Hello everyone. I installed weewx for the first time today on a Raspberry Pi Zero 2W, using a Fine Offset 3081 station that I used for about 10 years until the local cockatoos decided it would be fun to dismantle it!
It came up on the second attempt after a few minor adjustments to the config file, paths, etc. (I used the pip install method on Debian 11). The hardware console is operating correctly as expected, but weewx is giving me the following error: Feb 6 22:26:01 bigfish-08 weewxd[1909]: WARNING weewx.qc: 2024-02-06 22:26:02 AEDT (1707218762) LOOP value 'pressure' 0.0 outside limits (24.0, 34.5) As the value displayed on the console (roughly) agrees with a BME680 I have running, can anyone suggest where I should start trying to solve this? Note that I am configured for metric with barometric pressure in hectopascals (hPa) which is currently just over 1010hPa, so I am at a bit of a loss as to why it is showing '0.0' and where the range "24.0 to 34.5' comes from. The error has been consistent for the 9 hours it has been running. Thanks for any advice you can offer. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f49665de-94c1-4217-bb14-87ad6e0c51b8n%40googlegroups.com.
