Okay. I wiped the SD card and started over. Turns out I was installing the
API driver using wee_extension and that was causing issues.
However, it doesn't seem to be logging data for more than an hour now. This
is the issue I had before and why I started over again. Is there anyone
There is currently NO local access API to the new LCD touchscreen (6313)
console. You would have to read back data from weatherlink.com
The screenshot from Philip is from a WiFiLogger2, a third party logger that
fits in the old Davis consoles and among other functions can emulate the
Davis
No worries. I'm going in another direction with the ambientweatherapi
instead. Cheers.
On Monday, December 4, 2023 at 8:16:57 PM UTC-8 Bruno BORDAS wrote:
> I'm not in a position to test right now.
> I would try to merge the compose file from network with the main one. Try
> to define the
Ugh. I hadn't run the sudo -H pip3 install -r requirements.txt portion.
However, when I do run that and restart the service it is now starting but
throwing a different set of errors.
Dec 13 09:46:52 raspberrypi python3[1822]: weewx[1822] CRITICAL __main__:
__init__() takes 1
Hello all,
I had this somewhat working last week but then it just stopped collecting
data so I had to start over. Now, when I'm following all the steps to
install WeeWX with the AmbientWeatherAPI it is not working. I am getting
the following errors:
Dec 13 09:27:20 raspberrypi python3[657]:
* On 2023 13 Dec 09:53 -0600, rose032...@gmail.com wrote:
> Nate, That a good idea. So:
> Starting Nmap 7.80 ( https://nmap.org ) at 2023-12-13 08:48 MST
> Nmap scan report for 10.10.48.50
> Host is up (0.0098s latency).
> All 65535 scanned ports on 10.10.48.50 are closed
Typically, if there were
Hi Mazufa,
My station uses a fork of NeoWX Material (www.360shetland/weather), I've
added in loads of extras, and there's a couple of very good and reasonably
active forks on Github: https://github.com/seehase/neowx-material.
To add in radar / webcam you can create inc files with iFrames then
Nate, That a good idea. So:
Starting Nmap 7.80 ( https://nmap.org ) at 2023-12-13 08:48 MST
Nmap scan report for 10.10.48.50
Host is up (0.0098s latency).
All 65535 scanned ports on 10.10.48.50 are closed
☹
I will be following the other thread as well. I really am against paying for
our own data.
