, do you have some HowTo somewhere for weewx?
PS: I'm using Linux meteo-raspi 4.1.19-v
it's not
mode = sniff
it's
mode = listen
no pcap_filter needed
in fact the descrition of the use of the interceptor driver with an
Ecowitt console describes that 😉
the entries should be
**
mode = listen #can be omitted as it is the default mode
device_type = ecowitt-client
24 matches
Mail list logo